• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Custom 3D printed Widgets - Delta 3D Studios

Delta3DStudios

Well-Known Member
Accessory Maker
Haha thanks guys!

First off, I'd like to announce that my website has been rebuilt! I worked with an artist to rebuild the site, I hope you like it a bit more than my old clunky design. So if you haven't stopped by the site in the past week, head on over and take a look at the new Delta3DStudios.com (It's still the same back-end so your order and login information is still saved, just the template has changed)


Now, on to the important business - Scoop-N-Tamp tools! I've got a few different designs here, and I'd love to hear some feedback on your favorite version, or what you like and don't like. I'll order a small batch of the favorite design. Please look these over and tell me which one you guys like

Design 1 - "The hook"

ekN3ALh.png

CyUVU0S.png



I went with a more curved tamp tool for this design, coming to a sharp edge which should help with scraping (I know some requested a scraping tool). While the rounded section would work well to tamp down loads ( It's 6mm wide, so it should fit a wide variety of vapes )


Design 2 - "The Notch"

8tCmkmi.png

PNZguMx.png


Subtle change from the other version - this one is much less curved than the hook version






Design 3 - "The boring rectangle"

ZgW76IC.png


Simple square tamping tool, nothing fancy




Please vote on your favorite design or offer a different tamp design idea, I'm looking to finalize this design over the next few days so I can place my first prototype order next week.


Edit - Regarding the Scoop-N-Stir and the Scoop-N-Poke. My next batch shipment was scheduled to ship yesterday but I still haven't seen a tracking number yet. That said, I do have ONE stainless steel Scoop-N-Stir and ONE golden Scoop-N-Poke back in stock and ready to ship (customer cancelled order)
 
Last edited by a moderator:

vapebuddy13

Your resident Super Hero
Haha thanks guys!

First off, I'd like to announce that my website has been rebuilt! I worked with an artist to rebuild the site, I hope you like it a bit more than my old clunky design. So if you haven't stopped by the site in the past week, head on over and take a look at the new Delta3DStudios.com
Love the improvements/overhaul to the site
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Haha thanks guys!

First off, I'd like to announce that my website has been rebuilt! I worked with an artist to rebuild the site, I hope you like it a bit more than my old clunky design. So if you haven't stopped by the site in the past week, head on over and take a look at the new Delta3DStudios.com (It's still the same back-end so your order and login information is still saved, just the template has changed)


Now, on to the important business - Scoop-N-Tamp tools! I've got a few different designs here, and I'd love to hear some feedback on your favorite version, or what you like and don't like. I'll order a small batch of the favorite design. Please look these over and tell me which one you guys like

Design 1 - "The hook"

ekN3ALh.png

CyUVU0S.png



I went with a more curved tamp tool for this design, coming to a sharp edge which should help with scraping (I know some requested a scraping tool). While the rounded section would work well to tamp down loads ( It's 6mm wide, so it should fit a wide variety of vapes )


Design 2 - "The Notch"

8tCmkmi.png

PNZguMx.png


Subtle change from the other version - this one is much less curved than the hook version






Design 3 - "The boring rectangle"

ZgW76IC.png


Simple square tamping tool, nothing fancy




Please vote on your favorite design or offer a different tamp design idea, I'm looking to finalize this design over the next few days so I can place my first prototype order next week.


Whooooo nice job Ratch!!!

Does that notch go at an angle, vs a straight line for the hook? Box cutter style. I think might be pretty neat, I think I also like its more subtle curve as well.

My only thought would be on rounding off the corners of the scraper, so they're not too sharp at the corners, and can be scraped around a circular bowl more easily? Kinda like a flat toothpick in a way, but not as narrow or pointy, subtler than that.

I'm not sure if it will work as well for the people who want tamping, but its looking like the notch could be the perfect scraper (and stirrer/flipper) tool I was thinking of...

Again great job and thanks! You can go ahead and sign me up for a plain ss finish model as soon as its in (depending how we change the design, but really I'm pretty sure I'm in)
 

caphector

Well-Known Member
I'd echo that lightly chamfering the corners of the tamper would be good - no need to let people poke themselves with the corners if they don't need to. Also, I don't think there are many scoop-y things with a right-angle corner.

I've been using the Scoop-n-Stir as a tamper and it seems to work reasonably well. I'd be willing to try whichever design you pick for testing.
 

snackmaster

Well-Known Member
Edit - Regarding the Scoop-N-Stir and the Scoop-N-Poke. My next batch shipment was scheduled to ship yesterday but I still haven't seen a tracking number yet. That said, I do have ONE stainless steel Scoop-N-Stir and ONE golden Scoop-N-Poke back in stock and ready to ship (customer cancelled order)

Hooray! I snagged the stainless SNS, which is awesome because I'd planned to order one yesterday, but then saw availability got pushed back.

Also added an organizer to the order after seeing how slick @Enchantre's looked a page back.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
What about a round tamper like the basic tool that comes with the fm and imag but with a big head to tamp with??most of.my vapes would take a round circle to tamp with I stead of the rectangle

Makes more sense for a tamper I think, but then we'd definitely need separate scoop n tamp and scoop n scrape...
 

Delta3DStudios

Well-Known Member
Accessory Maker
Makes more sense for a tamper I think, but then we'd definitely need separate scoop n tamp and scoop n scrape...
Lol, ok, Damn inventory is going to suuuck, Might have to start figuring out the most popular versions and keep those in stock, the other versions will be limited to my Shapeways store (3 week wait time)
 

The Stranger

Account Closed
I personally think if I were to buy one I would prefer "the hook". I can see where the rectangle one would kind of be nice, but the hook doubles in functionality because you can also scrape out with it.

I'm thinking a four sided, as someone mentioned before, is in order! :nod:

Or better yet, something like this!!

smartkey-normal.jpg
 

Fission

Well-Known Member
Loving the store, Ratchett. I'm about to order the nearly universal waterpipe adapter for my flowermate and a 18mm>14mm reducer to connect my (future) grasshopper to the d020-d. Just out of curiosity, are there any coupon codes for FC going right now?
 

Delta3DStudios

Well-Known Member
Accessory Maker
Loving the store, Ratchett. I'm about to order the nearly universal waterpipe adapter for my flowermate and a 18mm>14mm reducer to connect my (future) grasshopper to the d020-d. Just out of curiosity, are there any coupon codes for FC going right now?
Thanks for taking a look around! Sadly I don't have any coupons available at this time. Perhaps later in August I'll consider an end-of-summer sale.....
 

cybrguy

Putin is a War Criminal
I'm starting to collect too many glass stems and adapters and they are cluttering up my table. Seems to me your Organizer should be a good option for that.
Do you have all colors in stock?
I'm guessing all the holes will take 18mm pieces? Is the one in the middle tall enough to hold a 7" stem upright?
 

Delta3DStudios

Well-Known Member
Accessory Maker
I'm starting to collect too many glass stems and adapters and they are cluttering up my table. Seems to me your Organizer should be a good option for that.
:lol: Yeah it seems like a lot of people like that honeycomb organizer - I really only made it for myself to organize my vape desk!

Do you have all colors in stock?
Beauty of 3D printing is I maintain 0 physical inventory. I keep a roll of each color listed on my site so I can print my accessories when ordered. So essentially "yes" I have all colors in stock - but it takes me 1-2 days to print the item :lol:

Purple is my newest color, but I'm always looking to add new colors to my collection. If you want something I don't have, let me know and I'll grab a roll.
 

cybrguy

Putin is a War Criminal
I actually like Purple a lot, and that is what I'll go for. I asked this question in an edit so you probably missed it.
I'm guessing all the holes will take 18mm pieces? Is the one in the middle tall enough to hold a 7" stem upright?

I've been wanting to order something from you and from Joda for a while. I like supporting members. You get my biz first, but I expect Joda will get some biz soon too... ;)
 

Delta3DStudios

Well-Known Member
Accessory Maker
I'm guessing all the holes will take 18mm pieces? Is the one in the middle tall enough to hold a 7" stem upright?

What diameter? I keep an 11mm diameter pen in the center of one stand it stays upright. The center hole is approximately 15mm in diameter, and 48mm deep.

Orange is my choice..

Sounds good, I'll see what I come up with. I've been thinking about buying an Orange SCS grinder because I like that color :lol:
 
Top Bottom