justcametomind
Well-Known Member
If I had a problem about the order I think this could be the worst moment to purchase via massdrop, but thanks for the info regardless.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Rayvon
Well-Known Member
Alright folks I wanted to ask how comparable to the SSV is it really ?
I ask as an SSV owner myself, I never really got on with it, and im fed up with not being able to get replacement parts, particularly whips, without paying an arm and a leg to get them imported.
Fed up of trying to find a firm that sells the right size tubing too, I have about five lots here I ordered for whips using the measurements but when they came they were wrong, 3/8" ID, 1/2" OD just gets me stuff that is the wrong size here in the UK its all miles too big.
I need a change for my daily use, was thinking of just going back to da buddha ( as it was my favourite vape i ever used) but i think its time i moved up in the world and I would really prefer to not have to spend money and time trying to find a whip supplier every few months
I ask as an SSV owner myself, I never really got on with it, and im fed up with not being able to get replacement parts, particularly whips, without paying an arm and a leg to get them imported.
Fed up of trying to find a firm that sells the right size tubing too, I have about five lots here I ordered for whips using the measurements but when they came they were wrong, 3/8" ID, 1/2" OD just gets me stuff that is the wrong size here in the UK its all miles too big.
I need a change for my daily use, was thinking of just going back to da buddha ( as it was my favourite vape i ever used) but i think its time i moved up in the world and I would really prefer to not have to spend money and time trying to find a whip supplier every few months
VapourHaze
Rexcornish on IG, Vaping since '02
The market place in Brighton sells 7th floor whip tubing.
The mighty can deliver clouds comparable to an ssv... my ssv has been on loan for 8 months .. i dont really miss it much either.
Rayvon
Well-Known Member
Cheers, I reckon im going to go for it and get the mighty, seems like less of a ball ache all round as well really.
I think mighty would be best suited over the crafty, the battery life is important for me and the portability less so, although I would like to take it to hotels and stuff.
I fancy having something that does not plug in for a change.
I think mighty would be best suited over the crafty, the battery life is important for me and the portability less so, although I would like to take it to hotels and stuff.
I fancy having something that does not plug in for a change.
Do you guys find that with the mighty, you get a lot of mystery smoke. Is it just because it's not clean? I literally can get big hits of an EMPTY bowl. I feel like it's slightly better after a cleaning, but after smoking ten bowls, I feel like the smoke never ends. So I take the load out, and I can get tons of smoke off an empty chamber!!!! I used some budder in the mighty when I first got it, and I feel like some residue went/leaked down into the heating part. I don't know if it's that, or simply because it's dirty.
WakeAndVape
VapeLife X
I didn't see anything in the video as far as mystery smoke...i think your okay. Do you have a layer of resin between the metal oven and that plastic ring that sits on top? No matter how hard I try I can't get that one place 100% clean. And it does cause a small amount of continuous vapor even if the chamber is empty.
Vapetrees
Vaped Out
That's why I choose the Mighty over the crafty as well because I had read about a lot of people having issues with the battery and also warm up times. I didn't want to have to wait 3 minutes to use my vaporizer.
FOAMING MAD
Well-Known Member
I just bought mine had it for about 3 weeks. Then started reading about the updates. Didn`t like the 1 min.
shut off.
But I was , will be loving it again.
Friends who see it call it the baby V lol
shut off.
But I was , will be loving it again.
Friends who see it call it the baby V lol
Does anyone know of a source (Canada) for the seals? I'm severely lacking in the small seal for the CU. I find it deteriorates quickly (cracks/splits) and they are so easy to lose! The others I feel will last an eternity but I really need to pick up some of these small CU seals. I tried using the mouthpiece o-ring with little success and both of my Mighty's now have too much airflow (CU keeps wanting to pop open). Just checked torontoV and PV...but have nothing. I may need an FC brotha south of the border to help me purchase from that one site previously posted that had them but didn't ship to Canada! I need a bunch of these!
would ebay work to get items from the US?
http://www.ebay.ca/itm/FDA-SILICONE-O-RINGS-011-QTY-100-5-16-ID-X-7-16-OD-/190556587309?
Just need to find some silicone orings 8mm i/d 11mm o/d according to the post in the crafty thread.
Last edited:
esoh
Well-Known Member
jesus, me either, and it drives me crazy
anyone have a method for getting rid of this ring of grime without chipping/scratching our heating elements?
justcametomind
Well-Known Member
Just unscrew mouthpiece and the 2 parte of the cu, with the rings still on, and soak everything in iso for 15 minute. So much gunk? Try 20 or 30 bit don't sleep on it cause I burned 2 big rings that way. No damage to the little ones lol.
Marky
Active Member
It takes 90 seconds for my crafty to warm up. I find it very adequate for my needs. My mighty warms up faster, about 50 seconds. Both my units are less than 1 month old so that may be why.
Well, now my crafty wont warm up at all because it just bit the dust about 20 min ago! My button stopped working mid session and when I tried to double click for my booster temp, I felt no vibration. I tried it again as well as holding it to turn off the unit but no response at all. Luckily the timer shut it off. Looks like the button went dead! I just emailed SB about it so let's see how things turn out...
-Mark
WakeAndVape
VapeLife X
So...does that mean that heat up time is MORE than 90 seconds? Lol.
Marky's crafty #1I'm telling you...get the lily as a backup! When I sent my first mighty in for service the crafty broke too!
Luck is a crazy thing
Marky
Active Member
So...does that mean that heat up time is MORE than 90 seconds? Lol.
I'm telling you...get the lily as a backup! When I sent my first mighty in for service the crafty broke too!
Luck is a crazy thing
Nice tombstone lol. I actually got the crafty to work again. The button just decided to work when I attempted to turn it on about 2 hours after the defect occured. It acted up again shortly after and even gave me a weird vibration I never felt before. It was as if it was hesitating and didn't know what vibration alert to give me. I tapped the unit on the bottom with my hand and the button began to respond again. I just used a session on it right after I got off work less than an hour ago and it worked normally. I just tried it right now too while typing this just for the sake of trying it and it worked lol. I will still send it in with a written note letting them know it's going on and off because it will fail for good eventually. I read this is a common issue with both crafty and mighty so it's nothing new to them. I also see SB usually give a new unit in this case. I really don't care as long as it works flawlessly and stays like that when I get it back but getting a new one with a fresh shiny bowl and 0 hours would be nice.
As for the lily, I'm done buying vapes for a while. I have 6 vaporizers and I barely use many of them. I have enough backups but all I need is my mighty lol. Ever since getting my crafty and mighty I have retired all my vapes. The only other vape I use occasionally is my firefly and only cuz I like the taste and I actually know how to take draws from it and can get a similar experience to the crafty and mighty to be honest with you. But there's def a learning curve to it. The crafty and mighty however are very user friendly and consistent.
-Mark
Roth
Pining for the Mountains
This is strictly due to the amount of resin in your cooling unit. When it's time to clean mine, I can take massive rips off an empty bowl too. You just need to turn the temp up to max, and do a few slow, long inhales to get the CU nice and warm.
It really is amazing how much you can get from that if your stash is running low!
MinnBobber
Well-Known Member
Mighty owners and miniVAP too ?????
Hi to all Mighty/ miniVAP owners.
Does the miniVAP flexicone/wire basket module fit the Mighty chamber??
A picture would also be worth a thousand words.....
I love those mV modules for convenience and keeping the heating chamber spotless.
I hope the answer is yes.....
Thanks
Hi to all Mighty/ miniVAP owners.
Does the miniVAP flexicone/wire basket module fit the Mighty chamber??
A picture would also be worth a thousand words.....
I love those mV modules for convenience and keeping the heating chamber spotless.
I hope the answer is yes.....
Thanks
Vapetrees
Vaped Out
Damn that makes me want to change mine for the new updates, but it works well. The only problem is that it's breaking slightly where the CU goes. I'm afraid to be without for so long lol.
Damn that sucks, I had read on FC that after time the warm up times on the crafty were getting longer and longer and I didn't want that to happen to me. That sucks that yours just died. Hopefully the next one will last long.
Michel
Well-Known Member
I can't help you with a picture since I'm not at home and only have my mighty with me, but the small MV basket fits in the Mighty bowl and the CU can even be attached.
The flexicone makes a very good seal with the mighty bowl, too, when not using the CU. It can easily be used as a WT adapter this way if that was your question.
IMO performance drops significantly if I use the MV basket in the Mighty, so it was only a quick experimenting for me.
MinnBobber
Well-Known Member
..........................................................
Thanks, that's what I wanted to know.
So the small basket fits but not the regular 1/2" tall basket?
Can the Mighty CU be attached with the mV basket/flexicone if you remove the CU screen?
Or is the mV basket module too tall for that and the flexicone won't fit in the CU??
Michel
Well-Known Member
Exactly, the large basket won't fit at all, even without CU.
The flexicone is to large to fit under the CU. I guess you want to use preloaded baskets. This won't be possible, or you have to use the flexicone only for transport to seal the baskets to prevent material from spinning everywhere.
Best and fastest way to load the mighty (apart from smell) is the included filling aid. Or simply carry some nugs in the right size and "squeeze" them in the bowl. Works pretty well even without a stirring!
The flexicone is to large to fit under the CU. I guess you want to use preloaded baskets. This won't be possible, or you have to use the flexicone only for transport to seal the baskets to prevent material from spinning everywhere.
Best and fastest way to load the mighty (apart from smell) is the included filling aid. Or simply carry some nugs in the right size and "squeeze" them in the bowl. Works pretty well even without a stirring!
Vapetrees
Vaped Out
I used an old canister that came with a Cavi Cone I bought a my local(not really, it's near my job) dispensary.
BioSector
Well-Known Member
Made my muzzmod last night, all seemed to go well. I can't see any epoxy on the inside, guess I'll run some empty bowls to ensure nothing comes from epoxy. Thanks for the easy tutorial elmo!
I found a serious problem when I tried to use it with the water piece I already had though. It has a removable stem with diffuser and unfortunately it is too small to accept the reducer I got from OGB. I can remove that stem and it fits perfectly but then I lose out on more than half the filtration. Guess a visit to dhgate is in my future.
I found a serious problem when I tried to use it with the water piece I already had though. It has a removable stem with diffuser and unfortunately it is too small to accept the reducer I got from OGB. I can remove that stem and it fits perfectly but then I lose out on more than half the filtration. Guess a visit to dhgate is in my future.
BioSector
Well-Known Member
Solved my fit issue with an adapter from a LHS...
So I connected my muzzmod to the Crafty with an empty bowl, cranked it to 210 and waited. Once at temp for 15-20 seconds, I tried a quick test to see if any vapor came from the jb kwik, seemed fine after a few test pulls. Left it for a minute, still good.
Let er cool down and loaded up slightly less than my usual amount. Back up to 210 with the bong ready to go! When I slid the crafty down the air pushed some vapor out the Crafty's intake so I knew I was dealing with a very nice connection. Only downside is with the adapter I needed to use, sometimes when I pulled the Crafty away to clear the chamber, the adapter came too. New piece with straight connection in my future will put that to bed.
Holy shit, I cached the bowl in 3 hits. 3 massive hits, but no more vapor really by hit 4, lol. Through just the CU, a regular session lasts me 4-5 draws at 180C, and 3-4 more at 195C. The difference between straight GonG and the CU through a SonG adapter is night and day (no offense Ratchet, loved my SonG while I needed it).
The muzzmod hype is real folks!
So I connected my muzzmod to the Crafty with an empty bowl, cranked it to 210 and waited. Once at temp for 15-20 seconds, I tried a quick test to see if any vapor came from the jb kwik, seemed fine after a few test pulls. Left it for a minute, still good.
Let er cool down and loaded up slightly less than my usual amount. Back up to 210 with the bong ready to go! When I slid the crafty down the air pushed some vapor out the Crafty's intake so I knew I was dealing with a very nice connection. Only downside is with the adapter I needed to use, sometimes when I pulled the Crafty away to clear the chamber, the adapter came too. New piece with straight connection in my future will put that to bed.
Holy shit, I cached the bowl in 3 hits. 3 massive hits, but no more vapor really by hit 4, lol. Through just the CU, a regular session lasts me 4-5 draws at 180C, and 3-4 more at 195C. The difference between straight GonG and the CU through a SonG adapter is night and day (no offense Ratchet, loved my SonG while I needed it).
The muzzmod hype is real folks!
Last edited: