Dynavap VapCap

bounce5

bounce5

Well-Known Member
I thought of more reasons why I like VapPac. I like that the word pac (pack) is descriptive of what it is and does. You pack away your vape, you pack in the herb, you pack the herb into the vape. I like that it's a bit more discreet than DynaDug or VapStash since it sounds a bit like backpack.
 
Last edited:
NinjaMindTriks

NinjaMindTriks

Ninja Vapor Enthusiast
bounce5 said:
DynaDug?....You mean the VapPac....
Click to expand...
Nope, mine will definetly be called the DynaDug. Vap in VapPac seems like it could be for any vape. I also am stuck on the dug for dugout since it reminds me of my youth and always having a loaded dugout. Good times!
 
NinjaMindTriks,
bounce5

bounce5

Well-Known Member
I just googled Dynadug and saw that it's being used as the name for a poker review site. Don't know if that means it's taken.
 
Last edited:
bounce5,
VapCap

VapCap

Well-Known Member
Manufacturer
NinjaMindTriks said:
When will the total titanium DynaVap be available to order? I've been holding off to purchase that one. Will all of the varities all fit nicely in the DynaDug? I'm super pumped for this vape!
Click to expand...
bounce5 said:
@VapCap Adding to @NinjaMindTriks question about when will the all titanium Vapcap will be available would also like to know how much will cost? If you have any idea yet.
Click to expand...

The Ti units are about to enter their beta test phase. I hope to get more machining on them done this week. So if all goes well I will be able to complete a small number of the first generation TiVaps. These beauties will be almost completely Titanium except for a few orings, and the cap.
The machining time is also important for the TiWoodies, as they will need their Ti tips made too.

This week is also a more intense prep week. I'm trying to get more of the pre-orders as close to ready as possibly so I can focus on cap fabrication. Wow there is a lot to do! I love it!

I had a few thoughts on the dugouts too please give feedback.

paCpaV, pac&vap / VapNpac or Dynastash.

Cheers,

George
 
NinjaMindTriks

NinjaMindTriks

Ninja Vapor Enthusiast
bounce5 said:
I just googled Dynadug and saw that it's being used as the name for a poker review site. Don't know if that means it's taken.
Click to expand...
DynaDug is not a website. It looks like a players handle on full tilt poker that has won like $490. Don't think it would be a problem!
 
VegNVape

VegNVape

Increase the Peace
Company Rep
DynaVap, PyroVap, VapCap . . .

Lot's of V's there so I'm thinking 'vBay' or the 'V-Bay'.

My VapCap'll be sitting on the dock of the bay . . . . wasting time.


:D


MuchLove!
:peace:
 
bounce5

bounce5

Well-Known Member
VapCap said:
Grand Re-Opening!

Hey everybody. The inspection seed to go well. Here is my spread of product I had to show. He ended up with a DynaVap T-shirt too.

IMG_20151015_103711405_zpslo7a1p9e.jpg


So, after an unreasonably long time it looks like I am finally going to be able to reopen my store. As of the time of this post my store is back up and open for pre-orders! WOW It is a huge relief to finally have a way to take orders again. It is amazing to me how difficult it has been so far to sell these units.

Even better, I just received an update (Like 10 minutes ago) from my manufacturer as well, and it looks like they are expecting the newly heat treated punches back from the heat treating company next week and will be putting the final grind on them. So if all goes well they will be installed in the press next week and I could be receiving my anxiously awaited first shipment of caps before the end of the month. I hope to have a big share of the pre-orders fabricated before then, so all I will need to do is just finish the caps and ship them out.

For the woodies I think I will have two varieties of wood to begin with. Cocobolo and Blackwood. I will get some fresh pictures up soon to show the difference. Both are awesome, with a nice feel and simplicity that should make you smile.

Thank you everyone for hanging in there with me.

Cheers,

George
Click to expand...


@VapCap
Would love to see a closeup picture of a blackwood Woody Vapcap put together with the titanium tip (preferably rainbow) and cap. I noticed the blackwood stem in the picture of your spread...


Thought of another name for the dugout: CapPac. And it's also a palindrome.
 
Last edited:
natural farmer

natural farmer

Well-Known Member
VapCap said:
The Ti units are about to enter their beta test phase. I hope to get more machining on them done this week. So if all goes well I will be able to complete a small number of the first generation TiVaps. These beauties will be almost completely Titanium except for a few orings, and the cap.
The machining time is also important for the TiWoodies, as they will need their Ti tips made too.

This week is also a more intense prep week. I'm trying to get more of the pre-orders as close to ready as possibly so I can focus on cap fabrication. Wow there is a lot to do! I love it!

I had a few thoughts on the dugouts too please give feedback.

paCpaV, pac&vap / VapNpac or Dynastash.

Cheers,

George
Click to expand...

Hey George! Glad you are making progress with the full Ti VapCaps! Any hint on the price?

And really, VapCap or DynaDug just sound better… :p
 
hweezi

hweezi

formally cwheezy
Yeah, VapPac seems like the winner in my mind. Nothing else is rolling of the tongue as nicely as that or maybe DynaDug but I feel like that doesn't get both products out well enough.

Just hearing VapPac would be enough to catch my attention, DynaDug could go right over peoples heads, whenever these get to head-shops that is.

bounce5 said:
@VapCap
Would love to see a closeup picture of a blackwood Woody Vapcap put together with the titanium tip (preferably rainbow) and cap. I noticed the blackwood stem in the picture of your spread...


Thought of another name for the dugout: CapPac. And it's also a palindrome.
Click to expand...

More like, Cap A Man A Plan A Canal, Panama Pac! :haw:

CUE THE MUSIC!


Greatest band to break up :cry: (imo)
 
IAmKrazy2

IAmKrazy2

Darth Vapor
VapCap said:
The Ti units are about to enter their beta test phase. I hope to get more machining on them done this week. So if all goes well I will be able to complete a small number of the first generation TiVaps. These beauties will be almost completely Titanium except for a few orings, and the cap.
The machining time is also important for the TiWoodies, as they will need their Ti tips made too.

This week is also a more intense prep week. I'm trying to get more of the pre-orders as close to ready as possibly so I can focus on cap fabrication. Wow there is a lot to do! I love it!

I had a few thoughts on the dugouts too please give feedback.

paCpaV, pac&vap / VapNpac or Dynastash.

Cheers,

George
Click to expand...

Awesome. Excited and drooling over TI units. Would make it one of the most durable vapes on the market. Drop it, land or water, no problem. Just might need a new heat source as the lighter would be the most vulnerable part
 
Last edited:
Midnight Toker

Midnight Toker

That is not a drug, it’s a plant.....
Because the spirit of the Rainbow VapCap MUST be kept alive, I feel obligated to state again that I am still in love with this experiment and want it to be my second vapcap, more than the all Ti.
It is beautiful! :love:

@VapCap congrats on getting your store back up and running. If you aren't going to mass produce the rainbow VC, please think about allowing me to add to my existing order and purchase the one in the picture below. :bowdown::wave::bowdown:

IMG_20150820_161708897_zpswt3gqh1y.jpg
 
Enchantre

Enchantre

Oil Painter
Midnight Toker said:
Because the spirit of the Rainbow VapCap MUST be kept alive, I feel obligated to state again that I am still in love with this experiment and want it to be my second vapcap, more than the all Ti.
It is beautiful! :love:

@VapCap congrats on getting your store back up and running. If you aren't going to mass produce the rainbow VC, please think about allowing me to add to my existing order and purchase the one in the picture below. :bowdown::wave::bowdown:

IMG_20150820_161708897_zpswt3gqh1y.jpg
Click to expand...
I want that. Wow.

That would match my hubby. Perfect accessorization!
 
VapCap

VapCap

Well-Known Member
Manufacturer
Greetings everyone!

Here is a picture of the Blackwood TiWoody as requested.

IMG_20151021_193736611_zpsqfdyz3dn.jpg


And another.

IMG_20151021_193754947_zpsasgntpub.jpg


I am experimenting with a non-glass condenser tube for these too. I think the first generation condensers will be stainless steel. Total weight for these units with the condensers is a whopping 8 grams.

Please share your thoughts!

Cheers!

George
 
Last edited:
bounce5

bounce5

Well-Known Member
Vapcap looks like he's wearing a tuxedo. Looks like a vape to pull out at a fine wedding or to drink with some scotch...:) I like the way that blackwood shines. I want mine with rainbow titanium though so it'll look more business in front and party in the back :rockon:. and I liked the look of the titanium piece with three rings vs six rings also. But either way, i'm sure it would grow on me.
 
vaporonly

vaporonly

living in a van down by the river
VapCap said:
Greetings everyone!

Here is a picture of the Blackwood TiWoody as requested.

IMG_20151021_193736611_zpsqfdyz3dn.jpg


And another.

IMG_20151021_193754947_zpsasgntpub.jpg


I am experimenting with a non-glass condenser tubes for these too. I think the first generation condensers will be stainless steel. Total weight for these units with the condensers is a whopping 8 grams.

Please share your thoughts!

Cheers!

George
Click to expand...

now that is some vape porn right there! :argh:

good idea on the non-glass tubes.

Seriously impressive work
 
shark sandwich

shark sandwich

"shit sandwich"
Accessory Maker
That Blackwood model looks great!

I like the look of the new Ti tip, and the weight sounds good to me- 8 grams should be just enough heft for it to feel substantial in the hand.

I like stainless for the condenser because it's inert and unbreakable. Ti is always nice, but it's definitely not necessary for the condenser tube.

When might these start shipping? It sounds like they may take a little longer than the glass model.
 
VapCap

VapCap

Well-Known Member
Manufacturer
shark sandwich said:
That Blackwood model looks great!

I like the look of the new Ti tip, and the weight sounds good to me- 8 grams should be just enough heft for it to feel substantial in the hand.

I like stainless for the condenser because it's inert and unbreakable. Ti is always nice, but it's definitely not necessary for the condenser tube.

When might these start shipping? It sounds like they may take a little longer than the glass model.
Click to expand...

If all goes well, the woodies are projected to begin shipping near the end of November/ beginning of December.
 
natural farmer

natural farmer

Well-Known Member
VapCap said:
Greetings everyone!

Here is a picture of the Blackwood TiWoody as requested.

IMG_20151021_193736611_zpsqfdyz3dn.jpg


And another.

IMG_20151021_193754947_zpsasgntpub.jpg


I am experimenting with a non-glass condenser tube for these too. I think the first generation condensers will be stainless steel. Total weight for these units with the condensers is a whopping 8 grams.

Please share your thoughts!

Cheers!

George
Click to expand...
:drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool:

And I love the new Ti tip vs the 3-ribbed one!!!! :love::love::love::love::love::love::love::love::love::love::love::love:

Good one George!!!! :nod::clap::tup::rockon::bowdown::D
 
You must log in or register to reply here.
Top Bottom