• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

VapCap

Well-Known Member
Manufacturer
Haven't posted in this thread yet, but I went in for the VapCap way back when it was $10+$5 shipping. Seemed like an unrefuseable offer. This thing has a lot of intriguing pluses going for it, size, speed, cost, flexibility, analog... Does it come with the case pictured, and why is it so much taller than the unit?

Bamboo or an Ed stem seems match made in heaven for this design. But maybe it would remind me of a Chinese knockoff of the Okin :whoa:

Lastly, I wonder how harsh the vapor might be? Short path and all, I know the tube and stuff have some science going in there but does it cool the output well?

Yes, the case is included. Every VapCap gets the green case and the PyroVaps get the purple cases. The cases are plastic, but they work really well and seem to last a surprisingly long time.

I just talked to Ed today. I am sending him some parts tomorrow and we are going to see what we can come up with for a hybrid VapCap Woody. Please let me know if this is something anyone thinks I should add to the campaign.

The Vapor is very smooth and not harsh unless you overheat it or you put something in of questionable quality. The patent pending Inverse Air Induction really helps smooth out the extraction process.

Thank you everyone for the questions and another - Big Thank You for all the support!

George
 

snorcan

Stay charged, my friends
Can I add another vapman to my existing indiegogo order and combine the shipping cost?
 
snorcan,
  • Like
Reactions: VapCap

Mister G

Deceptively Old Fart
Yes, the case is included. Every VapCap gets the green case and the PyroVaps get the purple cases. The cases are plastic, but they work really well and seem to last a surprisingly long time.

I just talked to Ed today. I am sending him some parts tomorrow and we are going to see what we can come up with for a hybrid VapCap Woody. Please let me know if this is something anyone thinks I should add to the campaign.

The Vapor is very smooth and not harsh unless you overheat it or you put something in of questionable quality. The patent pending Inverse Air Induction really helps smooth out the extraction process.

Thank you everyone for the questions and another - Big Thank You for all the support!

George

I'd say putting an Ed offering on the campaign is a no-brainer yes.

Can you explain further this Inverse Air Induction principle, perhaps with an illustration?

Thanks for your participation here so far, I find your design quite novel, the click mechanism and all is particularly keen if it works like you say, actually, how loud is it really, can you compare it to another sound like the clicking of a tongue or cricket or something?
 

snorcan

Stay charged, my friends
No. You can not. Lol. Just giving you the business. I think you mean VapCap. :tup:

HA ha, yeah you are right, OOOPS.

Snorcan, or anyone that would like to come back for more; just contribute 20 and then send me a message from the campaign page right away to combine another VapCap or PyroVap to your first perk.

Yes, this is awesome, I am thinking I need a few of these for the camping box!
 

KeroZen

Chronic vapaholic
@Stu, @Mister G : I understand your curiosity but as he said patent *pending* it's best if he doesn't release too many details early. I would hate to see a chinese knock off released before the end of the indiegogo campaign...

PS: in fact "best" is not the right term, it's mandatory that nothing is released prior to the patent grant or it will simply be void.
 

Mister G

Deceptively Old Fart
@Stu, @Mister G : I understand your curiosity but as he said patent *pending* it's best if he doesn't release too many details early. I would hate to see a chinese knock off released before the end of the indiegogo campaign...

PS: in fact "best" is not the right term, it's mandatory that nothing is released prior to the patent grant or it will simply be void.

Fair enough, but is it possible they can explain what its benefits are, just for the curious? Not saying it's misleading, just want clarity.
 
Mister G,
  • Like
Reactions: Derrrpp

hektik8625

Well-Known Member
@Stu, @Mister G : I understand your curiosity but as he said patent *pending* it's best if he doesn't release too many details early. I would hate to see a chinese knock off released before the end of the indiegogo campaign...

PS: in fact "best" is not the right term, it's mandatory that nothing is released prior to the patent grant or it will simply be void.
For sure, this looks too easy to make :)
 
hektik8625,

Bvapst

Well-Known Member
Yes, it is a simple design and since I've loved my simple and manual vape...i'm looking forward that one.
As soon as I've seen the Vapcap I thought it look like a child from Vaponic and Lotus.

@VapCap Is there a possibility to participate to the campaign by any other method than a credit card payment ? I don't have any and really want to be "in".
Thanks
 

VapCap

Well-Known Member
Manufacturer
Yes, it is a simple design and since I've loved my simple and manual vape...i'm looking forward that one.
As soon as I've seen the Vapcap I thought it look like a child from Vaponic and Lotus.

@VapCap Is there a possibility to participate to the campaign by any other method than a credit card payment ? I don't have any and really want to be "in".
Thanks

If anyone would like to participate in the campaign without using a credit card, you can use paypal. This is a good service that allows you to use either a credit card, or money from a bank account to safely and securely purchase items online. Hope this helps.

George
 

caliwisp

Cali Dreamin'
Hi @VapCap thanks for this wonderful new product. Can't wait to try it out.

Is it possible to use it with hash either as-is, by "overheating" it past the click, or with a modified metal part that clicks at a higher temp?

Good luck with the manufacturing and all that you have to do in the next phase.

I am hoping I can eventually find a nice wooden dugout for these. Perhaps @Ed's TnT has some ideas!
 

VapCap

Well-Known Member
Manufacturer
:)
Hi @VapCap thanks for this wonderful new product. Can't wait to try it out.

Is it possible to use it with hash either as-is, by "overheating" it past the click, or with a modified metal part that clicks at a higher temp?

Good luck with the manufacturing and all that you have to do in the next phase.

I am hoping I can eventually find a nice wooden dugout for these. Perhaps @Ed's TnT has some ideas!

The VapCap will work with hash, and yes you can heat past the click to get higher vaping temperatures. I just strongly recommend you get familiar with the click and only go past it a few seconds until you get to know each other better. Once you get past the first few kisses you'll know how to treat her. :love:
And yes, I am Working on the dugout. This thing will be pretty cool. I hope to have a picture of it soon.

George
 

Bvapst

Well-Known Member
If anyone would like to participate in the campaign without using a credit card, you can use paypal. This is a good service that allows you to use either a credit card, or money from a bank account to safely and securely purchase items online. Hope this helps.

George
My bad.. I haven't seen it was Paypal able. I just need to refound my Paypal account now ! Thanks for showing me that.
Do you think we will be able to get shipped the innovations with the regular package ?
Being in EU I would love to get Ed's wood shipped with..or if any other accesories make their way untill official launch.
thx
 

Ed's TnT

Woodsman
Manufacturer
Good afternoon, @VapCap my man, it was nice speaking with you yesterday and I am really anxious to see what is possible! I am eagerly awaiting these pieces and have some ideas in my head that need to get out! Thanks for reaching out to me, I appreciate the opportunity!

@Mister G I appreciate you agreeing so!

@caliwisp A dugout maybe a possibility but time is the issue, I havent made a dugout since last year, just dont have time for them anymore, still looking for a company that produces high quality human clones, hoping someone makes a break through soon!

@Bvapst Hang in there with me bro!
 

VapCap

Well-Known Member
Manufacturer
My bad.. I haven't seen it was Paypal able. I just need to refound my Paypal account now ! Thanks for showing me that.
Do you think we will be able to get shipped the innovations with the regular package ?
Being in EU I would love to get Ed's wood shipped with..or if any other accesories make their way untill official launch.
thx

I hope to add several new innovations before the campaign ends. Things like Ed's hybrids and dugouts etc. Since these will weigh a bit more than a standard VapCap or PyroVap, and will likely be available at a different time, I will probably have to have a separate shipping cost for them. I hope you understand.

Thank you
George
 

IAmKrazy2

Darth Vapor
Good afternoon, @VapCap my man, it was nice speaking with you yesterday and I am really anxious to see what is possible! I am eagerly awaiting these pieces and have some ideas in my head that need to get out! Thanks for reaching out to me, I appreciate the opportunity!

@Mister G I appreciate you agreeing so!

@caliwisp A dugout maybe a possibility but time is the issue, I havent made a dugout since last year, just dont have time for them anymore, still looking for a company that produces high quality human clones, hoping someone makes a break through soon!

@Bvapst Hang in there with me bro!

I already have an old Ed dug out. Just saw it the other day. This wouldn't be standard dug out compatible would it? The VapCap appears to be thicker.

Glad to see you two collaborate.
 

Ed's TnT

Woodsman
Manufacturer
I already have an old Ed dug out. Just saw it the other day. This wouldn't be standard dug out compatible would it? It appears to be thicker.

Glad to see you two collaborate.

Hmmmm at this moment I cant say yay or nay, I do not have the parts just yet to know what is or wont be but figure if the parts got out today then I should know what is and what aint by then end of the week or weekend! Oh lets also not forget our man @Snappo for choice wood species if all goes well on my end, I am sure he would be more than happy to supply blanks for folks that want something a little more top shelf!
 

Seren

Away with the fairies
Well, a girl wants what a girl wants. And who would deny you that? Not I!
:D You're such a gent! :D

Bamboo or an Ed stem seems match made in heaven for this design. But maybe it would remind me of a Chinese knockoff of the Okin :whoa:

I agree - I think wood will be just perfect. I really can't wait to see what @Ed's TnT comes up with. I completely get your Okin comparison when it comes to the aesthetics of the bamboo - but their heating mechanisms, and I think the type of vaping experience they offer, are so very different. So, in my eyes, I don't really think they compare all that closely :shrug: :2c:

I just talked to Ed today. I am sending him some parts tomorrow and we are going to see what we can come up with for a hybrid VapCap Woody. Please let me know if this is something anyone thinks I should add to the campaign.

Loving the sound of that!! :clap:

How do you like it lil sis???

When I get my hands on one, I'll let you know big bro :)..... This is an Indiegogo campaign - so it will be a little while before the first units are sent out - for more info you can take a look here:

 
Last edited:
Top Bottom