I just got this and it's pretty good. If it had a bent mouthpiece it would be excellent, but it's a little tall. I'll put up a video this afternoon.
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
I just got this and it's pretty good. If it had a bent mouthpiece it would be excellent, but it's a little tall. I'll put up a video this afternoon.
subway13029
Well-Known Member
It looks ok..will it stand on its own??
MGG
Well-Known Member
You mean without the glass stand? No, it won't.
subway13029
Well-Known Member
Yeah that was my question...
It will not stand on its own, though it feels very centered. I had it hooked to my ufo and while it was tall, it was certainly fun.
ragnorokk
DERP
Thx for putting the pinnacle water tool in the pic for comparison!It will not stand on its own, though it feels very centered. I had it hooked to my ufo and while it was tall, it was certainly fun.
@ragnorokk these are both resting on my desk and as you can see it is substantially bigger. It's really a nice piece that functions well, but to me it loses the hydrotube smallness factor. If the tube was bent at 45 degrees right above the recycler it would be easier to use. With either the Air or Nano on the bottom it's too long, but not by much. The draw is fairly smooth, and even filled beyond the safe point you aren't getting water into your mouth as far as I can tell. To send water back through and down to the bowl connector you have to either blow pretty hard or basically turn it on its side, at which point it comes out the top and bottom. Overall I rate it 7,842 on my scale of meaningless numbers that end in 42. So...fun for less then $30 but not a daily driver.
@Cannabis Connoisseur it is 18mm
http://m.dhgate.com/product/nectar-collector-kit-glass-bong-bubbler-glass/255757677.html
@Cannabis Connoisseur it is 18mm
http://m.dhgate.com/product/nectar-collector-kit-glass-bong-bubbler-glass/255757677.html
Last edited:
Cannabis Connoisseur
I LOVE LIFE
So That's a 18mm? If so link please!@ragnorokk these are both resting on my desk and as you can see it is substantially bigger. It's really a nice piece that functions well, but to me it loses the hydrotube smallness factor. If the tube was bent at 45 degrees right above the recycler it would be easier to use. With either the Air or Nano on the bottom it's too long, but not by much. The draw is fairly smooth, and even filled beyond the safe point you aren't getting water into your mouth as far as I can tell. To send water back through and down to the bowl connector you have to either blow pretty hard or basically turn it on its side, at which point it comes out the top and bottom. Overall I rate it 7,842 on my scale of meaningless numbers that end in 42. So...fun for less then $30 but not a daily driver.
Dangus
Yeah, well, that's just, like, your opinion, man.
I've only seen it in 14mm...
I stand corrected:
http://www.dhgate.com/product/nectar-collector-kit-glass-bong-bubbler-glass/255757677.html
Last edited:
J_ackson
It's always sunny in Colorado
I've never seen that except this, which could be what you want with a F/F adapter http://www.dhgate.com/store/product/male-and-female-adapter-ash-catcher-factory/259280824.html
subway13029
Well-Known Member
Its definate 18 mm
Cannabis Connoisseur
I LOVE LIFE
SOLD!!!! TO THE GUY WHO COULD NEVER HAVE ENOUGH GLASS!!!@ragnorokk these are both resting on my desk and as you can see it is substantially bigger. It's really a nice piece that functions well, but to me it loses the hydrotube smallness factor. If the tube was bent at 45 degrees right above the recycler it would be easier to use. With either the Air or Nano on the bottom it's too long, but not by much. The draw is fairly smooth, and even filled beyond the safe point you aren't getting water into your mouth as far as I can tell. To send water back through and down to the bowl connector you have to either blow pretty hard or basically turn it on its side, at which point it comes out the top and bottom. Overall I rate it 7,842 on my scale of meaningless numbers that end in 42. So...fun for less then $30 but not a daily driver.
@Cannabis Connoisseur it is 18mm
http://m.dhgate.com/product/nectar-collector-kit-glass-bong-bubbler-glass/255757677.html
MGG
Well-Known Member
@ragnorokk these are both resting on my desk and as you can see it is substantially bigger. It's really a nice piece that functions well, but to me it loses the hydrotube smallness factor. If the tube was bent at 45 degrees right above the recycler it would be easier to use. With either the Air or Nano on the bottom it's too long, but not by much. The draw is fairly smooth, and even filled beyond the safe point you aren't getting water into your mouth as far as I can tell. To send water back through and down to the bowl connector you have to either blow pretty hard or basically turn it on its side, at which point it comes out the top and bottom. Overall I rate it 7,842 on my scale of meaningless numbers that end in 42. So...fun for less then $30 but not a daily driver.
@Cannabis Connoisseur it is 18mm
http://m.dhgate.com/product/nectar-collector-kit-glass-bong-bubbler-glass/255757677.html
Funny, it looks like it functions better than the official recycler hydratube.
gaseous_clay
Well-Known Member
mikeben
Well-Known Member
I got my Grace Glass Vapor Bubbler today. http://www.grasscity.com/us_en/grac...e-showerhead-diffuser-white.html#.VjGARpVdHmR. This is what it looks like except the logo is in white on mine, It is only 8 inch but it's exactly what I wanted. No muss no fuss, I held my GG in one hand and my steadied my inverted Haze in the other. First experience with glass and vapor ever and I am impressed! It drew out my session by maybe 15-20 min and the flavor was beautiful.
One question, how often do you have to clean glass when you only vapor with it?
Looking forward to trying this out with some of my Ed's TNT equipment once it comes in.
One question, how often do you have to clean glass when you only vapor with it?
Looking forward to trying this out with some of my Ed's TNT equipment once it comes in.
dabsonthemountain
Well-Known Member
Clean your glass as often as you can. Every day is best, at least once a week though. I clean every 2-3 days but change the water twice a day. I'm just dabbing though, with vapes you can probably go longer. Just use it until there is an obvious coating inside, or when you can taste the claim while dry hitting it. That's when it's messing with the taste of your concentrate or flower anyway, so get it out of there.
Oh, and when it comes to saving the claim for edibles, reuse the same alcohol for awhile. Until it's saturated enough it can't even clean any more glass.
Last edited:
mikeben
Well-Known Member
Well I won't be using it except with a Haze or an Underdog. I don't combust. I use dry herb about two sessions a day and a concentrate (hash, a dab, kief, etc.) once.
FavorVapor
New Member
This looks like a really nice 7/13 clone. Any opinons out there?
http://www.dhgate.com/product/good-...m-tree-perc/254559008.html#s1-22-1b|493099694
http://www.dhgate.com/product/good-...m-tree-perc/254559008.html#s1-22-1b|493099694
Last edited:
Dangus
Yeah, well, that's just, like, your opinion, man.
Cannabis Connoisseur
I LOVE LIFE
LMFAO! You sure know how to find them!
EDIT: I can't believe it's 30% off! Looks like an accident on wheels. Also its funny as hell how most of those holes aren't even being used for diffusion. The water flow directly passes most of them
Last edited:
MisterChew
BC Bud Baby!
Hi
Looking for a compact inexpensive high quality rig for dabbing. Any suggestions?
I am completely new to this. if you can, please list all the parts that I need. Thank you!
Looking for a compact inexpensive high quality rig for dabbing. Any suggestions?
I am completely new to this. if you can, please list all the parts that I need. Thank you!
weenstoned
Well-Known Member
@MisterChew http://www.dhgate.com/store/product/2015-new-glass-smoking-bongs-based-water/216674730.html
http://www.dhgate.com/store/product/3mm-thick-male-14mm-quartz-banger-nail-90/234901154.html
Make sure you select 14mm female for the nail. Then you just need a torch. Then google low temperature dabbing (best way imo is to just use a timer or timer app) and q-tip tech (basically just wiping out excess oil with a dry qtip at the end of the dab to prevent your nail from getting dirty).
http://www.dhgate.com/store/product/3mm-thick-male-14mm-quartz-banger-nail-90/234901154.html
Make sure you select 14mm female for the nail. Then you just need a torch. Then google low temperature dabbing (best way imo is to just use a timer or timer app) and q-tip tech (basically just wiping out excess oil with a dry qtip at the end of the dab to prevent your nail from getting dirty).
mikeben
Well-Known Member
Female 14mm broke from two days of use just from normal heat. Upgrading a not so cheap bubbler.. http://dankstop.com/glass-bubblers/grav-labs-showerhead-perc-bubbler-with-detachable-helix-mouthpiece/. My Haze and Underdog will like this MUCH better I think
subway13029
Well-Known Member
How did it break trom heat??