• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Titan(?!) VS3 Vaporizer

Zoryon

Onironaut
It does help... i just guess that secretaly i waned the xmax v2 pro to be the best.

The SV3 is super cheap, even in europe. Does it consume your hebs to quickly? Is the SV3 convection? How many puffs do you get from a SV3 chamber?

The iv-1 here is almost double the SV3, but coming with water tool and having the adjust temps must be very good as well. Never had a variable temp vape before.

(sorry about the questioning, )
 
Zoryon,

MadDawg

Well-Known Member
It does help... i just guess that secretaly i waned the xmax v2 pro to be the best.

The SV3 is super cheap, even in europe. Does it consume your hebs to quickly? Is the SV3 convection? How many puffs do you get from a SV3 chamber?

The iv-1 here is almost double the SV3, but coming with water tool and having the adjust temps must be very good as well. Never had a variable temp vape before.

(sorry about the questioning, )

I would say if you can afford both... A vs3 as well as an iv-1 get both of them. The vs3 is a great put in your pocket and go Vape. The taste is great for such a small device. It's also very easy to clean. I would say the only negative with the vs3 is that you have to get used to the draw resistance. Since the wholes at the bottom of the oven are so tiny sometime I have to let it heat up a bit before the draws get easier. I just have to keep it cleaner since I use it so much. This little thing really puffs though!
 

livewithkindness123

Well-Known Member
I pack the bowl very tight then run a toothpick down the area in front of the holes and I get 3 5 min sessions on med heat . The xmax 2 pro is a good vape but I have tried everything from boiling to soaking in mouth wash and that rubber taste from the mouth piece never goes away . I do use it every now and then not in rotation but for waxes. I have a hard time which I really like better between the iv-1 and vs3 I think they are both awesome but taste wise the vs3 wins .
 
I'm very interested in the vs3 and ecapple as potential candidates for my on the go stealth type units. The imag+ was also suggested, I see a few of you guys own the is1 and vs3 do any of you guys own or have experience with the imag as well? If so how do they stack up?

I'm looking for something that heats up pretty quickly and is cheap since confiscation out and about is a real possibility. Chinese vapes seem to have come a LONNG way since the titan1!
 

galejda

Well-Known Member
Today I received my vs3 and I'm impressed for money 37$ from Aliex. its awesome device working very well.Just simply clever ,good for cleanig easy disassembly,3 temp settings thats exactly what I want from pocket device.I don't need fancy display and full temp settings it's good just for big home vape.Very good vape taste (ceramic and glass is right choice) solid clouds - apsolutely recomended !
 

zorn

Active Member
Hello Girlz and Boyz,

yesterday i recieved my VS3. Nice! Thx Aliexpress.





Yesterday evening i startet the unit after some burn off cycles, to get rid of the light plastic smell. the airpath is perfect, but the plastic around the chamber gets hot and starts to smell a bit, and then you suck it throught the chamber in the glass pathway... Thats sh*t, but well its only a very light plastic taste/smell and i am sure it will go away.


In some reviews i have read that people can produce nice clouds with this unit. I tested it with about 0,1g Jack Herrer, fine grinded. To prevent clogging of the holes, i put a metal screen in it before.

I did not pack it, i just filled it in.


I was not able to get any visible vapour out of it, only with the highest temp.setting i got some clouds (of course, with 440° F there should be visible vapour i guess ^^)

With my Flowermate mini i get much more clouds with similar settings, even with the first setting of the FM Mini (385 i guess)....so i wanted to ask you how do you pack your VS3 best?

What are your experiences, how to get the most vapour out of it?



I was a little bit dissapointed, but i am quite sure i will learn how to fly this UFO right!

Does anyone know if the bottom of the chamber is also heated, or only the walls?

Maybe the metal screen in the bottom (its not flat on the bottom, the screen has an "U" shape) keeps away too much heat from the bottom...?



Thx for your answers!
 
Last edited:
zorn,
  • Like
Reactions: Pher

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah screen could be an issue, but also most session conduction needs to be packed down tight, not loose, that's how it was when I used it and worked fine cloud wise, but also used like 3 times as much... It's no efficiency king but neither is the flowermate... This tastes much better and the design is nicer too
 

zorn

Active Member
Yeah screen could be an issue, but also most session conduction needs to be packed down tight, not loose, that's how it was when I used it and worked fine cloud wise, but also used like 3 times as much... It's no efficiency king but neither is the flowermate... This tastes much better and the design is nicer too

thank you very much!

3 times as much... weed for the same result as in other vapes, or what do you mean? Is there a big difference in vaping for example 0,3g Weed in the VS3 to vaping the same amount in another vape? Should me get high on the same level, i guess....? Even when its maybe takes longer?

And with "this tastes better and design is nicer": do you mean the FM mini or this UFO? :D

Edit: btw you have the best name here on this board, i guess :lol:
 
zorn,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
thank you very much!

3 times as much... weed for the same result as in other vapes, or what do you mean? Is there a big difference in vaping for example 0,3g Weed in the VS3 to vaping the same amount in another vape? Should me get high on the same level, i guess....? Even when its maybe takes longer?

And with "this tastes better and design is nicer": do you mean the FM mini or this UFO? :D

Edit: btw you have the best name here on this board, i guess :lol:

Haha thanks dude

Yeah I mean FM mouthpiece system is terrible, I don't like the oven opening on top bc it unpacks the herb as you draw, and the restriction is intense. Haven't tried the Mini yet, don't know if it has an isolated airpath without Kaptan tape unlike the regular size FMs...

And yeah as far as load, it is just like the FM in how it vapes, just a ceramic tube oven, but better imo bc hole is towards the bottom and you only load from the top, so it can stay packed. I'd expect it to do better with less than the FM (unless FM had a spacer), just need to pack with session conduction so it all cooks together evenly.

As far as other vapes, I am using high powered pure convection on demand units, so they ofcourse get you much higher with much less (and better taste too), everytime.
 
Shit Snacks,
  • Like
Reactions: zorn

smutman

SmutmanMDCXX
I just received the Tao Vapor Curv version of this vape. It was only $69 and has a 10 year warranty so I thought what the heck. So far it's decent, nothing seems to reach out and make me take notice vape wise. Decent taste, easy to use, low maintenance and feels decently sturdy. Now for the $249 or $269 they want for this, heck no this vape ain't worth it. This will probably end up in the vape graveyard quickly as I got way too many that are better.
 
smutman,

zorn

Active Member
Haha thanks dude

Yeah I mean FM mouthpiece system is terrible, I don't like the oven opening on top bc it unpacks the herb as you draw, and the restriction is intense. Haven't tried the Mini yet, don't know if it has an isolated airpath without Kaptan tape unlike the regular size FMs...

And yeah as far as load, it is just like the FM in how it vapes, just a ceramic tube oven, but better imo bc hole is towards the bottom and you only load from the top, so it can stay packed. I'd expect it to do better with less than the FM (unless FM had a spacer), just need to pack with session conduction so it all cooks together evenly.

As far as other vapes, I am using high powered pure convection on demand units, so they ofcourse get you much higher with much less (and better taste too), everytime.

Yes, the mini tastes pure and has a isolated air path.

And sure, i was really wrong about the amount needed.
As i remember, i need less weed with the Mini than with my Iolite or the Titan 2...

I have never tried a upper class vape, maybe with such a unit the difference would be more recognizable.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
@Shit Snacks
I forgot to ask:

You told me you need 3 times as much weed with the VS3.
Compared to what unit?

Thx!

Mainly Zion and Milaana, my daily drivers, but really almost any pure convection vape is like this in my experience, far more efficient, and for me and my useage (+friends) more effective
 
Shit Snacks,
Top Bottom