Cheap High Quality Bubbler

I was a sucker by buying 6 small pieces that are worthless!
I wanted a dab rig!
I use a bigger piece for dabs!
I bought a bunch of small pieces as well for dabs. I like the small pieces for flavorful herb hits. I have to use my huge pieces with lots of water and good diffusion for dabs. I still get awesome flavor and ass kicking effects! I'm with you @ataxian bigger pieces for dabs! I tried the small pieces choked, burnt my throat ,and chest. Just plain torture! I'm only 36 for the record
 
Last edited:

ataxian

PALE BLUE DOT
I bought a bunch of small pieces as well for dabs. I like the small pieces for flavorful herb hits. I have to use my huge pieces with lots of water and good diffusion for dabs. I still get awesome flavor and ass kicking effects! I'm with you @ataxian bigger pieces for dabs! I tried the small pieces choked, burnt my throat ,and chest. Just plain torture! I'm only 36 for the record
I set up a FC186 & a Ash catcher and a ti domeless nail
And that's how you dab!
Dabbed on tin foil in the 70's!
 

Frederick McGuire

Aggressively Loungey
I've done a few dabs out of my fc-1000 :lol:

Almost exploded my lungs from the volume of it, but it was smooth :lol:

With the exception of the FC-710, which uses some kind of voodoo magic, I generally like the medium sized pieces more for both dabs and vapes.

My position on just about every piece of glass:
If in doubt, make it a bit bigger.
(Including the FTK - id LOVE one that's like double the size of the prototype in the vid...)
 

ataxian

PALE BLUE DOT
I've done a few dabs out of my fc-1000 :lol:

Almost exploded my lungs from the volume of it, but it was smooth :lol:

With the exception of the FC-710, which uses some kind of voodoo magic, I generally like the medium sized pieces more for both dabs and vapes.

My position on just about every piece of glass:
If in doubt, make it a bit bigger.
(Including the FTK - id LOVE one that's like double the size of the prototype in the vid...)
The fc186 is the biggest I go!
My D sets work well and are a bit smaller!

I want to get more glass!

My wife tells me I have enough!
 

NorVape

Vape Rictim
I have a D020-x for dabs and a D020 for vapes. These are my first waterpipes ever, and I am very happy with them.

I bought this one because it is small, so I'm happy about that, but if I were to look for a big piece with lots of diffusion and these things, what would you guys recommend?

Something that can make a snakedab relatively smooth.
 

Vessel

Well-Known Member
Last edited:
Vessel,

Frederick McGuire

Aggressively Loungey
Is there one cheap bubbler that anyone could suggest that would pair really well with the Cloud Evo and still be decent for doing dabs?

I am thinking something that is small in volume - The D020 series have always stood out as something that might work for me.


This looks good http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html

Pieces are cheap enough that I guess I could get two different bubblers to serve different purposes.
Imo either the GB 187 from yingmin, or the FC-187 from steven fits your description perfectly.

Imo the d020 is a bit small for the evo, but it would work fine if you like the look of it :)

The 187s would just offer you a bit more diffusion and a bit more can space.
 

wolfJflywheel

Well-Known Member
I've done a few dabs out of my fc-1000 :lol:

Almost exploded my lungs from the volume of it, but it was smooth :lol:

I think I've only used my FC-1000 for dabs since I got it. It seems to be the perfect rig for my enail setup.
I've only dabbed out of another piece once since I got it, which was really just as a tribute to my old go to dab rig which hasn't been seeing any action lately.

My position on just about every piece of glass:
If in doubt, make it a bit bigger.
(Including the FTK - id LOVE one that's like double the size of the prototype in the vid...)

I'd definitely be into 2 FTK sizes like with the torus. I'd probably into it enough to get both. :brow:
 

Frederick McGuire

Aggressively Loungey
I think I've only used my FC-1000 for dabs since I got it. It seems to be the perfect rig for my enail setup.
I've only dabbed out of another piece once since I got it, which was really just as a tribute to my old go to dab rig which hasn't been seeing any action lately.



I'd definitely be into 2 FTK sizes like with the torus. I'd probably into it enough to get both. :brow:
Haha, I was doing rather large relatively low temp dabs, so it took a lot of lung power to get it all.
Plus I was using a regular torch nail...
Everything about my setup was asking for more and more lung power :lol:

I'm sure it would be pretty badass with an enail :tup:
 

tepictoton

Well-Known Member
Just ordered a faberge egg from seller gorgeous_heroine and a ball rig from seller RooR.

Went for the faberge egg offered by this seller because it seems to have a matrix perc at the buttom, and he offers free shipping to Europe.

Went for the roor seller because again he offers free shipping to Europe.

Both seem to have their own genuine pictures of the products offered and reviews are positive.

If anybody has some experience with one of these sellers please share your experience with us. I will let you all know in about one month how it all ended up, because shipping will take forever for sure:uhoh: But at those prices...one can get a lot of popcorn for the euros saved this way hihi

Edit: had the FC-Mod in my cart for a long time, but will awaith first reviews and probably will feel safer ordering it if it gets a support on the mouthpiece joint...
 

Frederick McGuire

Aggressively Loungey
@Frederick McGuire i think a survey will show a majority would probably prefer a larger FTK. I don't know who's the project manager on that piece,but it'd be great to make that change. To many mini pieces already. The FTK should be 13 inches the mouthpiece with a 18mm female :rockon: FUCK IT I'LL BUY 2 OF THOSE!!!:rockon:
OMG a 13 inch version would be fukken awesome!!!

I just know a lot of peeps here on FC (and just in general) seem to prefer smaller and smaller rigs, so I didn't want to push too hard ;)
 
OMG a 13 inch version would be fukken awesome!!!

I just know a lot of peeps here on FC (and just in general) seem to prefer smaller and smaller rigs, so I didn't want to push too hard ;)
Like I said lets do survey or a show of hands. Can we get at least 20 Sold?????


EDIT: I LOVE HOW THESE GUYS BOB IN UNISON:rockon: :rockon::rockon::rockon::rockon::rockon::rockon::rockon::rockon:
 

Errly Kyler

New Member
I'm looking for a nice mini tube in the 4-5" tall range, preferably with a 14mm joint (female ideally, but I know that's dreaming). These are the only couple I've found so far:

http://m.dhgate.com/product/new-mini-glass-pipes-circular-bong-ash-catcher/233277162.html#pd-019

I like that one, but I need to find it available as a single, not a lot of 20. And the extreme angle on the necks of some of those makes me nervous (I prefer just a slight bend).

Then there's this one:

http://m.dhgate.com/product/5-inch-mini-glass-bong-10mm-nail-mini-oil/203984565.html

Which I really like, but it's 10mm. Is there any type of 10mm domed set up that can hold a decent sized dab?

Please recommend any other mini tubes you can think of that fit the bill. Thanks!

Ps: sorry mods for the mobile links, but I was unable to get a non mobile URL on my phone.
 
Errly Kyler,

ataxian

PALE BLUE DOT
I'm no expert on glass I just have too much!
Do what feels right to you!
I use a D020 for my SOLO.

Just size the piece to fit your vaporizer!
 
Last edited:

mrupton

New Member
Any one have recommendations for an oil rig with that comes with a nail?

:mmmm:

Thanks!
 
Last edited:
mrupton,

Nugg

Well-Known Member
Then there's this one:

http://m.dhgate.com/product/5-inch-mini-glass-bong-10mm-nail-mini-oil/203984565.html

Which I really like, but it's 10mm. Is there any type of 10mm domed set up that can hold a decent sized dab?

I have this little beaker and I love it. Makes a good travel rig as well.

I use mine with a 90 degree banger because I lean the piece back when im using it. That way the slits in the stem are better covered by the water and the banger sits level.

If you are looking for a domed set up I find the flux nails work well. They have a good sized cup to hold a decent dab.
 

deltr0n

Big Daddy Oil
I'm looking for a nice mini tube in the 4-5" tall range, preferably with a 14mm joint (female ideally, but I know that's dreaming). These are the only couple I've found so far:

http://m.dhgate.com/product/new-mini-glass-pipes-circular-bong-ash-catcher/233277162.html#pd-019

I like that one, but I need to find it available as a single, not a lot of 20. And the extreme angle on the necks of some of those makes me nervous (I prefer just a slight bend).

Then there's this one:

http://m.dhgate.com/product/5-inch-mini-glass-bong-10mm-nail-mini-oil/203984565.html

Which I really like, but it's 10mm. Is there any type of 10mm domed set up that can hold a decent sized dab?

Please recommend any other mini tubes you can think of that fit the bill. Thanks!

Ps: sorry mods for the mobile links, but I was unable to get a non mobile URL on my phone.


I have a 10mm rig about the same size, and I use a 3mm Quartz banger from hymanquartz01, plenty of room for big fat dabs and the 3mm ensures it has lots of thermal energy capacity.
 

blazedd

Well-Known Member
are bangers and nails actually chill from dhgate?
always kept hearing to steer away from those accessories on dhgate because of toxic poison and not true t1 or t2 grade quality.. not sure. but actually do need a new banger, my current one is getting a funky taste and now im wondering if this one was china made or not. how about quartz from china?
 
blazedd,
  • Like
Reactions: NorVape

Errly Kyler

New Member
I have this little beaker and I love it. Makes a good travel rig as well.

I use mine with a 90 degree banger because I lean the piece back when im using it. That way the slits in the stem are better covered by the water and the banger sits level.

If you are looking for a domed set up I find the flux nails work well. They have a good sized cup to hold a decent dab.
Thanks for the info man! I pictured using it with a 90 degree banger and leaned back just like you describe. Guess this tube and a 4mm thick 10mm banger from jlhsmoking will be my next purchases. Just trying to make myself wait to order until after my ccg egg shows up. The struggle is real.
 

u bwade wunner

Well-Known Member
Haha looks like we have perc options now for the FC MOD:rockon:

http://www.dhgate.com/product/2015-new-34-5cm-height-glass-bong-with-matrix/255741536.html


hope to get both Matrix and showerhead percs x 2 with this piece and have some fun....would be good to see more percs as accessories

Do folks here still want extra perc options for the FC-MOD? Or are the matrix and showerhead enough?..specifically what percs for the main chambers would work?

Reti?.......Maybe a nice tree....or a 5 hole concentrate perc would work maybe.
 
Last edited:
Haha looks like we have perc options now for the FC MOD:rockon:

http://www.dhgate.com/product/2015-new-34-5cm-height-glass-bong-with-matrix/255741536.html


hope to get both Matrix and showerhead percs x 2 with this piece and have some fun....would be good to see more percs as accessories

Do folks here still want extra perc options for the FC-MOD? Or are the matrix and showerhead enough?..specifically what percs for the main chambers would work?

Reti?.......Maybe a nice tree....or a 5 hole concentrate perc would work maybe....

Diffusion Pump Perc!
Edit: I wish that would've been an option when i ordered. I'd have ordered two showerheads. And Steve should also sale the percs individually
 

u bwade wunner

Well-Known Member
Diffusion Pump Perc!
Edit: I wish that would've been an option when i ordered. I'd have ordered two showerheads. And Steve should also sale the percs individually
Can You elaborate? A Rough sketch maybe with good function??
I think the top joint is 29mm ,so long as it has room and slides in. Golden.
 
u bwade wunner,
Can You elaborate? A Rough sketch maybe with good function??
I think the top joint is 29mm ,so long as it has room and slides in. Golden.
This is a Diffusion Pump Perc
2015-new-glass-smoking-bongs-based-water.jpg
 
Top Bottom