elastic.plastic
Looking for interesting people and vapes
Try this.. Sandwich pack in the elbow. first layer fairly grounded herb, then hash, then herb... press a little
=)
=)
elastic.plastic
Looking for interesting people and vapes
Ok, do you have some mesh around? put it in there and try to put this in the elbow mesh.
Have a second elbow mesh? put them together withh the hash inside
Have a second elbow mesh? put them together withh the hash inside
ataxian
PALE BLUE DOT
I have a few wax/SHATTER/HASH pens however I love to use a vaporizer with HASH!
I take clean cotton like from a vitamin bottle (small piece) and wrap it up and drop her in!
Dr. Soxhlet
SOLO Vaporized Cannabis is my Best Medicine
I always use the SSV wand that way, but I don't install a screen in the Ddave adapter. I usually use it at 464F, which is a fair amount higher than the 410F I used with the Mini Wand setup last night. The inner screen does tend to clog this way, but the "basket screen" stays clean.
Justpassedu
Well-Known Member
I actually just ran into a buddy that gave me some hash. It is dark brown. I am not sure if it is bubble or black hash. It is kind of sticky and not the hard type and does not crumble but i can rip off small pieces by hand. I tried some in my arizer air last night and made a bud sandwich with it. It worked ok but i like to have the hash straight and have been a bit scared to just drop it in my Eq. I also tried putting it in a glass globe i use for wax and it did not really melt well like wax would. Is it safe to drop some in the Eqs elbow ? I am unsure of how well it work , seems like it needs a high heat to get it started.
ataxian
PALE BLUE DOT
I love HASH!
I will get a 1/4 OZ
56% THC
I have mesh however I find cotton to work fine!!!
elastic.plastic
Looking for interesting people and vapes
ataxian
PALE BLUE DOT
I just at a.pitch of GOD'S GIFT and pre~heated and OMG:
Definitely my driver with 18mm set up with a Dave kit and a thick California made Water pipe!
Why vAporizers came out so late?
This GOD's GIFT is way over medicating!
absoludicrous
Well-Known Member
I've been going low at 170c with the ddave 18mm wand and cyclone bowl packing. I find it very tasty but a little messy with all the flowers flying around. Started to wand pack the 18mm and go to 175c. Wow, this session has been going on for what seems to be too long. I have to wake up early tomorrow but it won't end. there are still some good clouds coming out. Amazing, I think I found a winner. It's easier to clean too!
kellya86
Herb gardener...
@elastic.plastic, I did look into rosin but seemed too much hassle. Having to buy straighteners and stuff. My iso extracted hash came out lovely. Looked like glassy amber. Then as you pull off its like caramel. Anyway I vaped it last night in a sandwich and it kept me high for 4 hours. Will be making more of that.
TomC1315
Well-Known Member
all-glass-mini-whip-set.jpg
Has anyone tried this all glass mini whip set by Arizer for filling bags?
I'm trying to improve upon the stock set up ... I received my DDave adapter to replace the cyclone bowl yesterday (3 days before delivery estimate :-)
I'm also considering the Silver Surfer elbow ... would this elbow fit the existing Arizer tubing?
Thanks :-)
Has anyone tried this all glass mini whip set by Arizer for filling bags?
I'm trying to improve upon the stock set up ... I received my DDave adapter to replace the cyclone bowl yesterday (3 days before delivery estimate :-)
I'm also considering the Silver Surfer elbow ... would this elbow fit the existing Arizer tubing?
Thanks :-)
Dr. Soxhlet
SOLO Vaporized Cannabis is my Best Medicine
Yeah. I'm 66, been using the herb since I was 18. Vaping now for over five years(thanks EQ & Solo).
Vaping was like going through a time warp!! And I've saved a S**T load of money on lighters!
Yes it does. I believe everyone that has an EQ; from the lightweights to the heavy hitters can benefit from these Ddave mods. There are many possible configurations possible with the parts supplied.
Last edited:
TomC1315
Well-Known Member
1. Consistency ... each hit off the bag is essentially the same - uniform ... if anything, the last two hits tend to be a little fuller and tastier.
2. Efficiency (maybe?) ... an amount that might yeild four really good hits with my Arizer Air, will give me upwards of a dozen nice (although a little wispy) hits - and the same buzz.
Just my guestimation, but our lungs can only absorb so much of whatever (in our case - cannabinoids) ... therefore, I wonder how efficient those huge rips we've seen in the vids are.
Anyway, in my experience, even though the bag usually doesn't look very cloudy when given a small amount of material to work with, each exhale produces plenty of visible vapor.
3. Portability around the house ... fill it in one room, then take it with you wherever.
I timed my fill up on fan speed 1 the other day ... 3 1/2 minutes. Considering that drying/grinding and pre-heating take considerably more time than that (and my Air takes 2 to 3 min.) ... I always choose the bag method over the Air unless I'm away from home, or need to keep things on the DL
4. Almost impossible to take too big of a hit
ataxian
PALE BLUE DOT
I did not start cannabis until 1970!
However vaporizing is very civilised and the taste is outstanding.
I need.to.try a bag and.see.if I'm missing something?
Economy of CANNABIS is kind of lame.
fubar
Ancient and opiniated inhaler
That probably makes more sense if you live where it's legal and cheap. OTOH, there is a good argument that we all owe the planet a debt which we can only begin to repay by minimising waste wherever we can. Having lived in the US for 13 years, I appreciate that for many modern Americans this might seem like a strange idea. Living in Australia where possession is an indictable offence, I'm at substantial risk whenever I make a purchase, so conservation of bud is an imperative to minimise exposure to potential harms.
Last edited:
ataxian
PALE BLUE DOT
@fubar you know I'm joking and do understand your fate.
When I lived in Hawaii it was free.
my friends from south Africa had bag fulls of DURBAN POISON & friend's from MAUI would bring us WOWIE.
On the NORTH SHORE we grew HUMBOLDT PURPLE MOUNTAIN and it was free.
We smoked joints when we'd woke up until we went to sleep after surfing all day!
I don't drink soda and have a strick diet!
My mates from OZ out drank us!
We liked cannabis better!
Sorry to rambel!
I just wished Ì had a Q during the decade of bliss!
fubar
Ancient and opiniated inhaler
Interesting - you lucky fellow - and no, I'm not blaming you personally for the great pacific garbage patch because of your jest about conservation.
After all, one thing I learned during my stay was that there is a vast range of attitudes and behaviour with regard to unnecessary waste of natural resources in the US - like there is here on a much smaller scale....
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
Just got some Vape bags from puffit.com with the FC discount. My new bag making method.
8 inched stock PVC hose, 2 inch silicone tubing, 1 vape bag
Cut about 8 inches of PVC whip hose. Have 7 inches slipped into the hole inside of the center of the bag. Yes you do want the hose inside the bag with an inch of tubing outside the bag. A two inch silicone tube will go on the outside of the bag covering the fold. The one inch of pvc 'plug' sticking out of the bag can be inserted directly into say a hose coming from the EQ.
Another option, you can find that small stock glass piece meant for an attachment for the PVC whip hose and insert that in the plug.
Now for the bag. Then accordion fold each half of the opening section of the bag that needs to be overlapped.
Keeping in mind these two flaps will be overlapped tightly toghether and then have a tube of hose slid over all that.
So after you have overlaped them and slipped a 2 inch piece of silicone over the pvc plug and roll it over the business end of the bag that needs to be covered. the bag is finished.
Then attach the plug end to an open whip hose. Since 7 inches of tubing is already inside the vape bag. Less problems with filling that bag in any position.
8 inched stock PVC hose, 2 inch silicone tubing, 1 vape bag
Cut about 8 inches of PVC whip hose. Have 7 inches slipped into the hole inside of the center of the bag. Yes you do want the hose inside the bag with an inch of tubing outside the bag. A two inch silicone tube will go on the outside of the bag covering the fold. The one inch of pvc 'plug' sticking out of the bag can be inserted directly into say a hose coming from the EQ.
Another option, you can find that small stock glass piece meant for an attachment for the PVC whip hose and insert that in the plug.
Now for the bag. Then accordion fold each half of the opening section of the bag that needs to be overlapped.
Keeping in mind these two flaps will be overlapped tightly toghether and then have a tube of hose slid over all that.So after you have overlaped them and slipped a 2 inch piece of silicone over the pvc plug and roll it over the business end of the bag that needs to be covered. the bag is finished.
Then attach the plug end to an open whip hose. Since 7 inches of tubing is already inside the vape bag. Less problems with filling that bag in any position.
VapeHeadz
Well-Known Member
I've had my EQ for over 5 years and have never used the bags either. lol, maybe I should try one sometime.
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
Agree with @TomC1315 points. I do try to get a more of a consistent 'gaseous' vapor when filling bags (and also trying to get that knack back
). With all the parts I have and using @DDaves's method for keeping the hose in shape with the tube clamp. (Only I zip tied a loop to the handle of my tube clamps and formed a wider arc with the hose.) Then I mentioned in my last post how I came up with a new method for making balloon bags. It's essentially using an 8 inch piece of PVC tube inside a vape bag for support and inch at the end as the plug-in. Using a 2 inch piece of silicone tubing around the outside of the bag instead of pesky o-rings, rubber bands ,etc. Just roll up the 2 inch tube up over the bag opening that already been wrapped around the PVC hose.
Pretty much my homemade PVC bag method with the tamed arch and better grade of bags and the hose that came with the DDave kit.
Made it a full upgrade categorically
The 18mm glass wand and tip hat that came with the DDave kit. And my own special F/F for the EQ. So no telescoping of vapor until it reaches the PVC portion of my vape bag. Where it is needed. IMHO. There is enough PVC hose already 1/3 of the way inside the bag. So very little dissipation. The vape bag expands nicely even while laying on it's side. The PVC tube inside the bag does all the work. So, Fast fill-up time and emptying time too.
Do like the 'VapeBags' brand of bags from Puffitup.com so far. Cheapest place anywhere with the FC discount.
The 'Vapebags' bags are tapered more that the stock EQ bags. Thicker and clearer to. Better at filling up with that extra edge around the bag.
But found my main source. Been happy with their delivery before too.
If I get good with filling bags, I look into modding a 5ft Volcano bag. Otherwise going with these.
Last edited:
ataxian
PALE BLUE DOT
Thank yOu!Agree with @TomC1315 points. I do try to get a more of a consistent 'gaseous' vapor when filling bags (and also trying to get that knack back
It's essentially using an 8 inch piece of PVC tube inside a vape bag for support and inch at the end as the plug-in. Using a 2 inch piece of silicone tubing around the outside of the bag instead of pesky o-rings, rubber bands ,etc. Just roll up the 2 inch tube up over the bag opening that already been wrapped around the PVC hose.
Pretty much my homemade PVC bag method with the tamed arch and better grade of bags and the hose that came with the DDave kit.
Made it a full upgrade categorically
The 18mm glass wand and tip hat that came with the DDave kit. And my own special F/F for the EQ. So no telescoping of vapor until it reaches the PVC portion of my vape bag. Where it is needed. IMHO. There is enough PVC hose already 1/3 of the way inside the bag. So very little dissipation. The vape bag expands nicely even while laying on it's side. The PVC tube inside the bag does all the work. So, Fast fill-up time and emptying time too.
Do like the 'VapeBags' brand of bags from Puffitup.com so far. Cheapest place anywhere with the FC discount.
The 'Vapebags' bags are tapered more that the stock EQ bags. Thicker and clearer to. Better at filling up with that extra edge around the bag.
But found my main source. Been happy with their delivery before too.
If I get good with filling bags, I look into modding a 5ft Volcano bag. Otherwise going with these.
The 14mm setup is amazing!