The Mighty/Mighty+ by Storz & Bickel

uhranium

Well-Known Member
Hey mightiers, here's a method of consuming I adapted the last weeks.

First I was out of weed and out of money, so what to do?
oil scraping. After 1-2 days without vaping I'd look into the Cooling Unit and found enough goo to collect and feed my evening cravings.
1st day getting effects without money completed.
On the 2nd day I was like "meh I have the brownest ABV here, let's try it" so I filled the whole bowl with super brown ultra fine ABV and got like 2-3 clouds, but hey it was enough because my tolerance already got down. 2nd day completed.
3rd day I opted for the oil again, since the ABV should have left at least a tiny part of oil particles. And it did. 3rd day completed.
Now the 4th day was tricky, no more ABV - but hey, maybe the oil from day 3 left some oil particles? Again?? Oh yeah. 4th day completed.
And I managed to continue to re-re-re-re-re-vape q-tip cotton oil until the tenth day, when I finally bought another 2grams.

Now I knew my tolerance might have gotten way down, so I started with a small amount of weed. Maybe like 0,05g. Boy was I above everything.

Which led me to the next sick thing. I ripped the two little buds apart, just in so small pieces, you would be happy if you found them on your table after not having vaped for days while being broke. Then I put ever crumble into its own ziploc. Ended up making 67 tiny bags with about ~0.03g of weed in it.

In the end, all I need now is 1 tiny bag of weed for a session (~2 hours) which might cover the whole day (if you vape in the evening, not troughout the day). If I want to get a bit more hammered, I wait 5 minutes after killing my first 0.03g to let the effects be working.

Now lately I am wondering how I was able to vape 1g a day, and how I am sitting with my mighty for like 10 minutes and not getting higher then I get today. Tolerance it is!

vaping definitely shoots your tolerance way up and a lot of mighty users in here complain about how they got so fuxed on the first day, but not on the second. You overdid it, bros. (sry for medical users, you need to vape until the pain goes away etc, hard to manage tolerance with it)

I'm in the lwien style for now. paying 30-90cent a day for vaping where "standard hardcore stoners" smoke up 30-40€ a day seems so fucking unreal.

Anyways, my 2nd mighty (SN 149xx) has all top fins broke on both sides and the wall charger is broken too so I really need to get a new one before my batteries go south.

Keep it on!
 

Stinky

Well-Known Member
holy cow - if anybody is feeling decreased vapor production in their mighty, please check under the CU screen the next time you clean

i cleaned my CU twice without thoroughly cleaning out that chamber between the CU and the screen and was getting frustrated that my performance wasn't improving.

finally took my CU screen out and i swear to god there was a quarter ounce of thick, sludge AVB grime. took 5 minutes to clean it all out but once i did, holy shit the clouds are BACK.
That's the little shelf I talk about all the time. Makes a huge difference.
 
Stinky,

Michel

Well-Known Member
The Postman just delivered my warranted mighty with serial around 29000. Feels good with the new housing. I thought about selling it before we separated 9 days ago, but after over a week with the pax 2 and the MV exclusively I'm very excited to fire it up again! I guess I just need one S&B portable in my life to get the trustfull job done.
The picking tool is sticking quite hard in the new housing compared to the old one. And there is a new car charger again:
23246259kp.jpg
 

dirtdragon

Well-Known Member
I stopped using a screen in the CU with great success. I cut the screen (think pacman) and wedge it on top of the material. No more buildup on the screen! Clouds are better and no more gunky screen!
 
dirtdragon,

Stinky

Well-Known Member
I stopped using a screen in the CU with great success. I cut the screen (think pacman) and wedge it on top of the material. No more buildup on the screen! Clouds are better and no more gunky screen!
I take my CU off immediately after use and don't get any build up on the screen. It also allows the plastic on the heating unit to cool down a lot faster resulting in no chipping or cracking issues for me.
 

Alan Partridge

Smell my cheese
Damn, it's sad to see so many issues on this thread. I've got no complaints about the service in Europe. I sent mine in after 6-7 months of daily, heavy abuse because the charger broke, otherwise I reckon I'd have the same mighty from November last year. Batteries were absolutely fine in the old one I had.
 

vts

Well-Known Member
Just ordered the Mighty from Puffitup because my Crafty is in for repair. I'm hoping for better results from the Mighty, but after reading how this thread is going, it looks like same problems as the Crafty. So glad I got a Daisy for home use.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Happy Monday!

Well, it took about 20 different iterations, but I'm happy to announce that I've finished my
Mighty Mini Stand


Finally, a safe way to hold your vaporizer upright while loading!

I know someone will want a bigger version with slots to hold other accessories, but I'm not quite sure what to make. If you would like to help me sketch some ideas for a larger stand, please feel free to PM me!


Additionally I'm still working on the Mighty CU-Mod SonG, it's coming along nicely. Unfortunately printing Silicone molds is a bit of a PITA currently, but I'm working as fast as I can on the Mighty accessories.

If anyone has any other requests for Mighty accessories, please PM me soon, I'm planning to return the Mighty to it's owner sometime in October and I'd like to finalize any designs before then.
 
Last edited by a moderator:

Headless1916

New Member
Hello all. Just finished reading the preceding pages, and wish I had known about this site when I began my S&B journey.

In June of this year, I decided to switch from smoking to vaping, having noticed that I was constantly experiencing sinus issues/congestion. I decided to buy an S&B vaporizor primarily due to the legendary volcano, which I had tried before and enjoyed, and also because of their extremely good reputation for customer service. At the time, all I found in some cursory searches were good things about the Mighty, so, even though I was hesitant to spend so much money on a single smoking item, I purchased a Mighty from a local shop for just under 450$; the unit serial number was in the 00353x range.

My first Mighty died within only 5 weeks - the power button stopped turning on the unit at all, and I can hear something tiny rattling around in the device that I can only assume is part of the power switch itself. Because I am an impulsize idiot, it was my only vaporizer, and I wanted to continue vaping without waiting for a replacement unit, I actually went and bought a second Mighty from the same store. And since I am lazy, I never got around to sending that first mighty back for repairs; it's still sitting here in front of me with a broken power button.

The second unit, which I purchased in early August, was in the 00355x serial # range, and it had problems from the first day - it did not heat as fast as the first unit, the screen did not update/refresh as quickly (numbers would sometimes take 2-3 seconds to fade in as they changed), and did not hold a charge for nearly as long as the first unit - I suspect that only one battery cell was connected internally from the day I purchased it. The second unit stopped working this week; it does not heat up when turned on, and after about 30 seconds displays ERR 004.

I am now one frustrated customer and extremely disbelieving too; how can a company as reputable, with such a long history with producing these devices, have released a product that consistently breaks within only a few weeks of use? I have not abused either unit, and in fact stopped using the power button to keep the vaporizor turned on when I got the second unit, instead using the +/- buttons to re-set the auto time-off feature. I've never dropped either unit, spilled anything on them, etc.

I love my Mighty when it works, obviously - or I wouldn't have just bought another, and I am really hoping that the replacement units I receive will have these issues worked out.

Both units are packed up and ready to ship back to S & B, and will be heading out tomorrow; I'll update you guys and let you know what my experience is. I just wanted to add my experiences to those of other users here - I noticed multiple other users have had multiple units die on them. Well, i'm looking at a 100% failure rate for the Mighty's here too. Just an FYI for any other future buyers.
 
Last edited:

badlt

New Member
Hello all. Just finished reading the preceding pages, and wish I had known about this site when I began my S&B journey.

In June of this year, I decided to switch from smoking to vaping, having noticed that I was constantly experiencing sinus issues/congestion. I decided to buy an S&B vaporizor primarily due to the legendary volcano, which I had tried before and enjoyed, and also because of their extremely good reputation for customer service. At the time, all I found in some cursory searches were good things about the Mighty, so, even though I was hesitant to spend so much money on a single smoking item, I purchased a Mighty from a local shop for just under 450$; the unit serial number was in the 00353x range.

My first Mighty died within only 5 weeks - the power button stopped turning on the unit at all, and I can hear something tiny rattling around in the device that I can only assume is part of the power switch itself. Because I am an impulsize idiot, it was my only vaporizer, and I wanted to continue vaping without waiting for a replacement unit, I actually went and bought a second Mighty from the same store. And since I am lazy, I never got around to sending that first mighty back for repairs; it's still sitting here in front of me with a broken power button.

The second unit, which I purchased in early August, was in the 00355x serial # range, and it had problems from the first day - it did not heat as fast as the first unit, the screen did not update/refresh as quickly (numbers would sometimes take 2-3 seconds to fade in as they changed), and did not hold a charge for nearly as long as the first unit - I suspect that only one battery cell was connected internally from the day I purchased it. The second unit stopped working this week; it does not heat up when turned on, and after about 30 seconds displays ERR 004.

I am now one frustrated customer and extremely disbelieving too; how can a company as reputable, with such a long history with producing these devices, have released a product that consistently breaks within only a few weeks of use? I have not abused either unit, and in fact stopped using the power button to keep the vaporizor turned on when I got the second unit, instead using the +/- buttons to re-set the auto time-off feature. I've never dropped either unit, spilled anything on them, etc.

I love my Mighty when it works, obviously - or I wouldn't have just bought another, and I am really hoping that the replacement units I receive will have these issues worked out.

Both units are packed up and ready to ship back to S & B, and will be heading out tomorrow; I'll update you guys and let you know what my experience is. I just wanted to add my experiences to those of other users here - I noticed multiple other users have had multiple units die on them. Well, i'm looking at a 100% failure rate for the Mighty's here too. Just an FYI for any other future buyers.
Looks like you bought 2 very early models with issues addressed by S and B in newer models.
 

Mangled Alaskan

Active Member
Happy Monday!

Well, it took about 20 different iterations, but I'm happy to announce that I've finished my
Mighty Mini Stand


Finally, a safe way to hold your vaporizer upright while loading!

I know someone will want a bigger version with slots to hold other accessories, but I'm not quite sure what to make. If you would like to help me sketch some ideas for a larger stand, please feel free to PM me!


Additionally I'm still working on the Mighty CU-Mod SonG, it's coming along nicely. Unfortunately printing Silicone molds is a bit of a PITA currently, but I'm working as fast as I can on the Mighty accessories.

If anyone has any other requests for Mighty accessories, please PM me soon, I'm planning to return the Mighty to it's owner sometime in October and I'd like to finalize any designs before then.

Please Sir, may I have one? How do I order one?
 

vapviking

Old & In the Way
Happy Monday!

Well, it took about 20 different iterations, but I'm happy to announce that I've finished my
Mighty Mini Stand


Finally, a safe way to hold your vaporizer upright while loading!

I know someone will want a bigger version with slots to hold other accessories, but I'm not quite sure what to make. If you would like to help me sketch some ideas for a larger stand, please feel free to PM me!


Additionally I'm still working on the Mighty CU-Mod SonG, it's coming along nicely. Unfortunately printing Silicone molds is a bit of a PITA currently, but I'm working as fast as I can on the Mighty accessories.

If anyone has any other requests for Mighty accessories, please PM me soon, I'm planning to return the Mighty to it's owner sometime in October and I'd like to finalize any designs before then.

Very nice looking. Great job. If I had a Mighty, I'd get one of these! (Not looking for sympathy, but I own a Crafty; #3 in 6 months).
 

Delta3DStudios

Well-Known Member
Accessory Maker
Very nice looking. Great job. If I had a Mighty, I'd get one of these! (Not looking for sympathy, but I own a Crafty; #3 in 6 months).

Thanks!

Don't you worry, the Crafty will be one of the next vaporizers I'm going to focus on! CU-Mod, Stand, etc :science:
 
Delta3DStudios,
  • Like
Reactions: h3rbalist

BioSector

Well-Known Member
Looks like you bought 2 very early models with issues addressed by S and B in newer models.

I was going to say the same thing. If the first one was sent in for repair right away it would have been replaced with a unit with improved housing and updated firmware. If those 3xxx range serials were purchased in June, they have been sitting around since October or November of last year and who know how they were treated. :(

Does suck from a user experience point of view, I'll give you that!
 

Stinky

Well-Known Member
I was going to say the same thing. If the first one was sent in for repair right away it would have been replaced with a unit with improved housing and updated firmware. If those 3xxx range serials were purchased in June, they have been sitting around since October or November of last year and who know how they were treated. :(

Does suck from a user experience point of view, I'll give you that!
I assumed that they probably returned the unit to a retailer who gave them another old unit off the shelf.

Serial numbers that low had red o-rings and problems with pass through charging.
 
Stinky,

Headless1916

New Member
I assumed that they probably returned the unit to a retailer who gave them another old unit off the shelf.

Serial numbers that low had red o-rings and problems with pass through charging.

Huh... just an FYI, both of my units have blue o-rings, and neither unit had problems with pass-through charging that I could tell (i plugged them in with batteries completely drained and they immediately heated + maintained temps)
 
Headless1916,

MichaelCompton

Well-Known Member
Soaked my mighty 's CU a couple days ago and just scraped the reclaim. Looks like pretty decent stuff , nice color. I guess the taste isn't the best ?
 
MichaelCompton,

Stinky

Well-Known Member
Stinky, I believe you're thinking of the counterfeits coming with red o-rings, not the early units.

My first unit a had red o-ring. The very early ones that didn't have pass through charging came like that.
 
Stinky,
Top Bottom