NimbusVapor
Well-Known Member
Thatw as why I hesitated too , but I ended up ordering that and the worked ball rig about a week ago , I will update when they arrive!
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
MGG
Well-Known Member
That's sick! Wish it was bigger and female joint.. sick of all these oil rigs x_x
ragnorokk
DERP
So my fab egg looks to be the "sungange" version. It looks like that one, plus it was mailed by Mr Sun, so... Seems likely. I'll double check with my homie. It's definitely not SSS, Steven, or Kathy. Maybe CCG, but I feel like the holes in mine and CCG's are a different pattern. First impressions? its pretty draggy and the cheap honey bucket it came with is not long for this life. That aside, the flavor retention is much better than I expected and the hits are very smooth. I was going to send this along to someone, but I find myself enjoying the taste and smoothness much more than expected.
NorCalBrah
Well-Known Member
The fc710 is best for flavor when it comes to dabbing.
_WaxPayne_
Well-Known Member
FC-710 works wonders with oils. So much flavor 
. Have yet to try flowers with it though.
. Have yet to try flowers with it though.
little maggie
Well-Known Member
My mini nectar just arrived today. I haven't tried it yet but there's a hole in the closed end that water comes out of. I don't know if it's a mistake or if it's designed that way. Can you point me to the picture of yours in use? My PNWT from sunshine leaks from the closed end also and I didn't expect that.
LongIslandmom
Well-Known Member
Hi guys it's been a while and I did get to Colorado to see the best experiment ever.
When I got back I broke my favorite little bubbler. I have a $20 credit at DHGATE
Does anyone have any ideas?
I tried to get the knockoff pinacle water tool from the sunshine store but it never got to me - hence the credit
So give me some ideas
When I got back I broke my favorite little bubbler. I have a $20 credit at DHGATE
Does anyone have any ideas?
I tried to get the knockoff pinacle water tool from the sunshine store but it never got to me - hence the credit
So give me some ideas
MinnBobber
Well-Known Member
.......................................................................
CO rules.......
You might get a better recommendation if you share whether you prefer:
- minimal diffusion for max flavor or
- max diffusion which bleeds off some taste but the vapor is smoother/ less harsh.
Where on that continuum ....
Trogdor
Vapinating the peasants
So there's water coming out of the mouthpiece end? you might have overfilled it, these don't hold all that much water to begin with. You can fill it a bit more when you have a high restriction set up, like an ed's tnt stem and a solo (compared to the quartz tip, it'll splash with that unless you have the water just at the slits)
Cjisohsocool
Well-Known Member
Can the mini nectar work with the arizer solo stem and tape or a grommet instead of a gong?
Last edited:
LongIslandmom
Well-Known Member
Thanks for the reply. I'm the member who has terrible throat issues and needs as smooth a vapor as possible. My throat is much better since my nodules were removed - everyone on the site was so good to me. So less harsh is best. But I want something small since I have a D020 (which I love) but isn't as portable. This would be for my azier air that I would use with my planet vape adapter. What is the FC710 that I am reading so much about?
Does this info help? Yes CO so rocked loved it
Thanks
LIMom
ragnorokk
DERP
I love my FC-710. Flavor is amazing. I don't find it irritating. Ymmv. I have several other bubblers that are much smoother, notably the FC-mini and d020-d. The FC-mini is definitely smaller/more portable, but there may be even smaller matrix perc bubblers out there. Diffusion-flavor trade off for each piece. I still use the FC-710 regularly, love that flavor. But if I hit trim run, I need diffusion.
Last edited:
little maggie
Well-Known Member
Both ends leaks. I wonder about the part that is on the top on the first and third picture and bottom on the middle one. Is that part supposed to have a small hole in it that water leaks out of? On the middle picture the water would empty out slowly. I want to use it with my air and solo.So there's water coming out of the mouthpiece end? you might have overfilled it, these don't hold all that much water to begin with. You can fill it a bit more when you have a high restriction set up, like an ed's tnt stem and a solo (compared to the quartz tip, it'll splash with that unless you have the water just at the slits)
mixchu69
Well-Known Member
Try checking out the Fc-cake. I was always interested in it.
justcametomind
Well-Known Member
@LongIslandmom as far as I read on your message, the 710 doesn't suit you well, since it's quite huge and sure less portable of the D20
Frederick McGuire
Aggressively Loungey
Isn't the FC mini the one with a built in honeybucket, and no gong joint?
Not really suitable for pairing with the air id think?
Good recommendation, it is a bit fatter than the d020, but it's certainly a jump up in diffusion.
I wouldn't really call it any more portable than the d020, but certainly very comparable, and a decent bit more diffusion.
What?
The 710 is a fairly similar size to the d020, maybe a little smaller.
It offers less diffusion, so I'd agree it's not really what @LongIslandmom is looking for, but not for portability reasons...
The closest "FC" piece I can think of that is "quite huge" is the FC-1000...
Nugg
Well-Known Member
Would the GB-194 from yinming be good for @LongIslandmom?
I don't have one but it sounds like it gives a good amount of diffusion and almost no drag. Maybe no drag will help with the sesitive throat?
It might not be the most portable piece though.
Or maybe the D020-D from Sunshinestore? Good diffusion, low drag and good price.
I don't have one but it sounds like it gives a good amount of diffusion and almost no drag. Maybe no drag will help with the sesitive throat?
It might not be the most portable piece though.
Or maybe the D020-D from Sunshinestore? Good diffusion, low drag and good price.
howie105
Well-Known Member
Not much to suggest from DHG but you might consider something like this https://www.magic-flight.com/club/bottle-rocket in function if not in form. If you have a bottle you are good to go and its east to transport. Good Luck
@LongIslandmom i think you are gonna want as much diffusion as possible to help with throat sensitivity. The FC-710 is great for dabbing and flavor, but is harsher than some of my other pieces. Possibly look into a piece with a matrix perc like the FC cake. Or maybe even a Honeycomb Perc, or a fritted perc. Maybe even a piece with 2 percs. Portability and smoothness are a really hard combo because a larger size helps smooth out the vapor. Hope this helps.
That's the dp-mini I've been working on with Steven. It should be about the same size as the fc-710, with a body style similar to the fc-mini, and a banger hanger out front instead of a joint on top. There's more info in the custom glass ideas thread, including the most recent design image.
The first sample was supposed to be finished last week- did Steven give more info on when it might be ready?
Edit, I found the mock-up image so you don't have to dig for it:
Last edited:
Man I been away from the thread for a minute... trying to catch up!
I wish the the fab section on this rig was a little bigger... it would probably help with preventing the drinking of water.
I pulled the trigger on a 9" Torus from Steven on Friday so the waiting game begins...
Side note: the guys who bought e nails, how did it turn out for you?
ragnorokk
DERP
@LongIslandmom sorry, I meant the FC-cake not mini. I saw it being sold as a mini cake bong also, got my Chinese glass search terms all confuzzled. FC-cake is relatively miniature, while still providing a large amount of diffusion.