My secret to THC E-Cig PG-Liquid... Potent, Effective, Cheap, Easy!!!

StheDubya

StheDubya

Active Member
juturna72 said:
I kind of want to try putting a 1.6ohm coil in my K1. Would anyone recommend this? And what would you run that at? I have an aspire vv
Click to expand...
I like the 1.6 at 3.6-3.8 on the vv. Works better with quick hits

juturna72 said:
Has anybody every made a puff majic mix with a 1.5:1 ratio or a 1:1 ratio? If so how did it turn out? Did you like it?

I think the wax I can get where I live is most likely always going to be on the weaker side. The 2:1 works well and much better than before but still not to my liking. Maybe I should take a break from all things thc for a few weeks because even dry herb doesnt hit me as hard either haha
Click to expand...
1.5:1 is ok but 1:1 is a to thick for tanks. Your gonna get more dry hits.

Hyphy said:
I can understand that someone can really like a product but he promotes it like he's affiliated. No offense Dubya, it's just how it comes across to me.
Click to expand...
Its cool man. I love the shit. Can see your point. I only post on stuff I know about. Probably have more time using puff majic than most here. I promote the hell out of all things that work good for me. Just my style.

psychonaut said:
Which coils were you having leaks with on your aerotank? I've ran about 3ml through my new aerotank mini and it's as clean as a whistle yet. Im using 2:1 with puff majic. Hoping it stays like this!

I saw kanger has some new coils VOCC, organic Japanese cotton, they have much larger holes than the previous versions so maybe they will work better with thicker liquids?
Click to expand...

I bought a new Aerotank when I was out trying to find the VOCC coils. Had to order the coils. Not having luck with the new Aerotank. Tried both coils. On my ESP30w (I use a 510-ego converter) the resistance that the mod sees jumps all over. Screw on my old one and works fine and a K1 works fine. Put the new one back on and every time I pop the button it sees different ohm. Any ideas. Hope when I get the vocc they are better.
 
StheDubya,
psychonaut

psychonaut

Company Rep
Company Rep
StheDubya said:
I bought a new Aerotank when I was out trying to find the VOCC coils. Had to order the coils. Not having luck with the new Aerotank. Tried both coils. On my ESP30w (I use a 510-ego converter) the resistance that the mod sees jumps all over. Screw on my old one and works fine and a K1 works fine. Put the new one back on and every time I pop the button it sees different ohm. Any ideas. Hope when I get the vocc they are better.
Click to expand...

It sounds like the wire inside the coil housing is loose. Does it do the same thing with another coil?

I've been using the VOCC for a couple of days and it's working great, nice flavor.
 
psychonaut,
StheDubya

StheDubya

Active Member
psychonaut said:
It sounds like the wire inside the coil housing is loose. Does it do the same thing with another coil?

I've been using the VOCC for a couple of days and it's working great, nice flavor.
Click to expand...
Yep. Im frustrated and waiting on the VOCC coils. I tried the extra coil the kit came with and it did the same thing. When the VOCC come in hope they work. Realy like the Kanger build quality being stainless but again the Aspire K1 proves its reliability to me. Might have to email Aspire and suggest a small SS tank:)
 
StheDubya,
macbill

macbill

Oh No! Mr macbill!!
Staff member
A dedicated vape store steered me wrong. They claimed their liquid flavoring would dissolve and suspend solid concentrate. Vape Troopers, an ejuice company out of California, does not work. The concentrate separates. I hope I can salvage most of the concentrate.
 
macbill,
L

lesvape

Queer in a high haze
I know the mPT3 and newer are recommend, but I am also seeing now the nautalis mini also getting a nod. I have the K1 for regular e-cig and it's okay. But between the nautilus Mini vs mPT3/mAT, which is the better product for pure gold, and other liquids one can purchase at the store? I am not too keen o the nautilus minis size, but if it's the overall better product that leaks less and is works better then I will get that over the competing kanger models. Thank you.
 
lesvape,
DVision44

DVision44

Well-Known Member
lesvape said:
I know the mPT3 and newer are recommend, but I am also seeing now the nautalis mini also getting a nod. I have the K1 for regular e-cig and it's okay. But between the nautilus Mini vs mPT3/mAT, which is the better product for pure gold, and other liquids one can purchase at the store? I am not too keen o the nautilus minis size, but if it's the overall better product that leaks less and is works better then I will get that over the competing kanger models. Thank you.
Click to expand...

I have the nautilus mini and have had no problems with leaking. It has worked perfectly for my juice since day 1. I'm currently using it with an istick TC40 at 3.7v. Expecting Nickel 200 coils in the mail anyday now to use it in TC mode.
 
DVision44,
  • Like
Reactions: lesvape
zor

zor

Well-Known Member
I acquired two 1mL aliquots of some flavorless Alpine refills, indica and sativa. I loaded the sativa extract into my Kanger tank sub pro 2 whateverthehellit'scalled and popped that on my omicron, excellent effects! It is far more potent compared to my 1.5g of hash oil in 2mL ofpuffmajic, so while the latter is great for maintaining a good buzz or achieving a nice state where I don't want to be obliterated (e.g. concerts) the former is gonna be great when I lose myself in a big field or the woods :)
 
zor,
StheDubya

StheDubya

Active Member
psychonaut said:
It sounds like the wire inside the coil housing is loose. Does it do the same thing with another coil?

I've been using the VOCC for a couple of days and it's working great, nice flavor.
Click to expand...
Got the VOCC coils. You are right about the nice flavor. The new Kanger stuff doesn't work on my box with the adaptor though. That's a deal breaker for me because I really like my esp30. They do work alright on my pen.

lesvape said:
I know the mPT3 and newer are recommend, but I am also seeing now the nautalis mini also getting a nod. I have the K1 for regular e-cig and it's okay. But between the nautilus Mini vs mPT3/mAT, which is the better product for pure gold, and other liquids one can purchase at the store? I am not too keen o the nautilus minis size, but if it's the overall better product that leaks less and is works better then I will get that over the competing kanger models. Thank you.
Click to expand...
The K1's my pick for reliability. Those little guys never let me down. For my vaca I got 2 nautilus minis. Wanted some more size for the road. Not one problem or a leak. Passed the airplane and the hot pocket test. A little big for a pen but looked right on top of my box.

zor said:
I acquired two 1mL aliquots of some flavorless Alpine refills, indica and sativa. I loaded the sativa extract into my Kanger tank sub pro 2 whateverthehellit'scalled and popped that on my omicron, excellent effects! It is far more potent compared to my 1.5g of hash oil in 2mL ofpuffmajic, so while the latter is great for maintaining a good buzz or achieving a nice state where I don't want to be obliterated (e.g. concerts) the former is gonna be great when I lose myself in a big field or the woods :)
Click to expand...
I f your talking about the co2 extracts that are already liquids you got too much majic with your oil. Now days with oils I use just enough to get a good flow in my tanks. Last time I got some I used .8ml Puff Majic to 1ml co2 oil. 2 hits and your baked off your ass.
 
StheDubya,
  • Like
Reactions: zor
zor

zor

Well-Known Member
StheDubya said:
I f your talking about the co2 extracts that are already liquids you got too much majic with your oil. Now days with oils I use just enough to get a good flow in my tanks. Last time I got some I used .8ml Puff Majic to 1ml co2 oil. 2 hits and your baked off your ass.
Click to expand...

Ah, no I didn't add any extra puffmajic or anything, just loaded the CO2 oil straight up.
 
zor,
GuyLeDuche

GuyLeDuche

^ "Eat a bag of Dick's!"
So I ordered 3 flavors of the LorAnn's candy flavoring to punch up my juice, and I must say I am really impressed. I just got them earlier so I've only sampled the Cherry, but 3 drops mixed into 2ml EJ and 1g oil had it tasting just like a red Lifesaver lol. I still have Blackberry and Orange Cream to try, and maybe a fruit cocktail haha.

This is where I ordered, kind of a good shipping setup for multi flavor ordering, but I think the smallest size they make. I figure at 3 drops a batch it will still last months per jar so I'm not bothered.
http://www.ebay.com/itm/40063671167...49&var=670190095789&ssPageName=STRK:MEBIDX:IT
 
GuyLeDuche,
  • Like
Reactions: macbill
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
beeswax said:
Are either Puff Majic or EJmix available in brick and mortar places at all?
Click to expand...
I've seen them at a local headshop. They're pretty big and I'm fairly certain either the owners or one of their employees watches FC because they've got a LOT of vaporizers and different parts for them that I wouldn't expect your regular headshop to carry (everything from MFLB and VaporGenies to Bender/Hercules attachments for Persei and their Nibbler bubblers). I saw Puff Magic the second to last time I went in. Your best bet would be to call the local headshops around your area and ask so you can save yourself the trip.
 
Quetzalcoatl,
CharlieBelmont

CharlieBelmont

Well-Known Member
420ms3 said:
has any1 tried out the vapeur extract yet? besides gazahn..
Click to expand...

I have now tried out all 3 brands. For the Vapeur Extract (VE?), I got the one with hops. The flavor is very similar to the Majic original, but you can tell it has some VG sweetness and hence seems to produce a bigger cloud. Both mix pretty easily. Both taste better than the EJ to me personally. So far Magic and VE are close, but am leaning towards the Vapeur Extract. The VE (at least the one I ordered) does not have any artificial flavors. The Majic FAQ states "Some blends contain artificial flavors that are regularly used in the vapor liquid industry." I think it leaves little bit of a sugary aftertaste in my mouth because of that (probably not the best for the lungs either??).

My method for mixing is pretty dialed in now. I put a shot glass on top of my enano for a couple minutes, add about half the amount of mix and let it warm up for a couple minutes, then add the concentrate and the rest of the drops on top. Stir for a few minutes holding it on top of the nano and it mixes up really quick.
 
CharlieBelmont,
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
CharlieBelmont said:
I have now tried out all 3 brands. For the Vapeur Extract (VE?), I got the one with hops. The flavor is very similar to the Majic original, but you can tell it has some VG sweetness and hence seems to produce a bigger cloud. Both mix pretty easily. Both taste better than the EJ to me personally. So far Magic and VE are close, but am leaning towards the Vapeur Extract. The VE (at least the one I ordered) does not have any artificial flavors. The Majic FAQ states "Some blends contain artificial flavors that are regularly used in the vapor liquid industry." I think it leaves little bit of a sugary aftertaste in my mouth because of that (probably not the best for the lungs either??).

My method for mixing is pretty dialed in now. I put a shot glass on top of my enano for a couple minutes, add about half the amount of mix and let it warm up for a couple minutes, then add the concentrate and the rest of the drops on top. Stir for a few minutes holding it on top of the nano and it mixes up really quick.
Click to expand...
I've dripped pure VG onto my ecig coils before and it has a slightly sweet taste and aftertaste. Straight from the bottle, USP. I've also had ecig juices that have sucralose in them and are very sweet. Jury is out on whether it's bad to inhale, personally I shy away from added sweeteners.
 
zor

zor

Well-Known Member
Hm, the coil in my kanger tank burned out the other day, after about a week of low use with my THC juice (puffmajic base). I'm surprised at how brief the lifespan of the coil was, will now start considering building my own coils or perhaps looking into a different tank/atmozier setup. I've been using the kanger protank 2 at around 3.9V, is it worth sticking with this and making/buying some cotton coils or are there more durable coils out there that I should consider?
 
zor,
GuyLeDuche

GuyLeDuche

^ "Eat a bag of Dick's!"
I tried the Kanger MPT3 for a while, but was really turned off by the coils flavor loss after just a few puffs, with vapor production usually way down before half the tank was gone.
I'm now using the Aspire K1 with much better results. I'm cheap so when I empty a tank I toss the coil in ISO to soak, reusing them usually 3-4 times before I toss them. Not a coil style I would try to rebuild, but at $12 for 5 that's 15-20 fill-ups for me so I'm fine with tossing them.
 
GuyLeDuche,
  • Like
Reactions: zor
zor

zor

Well-Known Member
After some more investigation, I began to strongly suspect the THC juice I made as the source of the burnt flavors and issues I've been recently experiencing. I did some experimenting, made a 1:1 dilution of 1mL of Alpine indica with 1mL of puffmajic and loaded that into a brand new tank. It vaped unbelievably smooth, even at higher power.

I went back to my 1g of oil dissolved in puffmajic and immediately, at a lower voltage, I tasted and felt something burnt. I tried further heating/diluting/messing around with this batch but it just got realllly gross and ugly, lots of precipitates and I just gave up.

So, I'm not fully convinced yet, but I strongly suspect the reason my coil burned out a few days ago was due not to typical use but rather some of the oil condensing on the coil or simply crashing out of solution and causing problems. Very speculative and anecdotal, and I now realize that the oil I used wasn't the cleanest and probably had enough contaminants to cause these issues.

Back to experimenting with making some better thc juice with the concentrates I have....
 
zor,
StheDubya

StheDubya

Active Member
When you get some dirty concentrates it can make a crappy vaping juice. I have bought different strains from the same extracts company at the same time. One mixed nice and didn't change coils for the whole time. The other looked a little dirty and cloudy but I went with it. It made some juice that a coil lasted 3-4 days. Both in the same majic, both in a K1. To fix it, I sucked it back out and filtered it. New coil and it was a great vape. But boy dirty concentrates can clog some coils up fast. I used some ss screen but even a coffee filter should clean it up.
 
zor

zor

Well-Known Member
Yeah, I tried to filter my dirty mix with a piece of a torn french press mesh but that didn't work. I also had a mess of two different types of ejuices (puffmajic and something else that came with my recent tank, I knew I shouldn't have mixed the two!). I'm reluctant to use a paper filter because of potential liquid loss, but it may be better than nothing! Any other kinds of filtering options that you guys recommend?
 
zor,
You must log in or register to reply here.
Top Bottom