Discontinued The Grasshopper

Wolf46 · Aug 20, 2015

Pipes said:
I would highly expect you would receive with your unit. If not, these look like a good alternative.
For the buck and change for 10, might be good to have anyway? They look like they will extend the vapor path to boot.

thanks, maybe i send an email to the grasshopper people in order to be 100% certain (i dont wanna buy another silicone tip if i already have one in the box)

another silly question, the actual grasshopper in their site is stil a some sort of beta unit or is the final model with the new screen and the ticker charge cable (and other fix)?!?

thanks guys!

sundaddy · Aug 20, 2015

a nice sleeve for the GH should it become too warm.

zymos · Aug 20, 2015

rizzo said:
Haven't been on this thread forever,still waiting for my grasshopper from kickstarter . Does there website indicate where they are in shipping out to their supporters in order I get their email updates put as years roll by I have no idea on timeline now. I forgot my order number etc .Lol adrenalin burned off a long time ago. Seems like it might pan out eventually and show up in mail

You are going to be waiting even longer than everyone else if your grasshopper is from Kickstarter.
(Cause it's actually IndieGogo.)
If you log into their site, it will show an estimated shipping date. These were mostly updated a couple of weeks ago, but should be taken with a large grain of salt.

atadvice · Aug 20, 2015

Hi guys,

I've had the Grasshopper for a couple days now and have been using it for 5-6 bowls per day. I'm not going to write a super detailed review but below are a couple points that really stand out to me:

I use the vape with temperature stepping (i.e. take a hit on level 1, up the temp to 2, take a hit and so on). I'm genuinely impressed at how long a bowl lasts me. I get a good 2 puffs on each temperature level. Averaging 8-9 healthy draws per bowl.
Water-pipe usability: I used to love bong tokes but hated how they felt and how bad they were for my lungs. The grasshopper can attach to essentially any bong (and any bowl) right out of the box with the silicon tip. I have had buddies who are bong smokers only get huge milky rips out of the GH... it also really cools down the vapor and the clouds are oddly satisfying (EDIT: Want to make a note that this was not a selling point for me, I decided to try it out in a bong with my friends and immediately fell in love - I purchased some cheap $30 glass that is now vape only )
Loading really is tough. I'm coming from vaporizers like the Crafty, Pax and Volcano. I'm genuinely having trouble loading this unit up. The width of the chamber is a lot smaller than I thought and I have a lot of spillage loading it up. (I have very skinny fingers and still find it tough) Scooping works great but for a brand new device... really don't want any scratches!
Emptying the unit required a paperclip or a poke. Just shaking the unit and slightly hitting the side doesn't unlodge all the ABV for me. This may be because i'm loading it too tightly, hitting it too long, finely ground but etc. so YMMV

Overall, I love this thing. It's right up there with my Crafty as a daily use vaporizer and can't wait to test it out at a festival this weekend. I'm happy to answer any questions if you got 'em

jojo0420 · Aug 20, 2015

I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40. :science:

Highlight: Finish a whole load in two hits.

EmDeemo · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

Marvelous, thanks.

Very familiar 'uuuuuuurgh' sound on that second hit there my friend :-)

PeteSeattle · Aug 20, 2015

jojo0420 said:
The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

Thanks for the update for us waiting on our Ti versions! Very impressed.

CharlieBelmont · Aug 20, 2015

Thanks jojo i've been wanting to see that.

Uzer · Aug 20, 2015

atadvice said:
Loading really is tough.

Is it possible to use the tip piece as a little scoop when it's detached? Then "spoon" the material in to the chamber?

YaFreekin Right · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

Very impressive. Looks like it could unseat or at least equal the top desktops vapes on cloud production, certainly for the $$.

atadvice · Aug 20, 2015

Uzer said:
Is it possible to use the tip piece as a little scoop when it's detached? Then "spoon" the material in to the chamber?

Definitely possible but I dont think I would recommend it. Theres a screen in the cap and I wouldn't want anything to happen to it!

Old School · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

OMG.... that was the absolute BOMB...... OMG

can you tell me how many times you can do that on a single charged battery..... it looked as though you had already done 4 of them would it go another 4 more or not quite..?

Snappo · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

Grasshopper didn't really milk your glass ... :shrug:

IT CREAMED It!!!!! :rockon:

jojo0420 · Aug 20, 2015

Old School said:
OMG.... that was the absolute BOMB...... OMG

can you tell me how many times you can do that on a single charged battery..... it looked as though you had already done 4 of them would it go another 4 more or not quite..?

That's a good question, and I wish I had an answer for you. I'm not sure....
I may have swapped batteries between takes, 1 battery will do both loads plus more though.
More research is required.

sundaddy · Aug 20, 2015

Awesomeness! Quite the extraction.

VoodooChild · Aug 20, 2015

Holy shit Jojo wicked video! Keep your feet on the ground with your head in the clouds

marduk · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

I think you just sold a few more Grasshoppers.

Here's a still shot of the cream for people short on time.

Vapetrees · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

Damn dude you took some huge ass rips! I couldn't believe you were going to attempt to finish that much that fast. That cough after the hits, too familiar. Damn! Lol :bowdown:

sasNW · Aug 20, 2015

After that video I really want a gray ti model... And some better lungs! Holy hell that was a fat hit!

Has anyone brought up if the anodized ti will be more prone to scratching? And if it can scratch off? So hard to keep up with this thread, and thanks for that video

skyvaper · Aug 20, 2015

@jojo0420 I will hopefully be done coughing from YOUR video when I get my GH.

nikcorda · Aug 20, 2015

damn @jojo0420 im loving these videos!! restoring my faith slowly but surely!

PAZ · Aug 20, 2015

Kind of a random question, does anyone have the dimension of the mouthpiece intake hole?

sundaddy · Aug 20, 2015

If it's colored with electrical current, I would think the color would be all the way through.

Likes2vape · Aug 20, 2015

jojo0420 said:
I've put together another video.

A few more comments, more clouds.

The real cloud chasers will want to pay attention to the part starting around 4:40.

Highlight: Finish a whole load in two hits.

Fucking awesome!!! Thanks mang!! :spliff:

zymos · Aug 21, 2015

sundaddy said:
If it's colored with electrical current, I would think the color would be all the way through.

Nope, it's just a layer of oxidation on the surface.

https://en.m.wikipedia.org/wiki/Anodized

Discontinued The Grasshopper

Vapor War Team Cap

Well-Known Member

Well-Known Member

Member

Cloud Chaser

ACCOUNT INACTIVE

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Vape13man

Caveat Emptor - "A Billion People Can Be Wrong!"

Cloud Chaser

Well-Known Member

All Along The Vapetower

daydreamer

Vaped Out

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member