Cheap High Quality Bubbler

Melting Pot

Sick & Twisted
I'm looking for my "perfect" dab glass. I currently own a FC-187 v2, a FC-710, and a CCC Torus. All were purchased from DHGate after discovering them in this thread. I guess that I have determined that I like a bit more diffusion rather than flavor.

I don't really care for the Torus and the 710 is "okay." My favorite by far is the FC-187. But, there are a couple of things that I wish I could change about it, too. I don't particularly care for the sidecar mouthpiece, and the female joint sitting on top makes it difficult to use a drop down.

So, does anyone know of a DHGate piece that uses the perc from the 187, but that has a mouthpiece similar to the 710? and has the nail joint coming from the side instead of the top like on the Torus? Preferably in 18mm female?

I've searched on the site and didn't find anything with that criteria. But, according to my wife, I'm both blind AND clueless when looking for something. So, I thought I would ask here to see if anyone has any ideas.

Thanks!
Check out the GB186
Stereo matrix

http://www.dhgate.com/store/product/mobius-stereo-matrix-2015-new-34cm-heights/245686309.html
 
Last edited:

luigii

Member
That's the dp-mini I've been working on with Steven. It should be about the same size as the fc-710, with a body style similar to the fc-mini, and a banger hanger out front instead of a joint on top. There's more info in the custom glass ideas thread, including the most recent design image.

The first sample was supposed to be finished last week- did Steven give more info on when it might be ready?

Edit, I found the mock-up image so you don't have to dig for it:

wioWSpV.jpg
Thanks :) I replied in the custom glass thread...
 
luigii,

Delta3DStudios

Well-Known Member
Accessory Maker
So, does anyone know of a DHGate piece that uses the perc from the 187, but that has a mouthpiece similar to the 710? and has the nail joint coming from the side instead of the top like on the Torus? Preferably in 18mm female?

I suggest you check out the GB-242. It's small, but one of my favorite pieces:

http://www.dhgate.com/product/glass-bong-glass-oil-rig-bong-smoking-pipe/211852248.html
glass-bong-glass-oil-rig-bong-smoking-pipe.jpg


rBVaGlRGQVSAZ39jAAB44ruBQlA333.jpg



True, the matrix perc isn't the same as the GB-187, but it's similar. And this piece has an awesome vortexing recycler which helps add a bit more diffusion to the piece.

The mouthpiece is very similar to the FC-710, however I should note the GB-242 glass is on the thin side, if you're prone to breaking stuff, you might want to pick up two of these!
 

snackmaster

Well-Known Member
I'm looking for my "perfect" dab glass. I currently own a FC-187 v2, a FC-710, and a CCC Torus. All were purchased from DHGate after discovering them in this thread. I guess that I have determined that I like a bit more diffusion rather than flavor.

I don't really care for the Torus and the 710 is "okay." My favorite by far is the FC-187. But, there are a couple of things that I wish I could change about it, too. I don't particularly care for the sidecar mouthpiece, and the female joint sitting on top makes it difficult to use a drop down.

So, does anyone know of a DHGate piece that uses the perc from the 187, but that has a mouthpiece similar to the 710? and has the nail joint coming from the side instead of the top like on the Torus? Preferably in 18mm female?

I've searched on the site and didn't find anything with that criteria. But, according to my wife, I'm both blind AND clueless when looking for something. So, I thought I would ask here to see if anyone has any ideas.

Thanks!

Or maybe something like this?

n0IaEtU.jpg


http://www.dhgate.com/store/product/brand-glass-bong-good-quality-two-function/235639609.html
 
snackmaster,
  • Like
Reactions: ataxian

Detonator

Well-Known Member
any body use the gb-187 with a Sublimator? http://www.dhgate.com/product/19-mm.../239974503.html?recinfo=17,0,5#svh-5-5|null:0

I want to use it like it is or maybe put a whip on the mouth piece like

It reminds me of some of the cool / expensive glass I seen Enrico using..

I also like the UFO but I wish it had a side car down stem... Can someone get that made for us?

cause I dont use water and the sub constantly drip oil / sublimate that need to be plucked off the bottom, which is surprisingly easy, but only on a smooth easy to reach with a poker surface...

suggestion? I been here a few times still haven't pulledthe trigger
 
Detonator,
  • Like
Reactions: ataxian

cybrguy

Putin is a War Criminal
cause I dont use water and the sub constantly drip oil / sublimate that need to be plucked off the bottom, which is surprisingly easy, but only on a smooth easy to reach with a poker surface...
So, wait, you are using the glass (UFO) without water? Does anyone else do that? It is a new one on me...
 
cybrguy,

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
So, wait, you are using the glass (UFO) without water? Does anyone else do that? It is a new one on me...
Heh, he's not alone. I use my simple 4 slit downstem straight tube as a gigantic steamroller too! Works better than my hammerhead/barrel perc oil rig dry that's for sure.
 
Quetzalcoatl,
  • Like
Reactions: ataxian

cybrguy

Putin is a War Criminal
So, I'm having a little trouble with the logic. Are you looking for just a little cooling with no moisture added? Visual cues on vapor status (like using a j-hook w/lotus)? With no CE or even water the glass would collect vapor more easily I would think cleaning might be worse. Just trying to understand what dry glass would give you...

Maybe if using like a steamroller you are collecting the vapor and pulling it deeper by carbing it?
 
cybrguy,

tepictoton

Well-Known Member
That one passed by a few times already. Think consensus is that it is a fun thing to see, but function wise it is not really good (high drag).

So if this would be your daily piece I would say look for something else.

Just my two cents.

Check out the stuff from Steven or yingmin that are often talked about here ;-)
 

Detonator

Well-Known Member
So, wait, you are using the glass (UFO) without water? Does anyone else do that? It is a new one on me...

Right now I'm using a bong capped at the top with a whip,, no water

20140416_045451_zpsd8ugzwgz.jpg


I wish the UFO had a side car down stem... I relly like the UFO but I think dripping sublimate into the middle of it w/ that perc would get all gummed up..

2015-new-16-5cm-height-glass-bong-head-show.jpg


Anybody got any other idea for cool glass like I see Enricho using on his Sublimator? but in affordable glass?

but I'll probably just get something like this - but I want to know if you think
the down stem on this piece is long enough for the Sub?
smoking-water-pipe-glass-hookahs-with-19mm.jpg
 
Last edited:
Detonator,

Delta3DStudios

Well-Known Member
Accessory Maker

That's the infamous "D20-Q" it was discussed several months back
https://www.google.com/search?q=d20-q+site:fuckcombustion.com

I had one, kept it less than 24 hours before I resold it for the price I paid. Requires a MASSIVE pull to get the tornado going. I found my load was cached by the time the vortex action started (and mine was a pretty horrible vortex action).

I think for combustion, it's a cool piece, but for vaping, no thanks
 

u bwade wunner

Well-Known Member
Zero water in my UfO set up too.

I mainly medicate direct draw over using glass for conservation and flavour reasons but I enjoy rips through the UFO with the cloud buddy and Hose.I ve added my own hookah sleeved hose to make the set up easier on the eye

I looked at enricos Sublimator setup with the launch tube back in the day and decided to try glass dry with my logs.the can stays clean longer dry and cooling is ample through the perc.I PBW maybe once a week.its trippy watching vapor form in a can dry.it reacts differently and darts off at angles and becomes quite a show.

the UFO is a nice piece for those big hits.id like to see It made in a smaller version for flavour conservation,say do20 size or even ion size maybe.With the current size You lose flavour but you do make up for that with cooler hits so it evens out.

Ive asked steven to do a smaller size whip model but he wants dimensions diagrams etc and its really just removing a mouthpiece and adding a gong for a hose.

moving along it makes sense to make the UFO can joint for the mouthpiece "male" so the devastator hydratubes coming would work with the UFO .i have female angle hose connectors here and they stay cleaner than the male ones and look just as good

he ll figure it out eventually.:sherlock:
 
Last edited:

snackmaster

Well-Known Member
id like to see It made in a smaller version for flavour conservation,say do20 size or even ion size maybe.With the current size You lose flavour but you do make up for that with cooler hits so it evens out.

Yes, please! Love the UFO, but would definitely prefer (or at least like the option of) a smaller version.

Gonna have to try it dry now...
 

u bwade wunner

Well-Known Member
Yeah I agree perfect for the solo,Vapman etc.hose is easy to share too and doesn't impair flavour,dilutes it a bit yes.
 
Last edited:
u bwade wunner,
  • Like
Reactions: Nugg

Trogdor

Vapinating the peasants
Right now I'm using a bong capped at the top with a whip,, no water

20140416_045451_zpsd8ugzwgz.jpg


I wish the UFO had a side car down stem... I relly like the UFO but I think dripping sublimate into the middle of it w/ that perc would get all gummed up..

2015-new-16-5cm-height-glass-bong-head-show.jpg


Anybody got any other idea for cool glass like I see Enricho using on his Sublimator? but in affordable glass?

but I'll probably just get something like this - but I want to know if you think
the down stem on this piece is long enough for the Sub?
smoking-water-pipe-glass-hookahs-with-19mm.jpg

Have you heard of the GB-234 (atomic perc bubbler sometimes)? seems to be what you're looking for, my only concern would be that the tilt on the joint might make it difficult to balance the sublimator, it's already somewhat iffy with my solo

1.0x0.jpg


http://www.dhgate.com/product/best-...mic-prec/212873455.html#myaccount_left-3-null
 
Trogdor,
  • Like
Reactions: ataxian

Hashsnob

Member
I'm looking for my "perfect" dab glass. I currently own a FC-187 v2, a FC-710, and a CCC Torus. All were purchased from DHGate after discovering them in this thread. I guess that I have determined that I like a bit more diffusion rather than flavor.

I don't really care for the Torus and the 710 is "okay." My favorite by far is the FC-187. But, there are a couple of things that I wish I could change about it, too. I don't particularly care for the sidecar mouthpiece, and the female joint sitting on top makes it difficult to use a drop down.

So, does anyone know of a DHGate piece that uses the perc from the 187, but that has a mouthpiece similar to the 710? and has the nail joint coming from the side instead of the top like on the Torus? Preferably in 18mm female?

I've searched on the site and didn't find anything with that criteria. But, according to my wife, I'm both blind AND clueless when looking for something. So, I thought I would ask here to see if anyone has any ideas.

Thanks!

The D-Cycler is a really popular dab rig from DHgate, I use it every day. Has a mouth piece similar to the fc-710 and the joint comes from the side like you wanted.
http://www.dhgate.com/store/product/8-7-inch-glass-recycler-amazing-vortex-recycler/216222776.html

 

zippy

Well-Known Member
Right now I'm using a bong capped at the top with a whip,, no water

20140416_045451_zpsd8ugzwgz.jpg


I wish the UFO had a side car down stem... I relly like the UFO but I think dripping sublimate into the middle of it w/ that perc would get all gummed up..

2015-new-16-5cm-height-glass-bong-head-show.jpg


Anybody got any other idea for cool glass like I see Enricho using on his Sublimator? but in affordable glass?

but I'll probably just get something like this - but I want to know if you think
the down stem on this piece is long enough for the Sub?
smoking-water-pipe-glass-hookahs-with-19mm.jpg
I use stevens original Ufo release,i use it with one of Kathy reclaimers which does an ok job at reclaim.At least it stops the ufo percy gumming up.
 
Top Bottom