Oregonglassblower (mike) Custom Glass Adapters and Accessories

alltoreup

alltoreup

Damn you, party liquor
I recently had Mike make a custom mouthpiece for my Colie gridded upline and he nailed exactly what I was looking for. I wanted a MP that you simply put your mouth against. Not in or around. Not an easy thing to find. I also wanted it long enough to where you can hit it and watch it at the same time. It ended up being perfect bar height.
Thanks again, Mike!!
jsdljm.jpg



Obligatory milk shot

287nr60.jpg
 
Oregonglassblower

Oregonglassblower

Well-Known Member
Glass Blower
carlosod said:
cut and paste this from the YouTube field:

Drew up a couple sketches and Mike was able to create this piece. Maintains airflow and clears tube perfectly with no more redraw from the evo itself. easily a must have for drastically improved pulls, safety and convenience.

Male 14mm plug is the carb stopper in a standard 14mm female joint. When I need to change elbs or end my session I unplug the adapter and seat it right on the hydrafoot. Simple!


Thanks Mike!

oregonglassblower.com
fuckcombustion.com
vapexhale.com

11216209_846656132069219_1250406794490388290_o.jpg
Click to expand...
Being getting some requests for these so i thought i would post a link to make it easier. I can customize them to any size.
http://oregonglassblower.com/Carbed-Glass-Vape-Adapter-18fvc.htm
 
Snappo

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Jaindoh

Jaindoh

Well-Known Member
I'm a repeat customer of Mike's for years now, through his ioffer storefront. Always got my downstems from him. Both the 12-slot (low drag) and 12-hole (high diffusion) are great! Prices and quality both through the roof, which I appreciate a ton!
 
MinnBobber

MinnBobber

Well-Known Member
broken_sound said:
I'm about to pick up an adapter with a carb, would this:
http://oregonglassblower.com/18-14mm-Glass-Adapter-With-10mm-Carb-18M-14F-18-14-10c.htm

Fit into my current setup of:
http://www.dhgate.com/product/2015-new-glass-faberge-egg-mothership-water/238488989.html
+
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-65#post-736263
Click to expand...
.................................................

That should work as starting at the Crafty with welded on 18 - 14 mm male joint:

Then OGB 14 mm Female intake to 18 mm Male:

Fab egg with 18 Female

FYI, @Oregonglassblower pieces are very nicely done
 
61reissue

61reissue

Well-Known Member
alltoreup said:
I recently had Mike make a custom mouthpiece for my Colie gridded upline and he nailed exactly what I was looking for. I wanted a MP that you simply put your mouth against. Not in or around. Not an easy thing to find. I also wanted it long enough to where you can hit it and watch it at the same time. It ended up being perfect bar height.
Thanks again, Mike!!
jsdljm.jpg



Obligatory milk shot

287nr60.jpg
Click to expand...

Awesome! Well except for the Saints part(Falcons Fan)
 
ragnorak71

ragnorak71

Well-Known Member
mike made me a replacement much longer mouthpiece ending in a 18mm male joint for my dhgate ufo piece and it is awesome, also grabbed a carbed adaptor and is still the best value for me in uk
 
MinnBobber

MinnBobber

Well-Known Member
Here's my newest collection of @Oregonglassblower glass. Very nice job on them.
They allow a lot of experimenting/ coming up with different options.

- mouthpieces: Mike can tweak the length, bend angle, mouthpiece for a custom fit.
- the glass adapters with different angles allow for different options
- the tubing/ whip adapters let you connect to any joint (come in M or Female)

Oregon%20glss%202.jpg
 
cybrguy

cybrguy

Putin is a War Criminal
One of those mouthpiece stems with a US male joint (to fit Venus) is in my future. I wonder if he can do them without reducing the diameter so much? I will probably have him start the bend a little lower to get the piece I am connecting it to (like the UFO) a little further from my face. I think a lower bend may allow more surface to absorb heat (for using with the Zion).
I KNEW I shoulda taken that thermodynamics class in school... ;)
 
ragnorak71

ragnorak71

Well-Known Member
I got him to do a mouthpiece for my ufo so i could see it easier. at first i was alarmed by diameter (looked like a drinking straw lol) but now I am used to it and really enjoy it. i got him to do the bend just above the gg joint (just under an inch) works fine
 
cybrguy

cybrguy

Putin is a War Criminal
ragnorak71 said:
I got him to do a mouthpiece for my ufo so i could see it easier. at first i was alarmed by diameter (looked like a drinking straw lol) but now I am used to it and really enjoy it. i got him to do the bend just above the gg joint (just under an inch) works fine
Click to expand...
Do you have a pic of that? I'd like to see how far it gets you away from the UFO.
 
cybrguy,
  • Like
Reactions: Snappo
ragnorak71

ragnorak71

Well-Known Member
no pics i am afraid since i have broken nearly all technology near me this week (dont ask)

i came at it from what height i wanted the mp to sit so i knew i wanted a 7 inch height gain, the whole thing is 9inches from the ufo when inserted (insert puns here)

i am a big fan of it have to say, using it atm
 
ragnorak71

ragnorak71

Well-Known Member
just to clarify, my comments were by no means critical. the diameter of the tubing is obvious in the pics you sent prior Mike and it was just my lack of thought that led to the moment

my biggest plus is you give exactly what is asked for, top service
 
cybrguy

cybrguy

Putin is a War Criminal
ragnorak71 said:
my biggest plus is you give exactly what is asked for, top service
Click to expand...
I need to reinforce this thought. You may have read about my joint issue (ISO vs US) that was no fault of OGB, but many vendors would have left me hanging or just offered a refund (or not). Mike went WAY out of his way to make sure I was happy and my issue was resolved and I had what I needed.

There is NOTHING better as a customer than a vendor who cares about customer satisfaction, and Mike does this in a big way. I can't recommend him more highly.
 
XeroRespect

XeroRespect

This too shall PAX...
Honestly, anything I have thought up, Mike was able to improve on. Does great with the custom orders, and the ground joints are top notch. I just placed my third or fourth custom order today. Quality, fair price, quick shipping and best of all made in the USA.
 
CameraNerd

CameraNerd

Well-Known Member
Im sorry if this is the second time this has been requested...but could you make me an adapter that is a U. one with a male 14 that ends up the width of a drip tip? id like to use it with my cloupor setup.
 
CameraNerd,
  • Like
Reactions: Snappo
XeroRespect

XeroRespect

This too shall PAX...
I had @Oregonglassblower make me a custom setup for my Magic Flight Orbiter/Underdog. I wanted a nicer mouthpiece for the whip, and the carbed adapter was a must. I am loving the 10mm plug style. The 14mm Male vape adapter with a shortened stem makes for a flexible hookup. Well done Mike. Excellent work as always. The flat mouthpiece works awesome. Love the 'sip' feeling.

dr9xdz.jpg
 
You must log in or register to reply here.
Top Bottom