Cheap High Quality Bubbler

LittleM17 said:

what do you guys think would be better for flower/oil ? the ccg egg or ccg d cycler?

Click to expand...

gaseous_clay said:

I think I may have to get one of those D-cycler. Anybody have one?

Click to expand...

Smokey the Bearington said:

Can anyone recommend the best fab egg? It's been out for a while and I don't think anyone has come to a conclusion as far as the best quality egg.

Click to expand...

I ordered the CCG D-Cycler and CCG Fab Egg last month, shipping took about 12 days to get to So-Cal. I only dab oils and both the D-Cycler and Fab egg work fantastic.

As for oil or flower, I would't put flower through either of these, too small and hard to clean. The egg is smaller than it appears, remember it is basically just two pane glass in the shape of an egg, the hollow center takes up all that space. Both the D-Cycler and Egg share small volume characteristics making them both great for flavor retention of oil. I guess I would lean towards the D-Cycler having the better flavor, I certainly use it the most, its my new daily driver. However I think the biggest factor in flavor is getting the temperature right, they both taste amazing when I use a laser thermometer to get the temp perfect. I was gonna buy a FC-710 and maybe the new 9 inch Torus from Steve next, but I'm thinking the money might be better spent on an e-nail. As dab performance goes I think I'll be more happy and get more flavor with controlled temps than a new rig. Even if it is the super hyped FC-710.

I did a lot of research before getting my egg, it seems the two most reputable eggs are kathys and ccg's, but kathy's are ugly designs imo, the long length joint on her newest one is atrocious. I would go with CCG again if I ordered another one. The quality of the egg isnt perfect, but its really good. The joint is a little crooked and the swiss perc holes are not all perfectly spaced but those minor imperfections can be expected, its probably the hardest production glass piece to make,and its only 58 dollars.

I’ve wanted a bubbler with a detachable mouthpiece for awhile now, and finally ordered the FC-UFO last month. I thought it might replace my jhanpixel UFO, but I prefer the jhanpixel with its slimmer can, bigger mouthpiece, and fewer slits. Still very much looking forward to breaking out the FC-UFO with whip in a group though.

Anyway, my order timeline:
7/11 - ordered
7/22 - arrived with hole in weld, I contact Jane with pics, and she says they’ll send out a replacement
7/31 - replacement shipped
8/11 - replacement received



First one is on the left. That one appears to be the V2, while the replacement looks like the V1. Doesn’t bother me at all, but might be worth mentioning to Jane if anyone finds themselves in the same situation. This was my first order with Steven and also my first dhgate order with any problems. While they handled it fine, it was enough of a hassle that it’d take a really tempting piece for me to order from Steven again.

Came across these this AM...interesting but too pricey for me ATM...


http://www.dhgate.com/product/high-quality-microscope-form-14-quot-inches/251405726.html


CHeers

Dangus said:

Came across these this AM...interesting but too pricey for me ATM...

http://www.dhgate.com/product/high-quality-microscope-form-14-quot-inches/251405726.html


CHeers

Click to expand...

that looks sick, i dont even understand how that functions though, seems like the bottom chamber would need a LOT of water and wouldn't you just end up sucking it all up into the top chamber? idek. needs function vid asap.

Ratchett said:

http://fuckcombustion.com/search/25806903/?q=D-cycler&t=post&o=date&c[thread]=5255

Lol, sometimes a quick search will give you everything you need to know - look at how much discussion there's been about the D-cycler.

I'd already have one but it has a damn male instead of a female joint!

Click to expand...

Yep! A ton of D-Cycler discussion here. I enjoy mine quite a bit. 14F to 18F adapter handles the 14mm male joint issue well. They can be had from China, but I really like everything I get from OregonGlassBlower. Here's his.

Made a slow motion video of the FC-710 but it was hard taking the dab and holding the phone .

@yps790

What are you going to use it for/with? Are you looking to have just one rig for vaping flowers, doing dabs, and combusting when you lose your way? these facts go a long way when it comes to recommendations.

Personally, I'm a little put off by Stephen's track record on here. Sending out such poor, inconsistent work doesn't inspire a lot of confidence in me, regardless of what he's capable of. Plus, he's quite a bit more than most store's prices. I had a crap piece sent from Yingmin5, but they have shipped another, supposedly handpicked replacement. Will update when it arrives.

MGG said:

that looks sick, i dont even understand how that functions though, seems like the bottom chamber would need a LOT of water and wouldn't you just end up sucking it all up into the top chamber? idek. needs function vid asap.

Click to expand...

Looks like they are trying to copy Erik Anders microscpoe but his is a recycler and much better looking.

HyzerSoze said:

@yps790

What are you going to use it for/with? Are you looking to have just one rig for vaping flowers, doing dabs, and combusting when you lose your way? these facts go a long way when it comes to recommendations.

Personally, I'm a little put off by Stephen's track record on here. Sending out such poor, inconsistent work doesn't inspire a lot of confidence in me, regardless of what he's capable of. Plus, he's quite a bit more than most store's prices. I had a crap piece sent from Yingmin5, but they have shipped another, supposedly handpicked replacement. Will update when it arrives.

Click to expand...

That's a fair assessment, but I'd like to reiterate that I had a really good CS experience with Steven and received semi-functional items from SSS who has a great rep here. Order from China and roll the dice. Sometimes you're winning big w/ a rip of a $1k piece, sometimes you look at your "outbox" of glass and sigh as you flop another into the bin.

I will be using both for oils; with a enail?



should I get Dhgate, (GB-194-1) from yingmin5

Ugh am stuck... or...
Dhgate, (FC-186) from stevelmz79

can anyone chime in on these "painted" chinese rigs?? it seems people dont give af their glass is painted with fluorescent chemicals

I don't think there are actually that many painted rigs out there (though they do exist). My advice to anyone interested in a rig that is potentially painted would be to message the vendor and ask. If they say it isn't then go ahead and order, and if it is painted then just file a dispute and screencap your messages with the vendor saying it wasn't painted.

mrgohamilton said:

can anyone chime in on these "painted" chinese rigs?? it seems people dont give af their glass is painted with fluorescent chemicals

Click to expand...

Literally every mention I see of the painted rigs in this thread is negative - or are you referring to non-FC members not giving a fuck about the paint?


But yeah, I'd say they're probably safe, but really not worth the potential risk Imo.

yps790 said:

I will be using both for oils; with a enail?



should I get Dhgate, (GB-194-1) from yingmin5

Ugh am stuck... or...
Dhgate, (FC-186) from stevelmz79

Click to expand...

I own both and have used an e-nail with each of them. Filtration level is about the same but the FC-186 has a much larger volume and requires a bit of pull. The GB-194-1 has a much smaller volume (good for dabs) and there's no restriction when you pull on it, like as if you forgot to put water in it. The FC-186 is now relegated mostly to occasional EVO use and the GB-194-1 is one of the main pieces in my rotation for use with my e-nail. The other pieces are the FC-710, CNMeng 9" clear Fab Egg, CCG D-Cycler.

In case you need more convincing the GB-194-1, maybe @BoogerMan can lend some insight.

Monsoon said:

I own both and have used an e-nail with each of them. Filtration level is about the same but the FC-186 has a much larger volume and requires a bit of pull. The GB-194-1 has a much smaller volume (good for dabs) and there's no restriction when you pull on it, like as if you forgot to put water in it. The FC-186 is now relegated mostly to occasional EVO use and the GB-194-1 is one of the main pieces in my rotation for use with my e-nail. The other pieces are the FC-710, CNMeng 9" clear Fab Egg, CCG D-Cycler.

In case you need more convincing the GB-194-1, maybe @BoogerMan can lend some insight.

Click to expand...

does the fc710 balance well with an enail on it? i just ordered mine and was wondering

Edit: i also have a dropdown

LittleM17 said:

does the fc710 balance well with an enail on it? i just ordered mine and was wondering

Edit: i also have a dropdown

Click to expand...

zero issues. i haven't tried it without water tho

Looks very much like vapefiend have gone and got themselves a whole bunch of FC-186's and calling it a Bomb Tower Bubbler:



https://www.vapefiend.co.uk/bomb-tower-bubbler.html

To be fair they haven't put TOO much mark up on the price considering you usually get stuff next day from them here in the UK

Edit: on second look maybe the mouthpieces are different

Gray Area said:

Looks very much like vapefiend have gone and got themselves a whole bunch of FC-186's and calling it a Bomb Tower Bubbler:

https://www.vapefiend.co.uk/bomb-tower-bubbler.html

To be fair they haven't put TOO much mark up on the price considering you usually get stuff next day from them here in the UK

Edit: on second look maybe the mouthpieces are different

Click to expand...

Fc 200



http://www.dhgate.com/store/product/mobius-stereo-matrix-2015-new-34cm-heights/245686309.html

Wow that's defiantly not it lol

Been Vapin said:

Fc 200



http://www.dhgate.com/store/product/mobius-stereo-matrix-2015-new-34cm-heights/245686309.html

Wow that's defiantly not it lol

Click to expand...

The FC-200 is the angled straight neck stereo matrix.
The FC-186 is the bent neck stereo matrix.

I was kinda surprised when the 200 came out, as I had seen no discussion of wanting the neck changed, and it's really a pretty minor change aside from that.

My guess is that it's easier to attach a straight tube at an angle than to bend a tube, so the FC-200 is cheaper for them to produce...

I personally prefer the bent neck 186...
But I haven't seen a 200 in person

LittleM17 said:

does the fc710 balance well with an enail on it? i just ordered mine and was wondering

Edit: i also have a dropdown

Click to expand...

The best way to describe it is that with or without a dropdown it will knock over more easily only if you physically hit it.

does anyone have a gordo scientific knockoff they have done water tests with? Ive only found one video on youtube and you can tell he doesn't have enough water in it

I recently broke my DH gate cherry and purchased the FC-710. No need for a review as what all the others have said is true. If you dab, have 40 bucks and want the best little flavor savor, get it. This post is for the CCG Hitman glass sundae stacker. I got it in the mail yesterday after ordering on 7/31. The glass is super thick and the welds look good. It hits good too not too much drag. Not as much flavor as the 710 but that's going to be hard to beat. The packaging was great and I would feel confident in ordering from them again.
Imgur Album -http://imgur.com/a/k9OBm

Is the 710 mainly well regarded for dabs, or would it be good for vaping too?

emmdeemo said:

Is the 710 mainly well regarded for dabs, or would it be good for vaping too?

Click to expand...

Gimme a few days and I'll let you know, I've got a 710 en route to my house right now
(I don't dab, so I'm using it for flowers exclusively)

Ratchett said:

Gimme a few days and I'll let you know, I've got a 710 en route to my house right now
(I don't dab, so I'm using it for flowers exclusively)

Click to expand...

Can't wait to find out your results. My only complaint about the FC-710 (barely a complaint even) is how absurdly loud it is. Everyone on your block knows when you hit that thing the sound grew on my fast, but the volume was definitely surprising