• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Underdog Log Vapes

srama21

Monotonous Botanist
Hey guys. I snagged a 2.1mm dc car charger from my buddy who was moving the other day. I wanted to post on here and make sure the charger won't damage my dog. I am almost positive this is the charger I now have:

http://www.amazon.com/HitCar-12-Vol...40283116&sr=8-1&keywords=2.1mm+dc+car+charger

This is a 12 volt power supply, as I believe the wall unit I got with my UD is also.

I'm hoping this is sufficient, would love to take my dog for a ride!
 

srama21

Monotonous Botanist
Dropping a quote from Alan from HI. My concern with the issue Alan is raising pertains to my Econo dog. I just orderd O-rings for my econodog core. My intent is to use the O-rings on my econodog, thus giving me the ability to use my glass stems.

I get requests occasionally to provide a roasting tube stop on the outside of the Heat Island stainless steel heater cover. It has been suggested to simply use silicone o-rings to provide the tube stop. The silicone o-rings would be subject to temperatures at or exceeding its limitations. I also don't want to introduce hot silicone into the air path. Instead, I found that a 3/8" stainless steel retaining ring works perfect for a roasting tube stop. It fits perfectly into the groove from the internal tube stop.
It is now an option for anyone ordering a HI.

sshcstopring.jpg

A quick google search shows that the effective temperature range of silicone is from -65 to 450 degrees F. Are these O-rings indeed safe for use?
 

underdog

shade-tree vapor engineer
Manufacturer
Hey Dogs, we were out of town yesterday and today so have been out of touch.. should have all messages and emails answered tonight or tomorrow.


Hey guys. I snagged a 2.1mm dc car charger from my buddy who was moving the other day. I wanted to post on here and make sure the charger won't damage my dog. I am almost positive this is the charger I now have:

http://www.amazon.com/HitCar-12-Vol...40283116&sr=8-1&keywords=2.1mm+dc+car+charger

This is a 12 volt power supply, as I believe the wall unit I got with my UD is also.

I'm hoping this is sufficient, would love to take my dog for a ride!

If your Dog is the Econo-Dog I think it is then neither 2.1mm or 12v accessories will work, sorry to be the bearer of bad news. :shrug:


Dropping a quote from Alan from HI. My concern with the issue Alan is raising pertains to my Econo dog. I just orderd O-rings for my econodog core. My intent is to use the O-rings on my econodog, thus giving me the ability to use my glass stems.

A quick google search shows that the effective temperature range of silicone is from -65 to 450 degrees F. Are these O-rings indeed safe for use?

Yep, that is the temp range and yep safe for use. :tup:
 

srama21

Monotonous Botanist
My thoughts after 2 dabs in that contraption are that we should use titanium, because why not. And you can torch it clean. Also, this idea seems to be working great so far. Very very smooth. I'd rather use my underdog than an enail any day if I can keep getting great results like this.

Titanium mesh? I like this idea alot. Please keep us posted! I would like to replicate your method.
 

underdog

shade-tree vapor engineer
Manufacturer
Hey everyone, hope you're all having a good Monday so far.. busy busy busy here as usual.

We're planning a special next month (September) for our annual Birthday event and was wondering if anyone wanted to make any suggestions for what we might do?
 

Melting Pot

Sick & Twisted
Titanium mesh? I like this idea alot. Please keep us posted! I would like to replicate your method.
I use gr2 titanium coils from w9 they are for the sr71/74 Hercules
With a little manipulation they fit right in the stem,only down side is the whole in center which I took care of with S/S screen.
Hope this helps
I would post a pic I seem to of lost the ability to post pics.
 

underdog

shade-tree vapor engineer
Manufacturer
Free Dogs for everyone!!!!!! Haha

I'm joking, but seriously.... :cool:

Haha.. if I win the lottery I'll do my best to provide free Dogs for everyone. Until then I'm going to have to ask that you all keep giving me money. :cool:


In all seriousness though, does anyone have suggestions they'd like us to consider in regards to a special?
 

darkrom

Great Scott!
Hey everyone, hope you're all having a good Monday so far.. busy busy busy here as usual.

We're planning a special next month (September) for our annual Birthday event and was wondering if anyone wanted to make any suggestions for what we might do?


Concentrate stems! I feel like I'm very close with what I've done which is relatively simple. Its just about using titanium oil pads instead. W9 has titanium oil pads for the hercules that could fit.

I find oil generally works better for me medically lately, even though my tolerance for flowers is still very low. I think in the summer months my allergies get worse and vaping buds irritates my throat, and that really doesn't happen with oil at all.

I love my underdog too much to dab when I could use a special stem for convection dabs instead. Even the regular NONG pre-fit with the "right" size and distance stainless/ti mesh would be perfect as is. I think there is certainly a community who is able to help me experiment with this for some rapid results....

I'm off to test mine some more and watch last nights episode of the strain!
 

HellsWindStaff

Dharma Initiate
Hey everyone, hope you're all having a good Monday so far.. busy busy busy here as usual.

We're planning a special next month (September) for our annual Birthday event and was wondering if anyone wanted to make any suggestions for what we might do?

A birthday special drop or sale would be awesome, I am kind of in the market for a new Underdog....but in September after I pass my drug tests for work :D so I honestly couldn't ask for a more convenient time and to spend my usual medicine money + OT on something lol.
 

paytonpenn

Level 30 Nature/Healer
I'd like to see a new oil core. Not sure what to reference it as but the shielding that holds our stems and has a built in screen.

I noticed it was beyond easy to just take the Hammer nail and open up my UD and fix my Mini's issue. If a core without a screen is possible we could get a inner core glass stem with a capped bottom to hold the oil. Partnered with some new glass carbed stems. Hopefully also possible, new Ti+SS tips also bearing capped bottoms and carbed nylon stems.
 
Last edited:

Dafni

Well-Known Member
My thoughts after 2 dabs in that contraption are that we should use titanium, because why not. And you can torch it clean. Also, this idea seems to be working great so far. Very very smooth. I'd rather use my underdog than an enail any day if I can keep getting great results like this.

I do the same with gold pads, make them myself. Works even better than Ti (no oxidation when torchend and a niiiice heat conductivity to vape everything out of the pad)
I use a HI myself, but I guess it works the same on a UD.
 

WoodVillain

Backwoods Rated
Just look at how awesomeness!!! :rockon:


Camouflage :haw:










This big bad boy turned out wonderful!!! Looks gorgeous and can hold a few loaded stems and some ground herb in the bottom for refilling the stems in the middle of a session!!

Thanks again to the UD team for making this a reality for me!! I know it was an unusual request, but you guys knocked it out the park as usual!
 

underdog

shade-tree vapor engineer
Manufacturer
I loved the special exotic minis that you did for 4/20. I'd buy a million of those things in every different wood. I got the walnut bullet and I love the unique shape/premium wood grain. It's tiny but might be the one I show off the most.

That's a possibility, thanks!


Double stems pushed me the last time.
Twigs fer a hundred make me pause.

I think the double stems promo was definitely popular maybe we can do something like that again. Not sure if we could get down all the way to $100 but will definitely have some lower than normal priced Dogs. Thanks!


I wouldn't have any specific suggestions regarding vapes but something on stems and other accessories would be pretty good

We should hopefully have some stem and accessory deals, thanks for the suggestion.


Concentrate stems! I feel like I'm very close with what I've done which is relatively simple. Its just about using titanium oil pads instead. W9 has titanium oil pads for the hercules that could fit.

I find oil generally works better for me medically lately, even though my tolerance for flowers is still very low. I think in the summer months my allergies get worse and vaping buds irritates my throat, and that really doesn't happen with oil at all.

I love my underdog too much to dab when I could use a special stem for convection dabs instead. Even the regular NONG pre-fit with the "right" size and distance stainless/ti mesh would be perfect as is. I think there is certainly a community who is able to help me experiment with this for some rapid results....

I'm off to test mine some more and watch last nights episode of the strain!

Do pads like that exist without the center hole? I don't have much experience in this area so I rely on you guys for education and suggestions. :science:


A birthday special drop or sale would be awesome, I am kind of in the market for a new Underdog....but in September after I pass my drug tests for work :D so I honestly couldn't ask for a more convenient time and to spend my usual medicine money + OT on something lol.

A sale there definitely will be.. a (mass)drop not likely. I'm sure we'll have plenty of stuff to inspire you to spend your money. :brow:


I'd like to see a new oil core. Not sure what to reference it as but the shielding that holds our stems and has a built in screen.

I noticed it was beyond easy to just take the Hammer nail and open up my UD and fix my Mini's issue. If a core without a screen is possible we could get a inner core glass stem with a capped bottom to hold the oil. Partnered with some new glass carbed stems. Hopefully also possible, new Ti+SS tips also bearing capped bottoms and carbed nylon stems.

Thanks for the suggestion Payton. Can you send me a PM and explain in a little more detail what you mean for this inexperienced Dog? :tup:


Just look at how awesomeness!!! :rockon:

Camouflage :haw:







This big bad boy turned out wonderful!!! Looks gorgeous and can hold a few loaded stems and some ground herb in the bottom for refilling the stems in the middle of a session!!

Thanks again to the UD team for making this a reality for me!! I know it was an unusual request, but you guys knocked it out the park as usual!

Awesome man! Glad you like it and it looks like a good match for the rest of your stuff too. That's one nice slab of Buckeye you have there as well!
 

darkrom

Great Scott!
Top Bottom