Cheap High Quality Bubbler

Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
NickDlow said:
I think hymanquartz. I'll give u these, like I said they don't fit my Errlectric and I was ready to break all three lol.
Click to expand...
I appreciate it, but i honestly have no use for them. I've never dabbed off a nail period until yesterday and that was a friend's SmartDabb Electric nail. A torch just screams a fuck no for me, LOL. My friends SmartDabb was up high in my opinion and he tried to kill me with a huge dab. I took the dab but GOD it was harsh to my chest cavity. I dab daily with my EVO, but it's like vaping vs smoking when compared to hitting that "SmartDabb" What do you think it was?The temp perhaps? Or just to much crumble? Are You familiar with the SmartDabb? If so is it BS compared to MR EEERRL?
 
NickDlow

NickDlow

Log Hog
Cannabis Connoisseur said:
I appreciate it, but i honestly have no use for them. I've never dabbed off a nail period until yesterday and that was a friend's SmartDabb Electric nail. A torch just screams a fuck no for me, LOL. My friends SmartDabb was up high in my opinion and he tried to kill me with a huge dab. I took the dab but GOD it was harsh to my chest cavity. I dab daily with my EVO, but it's like vaping vs smoking when compared to hitting that "SmartDabb" What do you think it was?The temp perhaps? Or just to much crumble? Are You familiar with the SmartDabb? If so is it BS compared to MR EEERRL?
Click to expand...

Well these bangers are for an enail, just not mine. I think their OD is 16mm so if ur buddy has a 16mm coil or if u get one u can use them. The little glass piece sticking out is a support for a coil.

But my Errlectric is my first and last enail. I don't have any experience with any other company nor do I have the desire lol.

But the harshness could be temp or quality of the material. I'd probably say temp. I use 480f-550f on my Ti I add 100f for the banger to compensate for the heat transfer.
 
ataxian

ataxian

PALE BLUE DOT
weenstoned said:
I don't really fault people, but it reminds me of how everyone used to badmouth Asian cars as being inferior then gradually they were acknowledged as equal/superior. Also most of the other products you use throughout your day probably won't be made in America unless you have really made a point of doing that.

I can see the point of buying American glass to get a unique piece of art, but a nail just seems like a tool to me.
Click to expand...
Comparing a Asian car to a European caŕ?

What are you smoking ?
 
T

tstar

Member
Cannabis Connoisseur said:
I appreciate it, but i honestly have no use for them. I've never dabbed off a nail period until yesterday and that was a friend's SmartDabb Electric nail. A torch just screams a fuck no for me, LOL. My friends SmartDabb was up high in my opinion and he tried to kill me with a huge dab. I took the dab but GOD it was harsh to my chest cavity. I dab daily with my EVO, but it's like vaping vs smoking when compared to hitting that "SmartDabb" What do you think it was?The temp perhaps? Or just to much crumble? Are You familiar with the SmartDabb? If so is it BS compared to MR EEERRL?
Click to expand...

The harshness probably has to do with the higher temperature and a bit of the dab size too. Ask him to lower the temp to around 680-710 to stay in the low temp range, might be more of your liking but more smoke to clear.

I've never used a Smart Dab but have used many others e nails. They all do the same thing (given you have a digital PID of some sort instead of analog). They all turn on draw electricity to heat up the coil to desired temp. I personally use a High 5 vape e nail and love it. I don't see myself ever paying more than $150 for a full e nail set up. So I guess to answer your question it depends on who you ask but I'd say no it's not BS since it most likely does the same thing. The only thing that I'd say might BS is the price of either unit.
 
tstar,
MilkyMondays

MilkyMondays

Well-Known Member
Monsoon said:
Not sure what to make of this, guess it's what happens when non-cannabis consumers design glass pieces. The only possible use I can see for it would be a dual hose for 2 people to hit but that's it.


Click to expand...
Its the Pulse glass rig/ashcatcher knockoff. Pretty cool, way too big.
 
MilkyMondays,
Dangus

Dangus

Yeah, well, that's just, like, your opinion, man.
Noticed this on my morning peruse...A bit different take vs the Yingmin version

nectar-collectors-bong-recycler-water-pipes.jpg

http://www.dhgate.com/product/nectar-collectors-bong-recycler-water-pipes/249261115.html
 
ragnorokk

ragnorokk

DERP
Dangus said:
Noticed this on my morning peruse...A bit different take vs the Yingmin version

nectar-collectors-bong-recycler-water-pipes.jpg

http://www.dhgate.com/product/nectar-collectors-bong-recycler-water-pipes/249261115.html
Click to expand...
Good lookin out, brosef! I'm still contemplating one of these, and the base looks kind of nice. It's odd that it's got volume, like you could add water, but I see no perc. Good to know there are people making a few stands that also convert it to a bong/bubbler for home use.

NickDlow said:
Well here it is. I had six nails laid out 3 "Quartz" bangers from hyman I believe and 3 random glass nails that came with dhgate pieces. I didn't even up testing them. One cuz there was no point, you'll see. Two I was heating it then dropped it like a dumb ass. In my defense I had a long night at work and just vaped so I'm all thumbs. If u want to see me do them let me know.


I did 2 different bangers but figured one was enough for the video seeing I don't know shit about editing.
Click to expand...
Thanks for sciencing that up for us, nice video
 
Last edited:
ragnorokk,
ic3cold

ic3cold

Member
NickDlow said:
I think hymanquartz. I'll give u these, like I said they don't fit my Errlectric and I was ready to break all three lol.
Click to expand...

If you still have the bangers up for grabs I could use them. I have a 14 mm male joint rig and getting a 16 mm coil. Let me know and Ill gladly pay for shipping.
 
ic3cold,
_WaxPayne_

_WaxPayne_

Well-Known Member
Got the Gordo and FC-710 and some nails.

etsmzs.jpg





The nails I havent even seasoned yet but the cups are thick as hell. Still a little hesitant but I'll give them a try .
212yeiw.jpg


The Gordo takes a hefty amount of water and lung power to get decent vortex. It was alot better than I'd expected aesthetically although the glass on the mouth piece looks a little thin. The perc is unfortunately NOT gridded ...even though hfy_glass claim it is on their site...its not. Not only that its a little uneven in some slits . They really need to learn more about percolators over there and proper terminology. all in all it isnt bad and I'm sure it'll grow on me more once I figure out the right water levels. 7/10 for form factor and price. function still needs a little work and perc could have been better.

2coss5t.jpg


The FC-710... WOW!!!! This is such a home-fucking-run!!!!! :rockon: I seriously cannot thank all of you who suggested it enough!! It is soooo flavorful and also unique. Its amazing how smooth a hit this prodcues while also maintaing the flavor. It became my go-to dab rig after the first hit ! :love: I love hearing the water rise thru the bottom of the ball and out of the top spout . I cant even imagine letting this one go or breaking it. Might order two more just in case or will wait for the 18mm female version. Again thank you FC community , you guys really know how to pick em :science: 11/10 value, function and simplicity .

5drkec.jpg






Sorry for pics only for now. I dont have YT account but I can try to make some gifs or something since I use my phone for all my pics .
 
rakka

rakka

Vaped
ataxian said:
Comparing a Asian car to a European caŕ?

What are you smoking ?
Click to expand...

He might be smoking common knowledge or at least common opinion?

Cars designed and manufactured in Japan (and products in general) for a while now, decades even, have been considered among of the most well-made and reliable in the world.

Have you been living under a rock ? ;)

Though he used the more broad term "Asian" so I guess it's not totally accurate and it certainly doesn't apply to anything that's made in China these days especially cars, but my point still stands.
 
Last edited:
rakka,
  • Like
Reactions: ataxian
A1FBG

A1FBG

Active Member
Its not a bubbler. But my FC200 came in today and its quality. Looks A+ and functions great too. I love the mouthpiece. Fits perfectly. The bottom matrix perc looks larger/wider than the top, but it does not effect function in any way. It has less slits than an official stereo matrix but it was a better deal for me as i dont need all that diffusion for vapor plus its at a very discounted price
 
Frederick McGuire

Frederick McGuire

Aggressively Loungey
A1FBG said:
Its not a bubbler. But my FC200 came in today and its quality. Looks A+ and functions great too. I love the mouthpiece. Fits perfectly. The bottom matrix perc looks larger/wider than the top, but it does not effect function in any way. It has less slits than an official stereo matrix but it was a better deal for me as i dont need all that diffusion for vapor plus its at a very discounted price
Click to expand...
I think the "bubbler" requirement went out the window pretty early in the thread :lol:
 
Stu

Stu

Maconheiro
Staff member
This is the cheap glass thread, guys. Not a thread to discuss imported cars. If you would like to discuss the topic further, feel free to make a thread in the lounge, or take it to PM.

Thanks.

:peace:
 
Stu,
rakka

rakka

Vaped
^ Apologies stu.

Anyway. This thing is a beast--surprisingly even with the Solo's restriction. First one came with a broken base, great communication from Steven/Jane and they shipped a replacement which came with far better packaging and (yay!) a fragile sticker or two :)

Very well made, my first Steven piece. Massive base, sturdy with no unevenness whatsoever. (I've had some china pieces come with wobbly bases, it's annoying) Great welds, everything's straight, functions perfect. Absolutely huge hits :D

Many thanks to members like @Frederick McGuire and @Nugg who recommended the FC1000. Awesome larger piece, gets my vote too; it's gonna be in regular rotation. And yeah, I think they're sticking with the v1 design.

Now that the FC1000 and D020-D have filled my big/small glass needs it's time to find a medium sized bubbler/bong for the Solo. Admittedly the 1000 is a touch big when it comes to cleaning which shouldn't be an issue but I like to clean after every use so if its a DD i'm worried it might break.

I'm thinking of going Steven again haha. Seriously impressed. Only thing I can fault is the wait time >_<

 
Last edited:
4

4tokin

Well-Known Member
ataxian said:
Comparing a Asian car to a European caŕ?

What are you smoking ?
Click to expand...

Stu said:
This is the cheap glass thread, guys. Not a thread to discuss imported cars. If you would like to discuss the topic further, feel free to make a thread in the lounge, or take it to PM.

Thanks.

:peace:
Click to expand...

I got his point, its more about the country of origin and peoples perceptions of quality. Which constantly gets kicked around this thread.

I wish my german vehicle had the reliability and durability of my toyota.
 
C

chainz

Well-Known Member
Last edited:
bustionbaby

bustionbaby

Unapproved commercial account.
I don't think all Chinese pipes are poor quality.

I have a bad purchase experience on a online store on 3th June. But last week, I bought one with US $36.58 only and they can also make OEM & ODM for trading company and wholesaler. I bought 10 pieces one month ago and recieved with surprise. Because their quality is good as I thought.

Here is the picture for you to see:
rB0KDFW5k93U7lP7AABF8Or6DXY936.jpg


Do you like this one? Or some other nice pieces to introduce? glad to try new ones.
 
bustionbaby,
bustionbaby

bustionbaby

Unapproved commercial account.
bustionbaby said:
I don't think all Chinese pipes are poor quality.

I have a bad purchase experience on a online store on 3th June. But last week, I bought one with US $36.58 only and they can also make OEM & ODM for trading company and wholesaler. I bought 10 pieces one month ago and recieved with surprise. Because their quality is good as I thought.

Here is the picture for you to see:
rB0KDFW5k93U7lP7AABF8Or6DXY936.jpg


Do you like this one? Or some other nice pieces to introduce? glad to try new ones.
Click to expand...

Here is the link:http://www.dhport.com/item/colorful...ing-ml07004/1320000765.html?f=BSO|PORT|SOCIAL
 
bustionbaby,
digigator

digigator

Well-Known Member
NickDlow said:
Well here it is. I had six nails laid out 3 "Quartz" bangers from hyman I believe and 3 random glass nails that came with dhgate pieces. I didn't even up testing them. One cuz there was no point, you'll see. Two I was heating it then dropped it like a dumb ass. In my defense I had a long night at work and just vaped so I'm all thumbs. If u want to see me do them let me know.


I did 2 different bangers but figured one was enough for the video seeing I don't know shit about editing.
Click to expand...

I like your style! :spliff: Thanks for posting that video, looks like we're safe with our china quartz! :rockon:
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
You must log in or register to reply here.
Top Bottom