Dynavap VapCap

N

Nilsson

Well-Known Member
VapCap said:
I am only able to ship out a limited number at this point as I am still waiting on my caps. I am trying to get as many out as I have parts for. Please be patient and understand I want to get these out at least as much as anyone wants theirs. I understand the sooner I get these in your hands the sooner you will share with your friends and then my business grows. So here's to simplicity, on its way soon.

Thank you,

George
Click to expand...

@VapCap No need to rush, this is the first product i backed ever, and even it was only 30.- USD, i hope you will be successful and that you give us (the backers) more insight in what you do with the money to start your business. I don't feel that this insight is a must for you, but it would be a plus for my experience as a backer. Thank you for reading this thread, i will wait patiently for my vapcap.
 
vaporonly

vaporonly

living in a van down by the river
IAmKrazy2 said:
Just a little update for all you Cap Heads (can i coin that term now?)

One of my two triple torches died when i was out and about. I had a single torch in my trunk and was forced into using it. After a little practice, i am beginning to enjoy the single torch a lot. At the moment, better than the triple torch. I like being able to use the base of the cap for higher temp and the tip for lower temps. This is without a doubt one of my favorite vapes at the moment, and i am itching to try the Pyro (even more than the TI/Woody)

Cheers all you Cap Heads.
Click to expand...

And you guys thought I was crazy saying I liked the single torch...what's crazy is now i'm back to the triple one.

I concur about this being one of my fav vapes. I'm still on the vapcap challenge of using it as my only vape.

I hope it is some consolation to those waiting that the vapcap is worth the wait!
 
R

rweed

Active Member
I really just love the idea that if something goes wrong with your power source, you can just find another lighter that will get the job done

EDIT
Has anyone noticed the new posts on facebook that says the store is open? I can't get in yet but I think this means the online preorders will reopen soon. Hopefully George can update us on what's going on soon!
 
Last edited:
YaFreekin Right

YaFreekin Right

Well-Known Member
Getting more & more excited about this little vape. This will be my portable till my Grasshopper arrives & my back-up after that.

The simplicity is what makes this so elegant.

rweed said:
Has anyone noticed the new posts on facebook that says the store is open?
Click to expand...

That post was before paypal gave him the boot(last post I see is from Aug 9th).
 
Last edited:
shark sandwich

shark sandwich

"shit sandwich"
Accessory Maker
The store has been down for two weeks now, but may be offline for reasons beyond the payment service issue.

There have been products and options shown in this thread that were never available in the old store. The new store may have new products and options added that will need to be priced, photographed, described, and programmed.

Also, George is supposed be recieving that bulk shipment of caps any time now, and then shipping can begin in earnest. I imagine getting the store back online and getting orders shipped are the two top priorities at Dynavap right now, but that doesn't mean they can make it happen instantaneously.

I'm a backer for a wood/ti model. I don't know if I'll get to pick a wood type or any other options before my order ships, or if I'll just get an envelope in the mail one day. Either way, I'm excited for Dynavap to get over this hump- there should be good things coming soon.
 
Last edited:
Madcap79

Madcap79

Jack of all trades, master of none.
A couple pics. I'll post a video once I get a better lighting situation.

Edit: Forgot to point out that the VapCap fits great in @Ratchett 's UD adapter! I think I have a way to rotate the unit while it's on the glass piece. Stay tuned.

15dw8kw.jpg


xljee1.jpg
 
Last edited:
Hongitis

Hongitis

Well-Known Member
Hi so I've been just a lurker but I received my vapcap a week ago and been using it a lot. But Iono about you guys but my vapcap does not get visible vapor unless I close and release the carp. I'm contemplating if it is due to the fact the maybe the cap has little gaps along the glass.

http://i.imgur.com/Pv2o1eDh.jpg

Furthermore Still waiting on my pyrovap should of been here I ordered it a week after I bought the vapcap

Ps time for a kief vape
http://i.imgur.com/KNj27G8h.jpg
Cheers
 
Last edited:
Madcap79

Madcap79

Jack of all trades, master of none.
I only get visible vapor when I close the carb. Without the carb closed there is too much fresh air mixing in. It'll still get you where you want to go with the carb open but you won't get the visual feedback that most people enjoy.
 
B

battlepants

New Member
Hongitis said:
Hi so I've been just a lurker but I received my vapcap a week ago and been using it a lot. But Iono about you guys but my vapcap does not get visible vapor unless I close and release the carp. I'm contemplating if it is due to the fact the maybe the cap has little gaps along the glass.

http://i.imgur.com/Pv2o1eDh.jpg

Furthermore Still waiting on my pyrovap should of been here I ordered it a week after I bought the vapcap

Ps time for a kief vape
http://i.imgur.com/KNj27G8h.jpg
Cheers
Click to expand...

Were you a regular backer? I was an "I want it now" backer and haven't gotten anything.
 
battlepants,
cybrguy

cybrguy

Putin is a War Criminal
Hongitis said:
Hi so I've been just a lurker but I received my vapcap a week ago and been using it a lot. But Iono about you guys but my vapcap does not get visible vapor unless I close and release the carp. I'm contemplating if it is due to the fact the maybe the cap has little gaps along the glass.
Click to expand...

If I understand correctly that is where the air intake is, so no, not a problem. From my reading it would seem that the VapCap is not intended to be a very cloudy vape, so expecting them would be unfair. "Does it give you a buzz?" should be the operative question.

My understanding is that the PyroCap IS intended to produce clouds with liquids...

I look forward to trying out the VapCap, and not being a cloud chaser I won't be looking for them so won't be disappointed.

Edit: From the about screen on the website. Last line is operative. "Discrete– Our VAPS are small enough to easily fit into a pocket. The reusable packaging functions as an airtight carrying case. There is not enough metal in either device to be problematic with metal detectors. Best of all, there is very little odor or cloud produced (except when e-fluid is used in the PyroVap.)"
 
Last edited:
Adobewan

Adobewan

Well-Known Member
Hongitis said:
Hi so I've been just a lurker but I received my vapcap a week ago and been using it a lot. But Iono about you guys but my vapcap does not get visible vapor unless I close and release the carp...
Click to expand...
Thinking it may be your material, or perhaps your grind.
I never use the carb and achieve consistent clouds. Not many due to chamber size, but used properly, I think the unit produces surprisingly good clouds particularly for its size.
 
R

rweed

Active Member
I got my replacement glass! I am really enjoying this little guy! I can see myself sneaking him with me haha. I see what George meant by it's effectiveness. The AVB is very dark showing just how efficient the VapCap is! The case it comes with is super cool because it fits the vc perfectly to the point that it doesn't rattle! I can't tell whether or not the vc is in the case just by holding the case. IT'S THAT LIGHT! I really like holding my vc like a cigarette when vaping but it is a much better experience holding the carb when taking hits so I am looking for some kind of middle ground.
 
7

7EON

Well-Known Member
rweed said:
I got my replacement glass! I am really enjoying this little guy! I can see myself sneaking him with me haha. I see what George meant by it's effectiveness. The AVB is very dark showing just how efficient the VapCap is! The case it comes with is super cool because it fits the vc perfectly to the point that it doesn't rattle! I can't tell whether or not the vc is in the case just by holding the case. IT'S THAT LIGHT! I really like holding my vc like a cigarette when vaping but it is a much better experience holding the carb when taking hits so I am looking for some kind of middle ground.
Click to expand...
How evenly does it vape the material?
 
You must log in or register to reply here.
Top Bottom