Kind MD Vapes

invisiblefriend

Well-Known Member
Manufacturer
DING DING DING --- you are the # 100 POST since KIND MD started this thread over the past winter during teasing and development ! we have received amazing resources and feedback from the members in this fine fine community -- I respect the honest and open conversations we have -- it has helped me so much moving forward !

ahhhhhh yeaaaa @710 I luv it-- much respect:clap::clap::clap::clap::clap::clap:

Ok this deserves a prize ! -- and more should follow --
I will announce more later MR 710 :) thank you for the support and post # 100 !!!!!:leaf:




NeXT winner is post # 123 ...................


# 123 is a special # to me and always has -- forward / backward or added up @ 6 ! :) :love:


123 is a special #
(special bonus to the #123rd post coming up :) ) :whoa:
 
invisiblefriend,

Alaskan Vaper

New Member
Hello FC members, and invisablefriend. Love the forum.

Invisiblefriend, i can't wait to see the website open. I am a lurker who purchased a few MD-72-2 coils from you on ebay almost 6+ months ago. Still have not had a single problem with my coil. Gave my "extra" one away to a good friend who shorted it while cleaning it. (Total user error).

I cant wait to be able to order a new coil or 5 for all the buddy's who are in great need of a proper coil. Might also try the new slim cartridge. Looks very intriguing.

Well good day to all. Just wanted to put another great review of the coils. I love mine! Never fails me. Hard sessions with buddies have had no ill effects on the coil. Still gives a great clean taste unlike other coils I have tried.

Keep up the good work. Wishing the best with the website and all the other endeavors you are currently tackling.
 

710

Well-Known Member
purchased a few MD-72-2 coils from you on ebay almost 6+ months ago. Still have not had a single problem with my coil.

Hard sessions with buddies have had no ill effects on the coil. Still gives a great clean taste unlike other coils I have tried.

This is what I want to hear.

@invisiblefriend I didn't even notice... sweet! July 22 isn't that long now. Can't wait to experience the future :science::chill:
 

Alaskan Vaper

New Member
@710 definitely has justified the purchase many times over. Used heavily with waxes, oils, shatters, I use a itaste vv4.0 battery at usually 4.0 v the coil reads at 1.6 ohms and recommends 3.98v. I have pushed it harder, 4.3-4.5 at times. Not one issue with it at all. And I am too lazy to clean it properly all the time. I have only had to clean it maybe 3 times since I purchased it. I use it daily with about 1 gram oil weekly.
 

invisiblefriend

Well-Known Member
Manufacturer
@710 --- Package out first thing ! -- sorry for small delay -- check PM

but now you get the bonus ! :)

& ill be adding the new 1.5ohm coil with the .80 coil :) :rofl:



Much respect to everyone for the Kind Luv !


its gr8 to be part of such an amazing community !


I am so happy to be able to offer these quality products to everyone !

(im so glad to hear about the long term - MD-72 coils --- Im always amazed as I still use them and only switch when I move on to test the next best :) - and I always go back just to make sure we going in the best direction ! )

** MY ADVICE
-- to everyone - not just KIND MD customers --
if you are confident you are using TRUE titanium2 (they are DURABLE) or quality ceramic elements too -- plz try your best to clean -- as often as possible - the more often the better the taste and experiences and the less messy it all becomes !


I try and recommend always having at least 2 coils of the same type/ ohm or brand you like and enjoy !
-- (I'm not trying to sell extras -- just advice ! ) if you have two 2 - you can switch every 1 - 4 nights and literally clean one in 99 percent alcohol once you have dried and burned all oil you can outa it -- (be smart though-- don't burn like crazy -- don't give it a chance to dry so much it breaks -- (not easy !!!!)

put in the lil container of alcohol as you start using your newly cleaned coil that you removed in the morning and both air dried and vape dried by vaping a very low temps --- like 3volts -- for long term --

please feel free to use the KINDMD cleaning tool or and similar tool to clean the coil as often as possible --
-- I clean coils in between filling every time ! It gives me lots extra residual medicine i use at the end of the month for my baking ! (i also use the stuff left over from cleaning the coils and the tools) you will be amazed -- it is usually a heady powerful batch -- its high thc levels concentrated together is an added bonus at the end of each month ! and its FREE (recipes will be on our site ! )


enjoy -- and RESPECT your coils ---- oh yes -- its also a bonus to have that 2nd coil -- so in the rare occasion something maybe does happens to one coil -- thats the cue to order a new one -- no running around looking for what is needed --- the less stress the better my friends :)
- my new motto -- lol :rofl:


Much LUV

:rofl::rofl::rofl::rofl::rofl::rofl::rofl::rofl:
 

710

Well-Known Member

Good advice! Of course, I never ever clean my coils. I just vape the reclaim right off. I don't go easy on my things I guess. Maybe with these I'll actually take the time to properly make them like new... we'll see!

Great to see another update. Hopefully the grand opening goes well tomorrow :D and looking forward to seeing the discussion going on here after everyone is nice and toasty.
 

invisiblefriend

Well-Known Member
Manufacturer
Good advice! Of course, I never ever clean my coils. I just vape the reclaim right off. I don't go easy on my things I guess. Maybe with these I'll actually take the time to properly make them like new....

you will be amazed by the difference a lil "sweeping" of the coils will make in between sessions :)
especially once you receive the new MD-72 stainless steel sweeping tool
(included in your shipment my friend):wave:

I look 4ward 2 hearing your feeling on it once you have the new tool in your hands :rofl:


thx 4 all your positive vibes KIND brother 710 :rofl::rofl:
 
invisiblefriend,
  • Like
Reactions: 710

vaporchaser420

Active Member
I can attest to this, although I have yet to try the new sweeping tool, I wrap my own coils with thicker wire and I'm always scraping off the black carbon residue, (this residue will kill the coils much faster), I've managed to have coils last over two months of heavy abuse, (about 3-4 grams of shatter a week), two months as long as you scrap off the carbon build up, to me the fact that kind md vapes is coming out with a tool especially for this, means they want our coils to last, and being a recent purchaser of the newest Ti gr 2 dual coils(I won't say from which company), but those coils died in less than three days, it was a pretty awesome three days but I paid a fair amount and three days is not what I expect when paying so much, (btw I heard of other ppl with the same problem), I personally give kind md respect for this alone, but lets see how their coils perform(although they are saying all the right things in their description) before I start handing them over pockets of cash.
fingers crossed looking for the ultimate coils
maybe kindmd?
 

Alaskan Vaper

New Member
Ok. To all who clean their coils religiously, I commend you! I personally have found as long as I have picked the almost negligible residue that builds up between the wires, this coil has not had any issues with taste or durability issues... yet.

With the co2 oil I have available to me, the coil has kept up with my personal use/ time to time sessions with a few buddies. I am patiently awaiting the website opening up so I can try the newer coils (and be able to have a few on hand so I can have a extra or 2 to switch thru).

I use my pen as my daily rig. Nothing else. Just works out best for me. So having any down time is detrimental to my health!
 
Alaskan Vaper,

AnthoFranco

Well-Known Member
Thanks so much @invisiblefriend sending me the kind slim cartridge.:clap:

ive have been meaning to send out some prop's to you. great job, cant wait for website to open!!:love:

i attached it to my miniVF and the temperature control aspect is flippin' awesome!!

nice, slow sip is producing huge hits. i have it dialed it @ 7.3 watts and 360 degree's.

i had it turned up to 420 degrees and lost some flavor. so, i think ill keep it on the lower temps. (one big hit and im vaked, so experimenting with other temps in 1 session is/can be expensive):leaf:

Of course, I never ever clean my coils. I just vape the reclaim right off. I don't go easy on my things
im with you, i tend to be hard on my tools. when i have tried to clean a coil in the past, i end up breaking it. so it is rare to scrape or BRUSH it.

you will be amazed by the difference a lil "sweeping" of the coils will make in between sessions :)
i certainly will. i just need a back up KMDV :tup:

that being said, with temp control, build up on coils is minimum.

i have only run a couple of G's thru atty, oil pack en route for extensive tests.

im am not too into phone/pictures. i will try to upload a pic of un-swept coil under TC regulation.

Fuck Combustion!!

thanks Chris, for getting me involved!! :rockon:
 
AnthoFranco,
  • Like
Reactions: 710

invisiblefriend

Well-Known Member
Manufacturer
Got some stuff coming in the mail today. It feels like Christmas :)

Will post review and pics later.
enjoy my friend ----- looking 4ward 2 your enjoyment ! and your report ! :)

thank you for your continued support !


ps

I believe when I packaged you up -- I put it all in one box to save on shipping $$$ ...
so -- once you open the battery box -- the cartridge parts will be inside as well :)

I will forward you the instructions & will post here ... if you have any questions or anything at all just say the word !

always here to help !

Peace and respect ! .............

I will be posting an update and some good photos tonight as well !

We held up a drop on the website -- Unfortunately our stock got too low in a few areas after all our testing and marketing / local collective sales (we were able to get our product into a few amazing oil companies who will be packaging our units with the medicine/oil !)

Very Excited and thankful !
(I didn't want to only put the cartridge up without being able to match with one of our batteries when wanted -- plus we have the ceramic option available any day .... so it will line up much better so nobody gets left out ! )

:) I didn't realize we had so much support and amazing love from our online community -
We have gotten to this point listening to all of your amazing ideas & positive vibes ! We always will continue that business model as we work towards making that "FINAL" vaporizer that is just perfect for YOU !
*** some amazing things on the horizon ! ***

If anyone would like to purchase any of our current items prior to the site being live of course we can help our community -- so just PM and we will work it all out ! but the site will be live any moment once I have the confirmation from inventory !

More announcements tonight --
I imagine we will have the site up with 80 percent of our products ready in a few days !
and

by the end of August we will start releasing the new True Temp Control Vape along with our True i30 - 2 amazing vape batteries -- BOTH with pass through power for home and travel use !

True Temp with True Titanium option !

Im testing the new products for the fall and huge huge things happening ! (...... hint hint )
---

i feel so bad the site has been down so long --

ill be so excited to get back top sharing everything from our daily progress and testing and research/development !
this is a team effort and we use our customers to take us to the next level always trying to offer the safest and very best products in the industry ! You all have given us the best and most amazing ideas and we keep trying -- and we have developed an amazing line because of our in-house team as well as the amazing outside team ! -- (that is all of you ! )


 

invisiblefriend

Well-Known Member
Manufacturer
@710 I put 2 different mouth pieces in your kit ...

I was hoping to have our ceramic in b4 I sent your package out --- but we just got them in so ill get you one out right away --
I recommend the stainless steel mouth tip for coils and the silicone mouth piece for the new ceramic heads since it can get a bit hotter if you running it high :)
(I'm still testing using different wicking inside our ceramic disk setup -- )
Honestly we may ship ceramic element with the health stone -- but I'm not 100 percent behind yet - the results seem so much better with no wick at all -- just keeping the heating element disk a drop higher so the oil below gets pulled up --

we have tried so many things --- i was OK with a titanium mesh inside the cup (so - so / much better than airstone or the health stone which both imo burn the oil 2 fast ! -- and it even was a drop better with a felt type mesh material -- but I'm searching for something super safe and the material .. well I'm not so sure about ??? so the search continues -

it works great with no wick -- as long as you don't put .5 of a gram in n burn it up -- but if you put a session at a time -- you could be great 2 go wick less with the donut !

be back in a bit my friends

on way into the lab :)
 

invisiblefriend

Well-Known Member
Manufacturer
I wanted to mention --

again I thank everyone -- and I hope everyone understands .... we are trying to keep up with everyone in this busy and incredible industry ! so fast paced it is !

Its very exciting currently with new concepts and ideas about every day ! everyone looking to find and develop the final and best tool for our medicine !

We have been and will continue to work very hard ! anyone following us can probably tell / see we didn't jump to sell and release our products --

HONESTLY -- I could have been selling certain products for months by now ! but we were really trying to be ahead especially with quality, safety and customer service ! We have changed many small and a few large things after massive testing (also have changed our process in many ways ! ) - and as we tested we discovered new and better things -- which kinda keeps things continuing to evolve !

Unfortunately financially we need to make a certain amount of each part so even testing has lost us bunches of money -- just because we wanted to jump ahead to a better technology or idea ! So of course currently its not a money making endeavor .. almost more pf a research and development company that will keep evolving -- looking to make a true and honest name within this industry !

as I'm releasing 2 brand new cartridges this week (after changing and even giving away many past designs 4 feedback and after changes :) ) its amazing how fast things are moving ! but I love it and I love the input from our customers ! Just ask and if we didn't do it yet we will give it a try ! I cannot wait to show you guys some failures lol ------ and then the winners !!!!
--- I must be honest and say even right now as I type I have 2 amazing projects in the lab I cannot wait to bring to market !!!! ill have some vape porn up any moment !


** I wanted to mention on here that when we start selling on our web site again --

we will also be releasing a 2nd NEW "KindMD Traditional Hash OIL Cartridge" - this is probably a reminder of your first time with a pen ... or when peeps were making thur own outa e-cig atomizers -

I have always -- ALWAYS found myself going back to these every so often to get a different type of hit IMO and I liked the idea of holding almost .5gram of medicine -- I just always had flow issues or taste issues ? or burn-out issues of course ! NO MORE ....

we grabbed the few competitors who still make similar atomizers / cartridges for our community and we tore them apart -- again looking for a better way and a healthier way of course !
We then rebuilt it from the ground up with all KindMD surgical grade parts -- of course including our TITANIUM2 coil but set up with a slight different technology for a cooler vape (keeping the taste great as you munch away at he 1/2 gram ! )
-we built these with the same technology and strength as the MD-72 coils but also made these special for use with variable voltage and more important our new Temperature Control device !
no glue or soldering of course
*** these will NOT NEED TO BE PRIMED like some others ... this is the first example of the material used -- The Titanium2 is strong and not only can handle dry burn but can be touched by our stainless steel cleaning tool by sweeping back and forth with zero damage !
Perfect for new medical users -- or the most medicated because of how low key / the taste / the volume .....etc.... great for on the go -- you can even cap it off !
:wave:
best choice for qwik vaping all your medicines - essential oil, waxes, budder, crumble, shatter and other full melt concentrates
(look out at your local dispensaries and please ask for KindMD if you do not see us -- many use these as the pre-filled carts -- )

high volume / holds over .5 gram !!!! :rofl:

no leak / no mess / easy to start -- easy to finish - tasty throughout
compatible with all 510 e-cig batteries or mods
perfect for our i30 or TC50 batteries
we are staying with our TRUE Titanium2 but this time we are using our "new" ceramic wick
special ceramic cup with new side air design !

Each one comes with its own special filtered drip tip !

Of course photos will be up shortly with full info -- Just wanted FC community to know was sup 1st :):rofl:
 

vaporchaser420

Active Member
I wanted to mention --

again I thank everyone -- and I hope everyone understands .... we are trying to keep up with everyone in this busy and incredible industry ! so fast paced it is !

Its very exciting currently with new concepts and ideas about every day ! everyone looking to find and develop the final and best tool for our medicine !

We have been and will continue to work very hard ! anyone following us can probably tell / see we didn't jump to sell and release our products --

HONESTLY -- I could have been selling certain products for months by now ! but we were really trying to be ahead especially with quality, safety and customer service ! We have changed many small and a few large things after massive testing (also have changed our process in many ways ! ) - and as we tested we discovered new and better things -- which kinda keeps things continuing to evolve !

Unfortunately financially we need to make a certain amount of each part so even testing has lost us bunches of money -- just because we wanted to jump ahead to a better technology or idea ! So of course currently its not a money making endeavor .. almost more pf a research and development company that will keep evolving -- looking to make a true and honest name within this industry !

as I'm releasing 2 brand new cartridges this week (after changing and even giving away many past designs 4 feedback and after changes :) ) its amazing how fast things are moving ! but I love it and I love the input from our customers ! Just ask and if we didn't do it yet we will give it a try ! I cannot wait to show you guys some failures lol ------ and then the winners !!!!
--- I must be honest and say even right now as I type I have 2 amazing projects in the lab I cannot wait to bring to market !!!! ill have some vape porn up any moment !


** I wanted to mention on here that when we start selling on our web site again --

we will also be releasing a 2nd NEW "KindMD Traditional Hash OIL Cartridge" - this is probably a reminder of your first time with a pen ... or when peeps were making thur own outa e-cig atomizers -

I have always -- ALWAYS found myself going back to these every so often to get a different type of hit IMO and I liked the idea of holding almost .5gram of medicine -- I just always had flow issues or taste issues ? or burn-out issues of course ! NO MORE ....

we grabbed the few competitors who still make similar atomizers / cartridges for our community and we tore them apart -- again looking for a better way and a healthier way of course !
We then rebuilt it from the ground up with all KindMD surgical grade parts -- of course including our TITANIUM2 coil but set up with a slight different technology for a cooler vape (keeping the taste great as you munch away at he 1/2 gram ! )
-we built these with the same technology and strength as the MD-72 coils but also made these special for use with variable voltage and more important our new Temperature Control device !
no glue or soldering of course
*** these will NOT NEED TO BE PRIMED like some others ... this is the first example of the material used -- The Titanium2 is strong and not only can handle dry burn but can be touched by our stainless steel cleaning tool by sweeping back and forth with zero damage !
Perfect for new medical users -- or the most medicated because of how low key / the taste / the volume .....etc.... great for on the go -- you can even cap it off !
:wave:
best choice for qwik vaping all your medicines - essential oil, waxes, budder, crumble, shatter and other full melt concentrates
(look out at your local dispensaries and please ask for KindMD if you do not see us -- many use these as the pre-filled carts -- )

high volume / holds over .5 gram !!!! :rofl:

no leak / no mess / easy to start -- easy to finish - tasty throughout
compatible with all 510 e-cig batteries or mods
perfect for our i30 or TC50 batteries
we are staying with our TRUE Titanium2 but this time we are using our "new" ceramic wick
special ceramic cup with new side air design !

Each one comes with its own special filtered drip tip !

Of course photos will be up shortly with full info -- Just wanted FC community to know was sup 1st :):rofl:
vape porn? yes please!
 

710

Well-Known Member
I received my cartridges and battery yesterday, and got some homies together to try it out. They were all pretty impressed with this thing, and they have used pretty much every vape I've ever had.

Coils heat up nice and evenly, and seem like they could handle quite a bit of power. I only tried it at a max of 4.2V, which worked out nicely. We all got some very decent clouds. The taste is very clean, too. I still don't know what to think of this new airstone wick, but all I know is that I don't really taste it, and it wicks extremely well as @invisiblefriend said. I only loaded a tiny test dab at first to prime it, and we actually got quite a few big hits of it. I was surprised.

The capacity is wonderful, I can comfortably put around .3g in, which was more than enough for a great sesh.

The 30W box mod works perfectly. I haven't even tried the sub-Ohm cartridge yet, only the 1.5Ohm one.

There were a few different adapters and I was confused as to which one to use, but I think I figured it out. Everything appears to be hitting and connecting alright so.... I'm not worried.

One thing I wish this cartridge had was some glass or a see-through window. The holes on top of the coil cap have that Vhit Glacier effect, and I know it looks badass... too bad I can't see it. It does it's job, however, of making the hit a little more smooth. Thinking about finding a globe to try. The metal tube and everything else is a quality piece, and seems very sturdy. I like the whole assembly, it kind of reminds me of the Gentleman's cartridge but with more parts.

This is definitely something I'd take mountain biking, which is one of my favorite things to do in Washington State. Get insanely dabbed out and hit the jumps and downhills.

Thank you @invisiblefriend for the chance to try this! I will recommend it to everyone, and will be coming back to your online store (when you finally open it :mad:) :clap:

Here are some pictures (will probably upload some cloud shots later)

78SWmDG.jpg

WvSyagh.jpg

HMIWBja.jpg
 
Last edited:

vaporchaser420

Active Member
how is the airstone compared to a fc2000 wick?, the pics look like a solid piece of marble, also is the base for the slim cartridge the same ones used typically for glass globe style atomizers? if so bonus!
I received my cartridges and battery yesterday, and got some homies together to try it out. They were all pretty impressed with this thing, and they have used pretty much every vape I've ever had.

Coils heat up nice and evenly, and seem like they could handle quite a bit of power. I only tried it at a max of 4.2V, which worked out nicely. We all got some very decent clouds. The taste is very clean, too. I still don't know what to think of this new airstone wick, but all I know is that I don't really taste it, and it wicks extremely well as @invisiblefriend said. I only loaded a tiny test dab at first to prime it, and we actually got quite a few big hits of it. I was surprised.

The capacity is wonderful, I can comfortably put around .3g in, which was more than enough for a great sesh.

The 30W box mod works perfectly. I haven't even tried the sub-Ohm cartridge yet, only the 1.5Ohm one.

There were a few different adapters and I was confused as to which one to use, but I think I figured it out. Everything appears to be hitting and connecting alright so.... I'm not worried.

One thing I wish this cartridge had was some glass or a see-through window. The holes on top of the coil cap have that Vhit Glacier effect, and I know it looks badass... too bad I can't see it. It does it's job, however, of making the hit a little more smooth. Thinking about finding a globe to try. The metal tube and everything else is a quality piece, and seems very sturdy. I like the whole assembly, it kind of reminds me of the Gentleman's cartridge but with more parts.

This is definitely something I'd take mountain biking, which is one of my favorite things to do in Washington State. Get insanely dabbed out and hit the jumps and downhills.

Thank you @invisiblefriend for the chance to try this! I will recommend it to everyone, and will be coming back to your online store (when you finally open it :mad:) :clap:

Here are some pictures (will probably upload some cloud shots later)

78SWmDG.jpg

WvSyagh.jpg

HMIWBja.jpg
 

710

Well-Known Member
how is the airstone compared to a fc2000 wick?, the pics look like a solid piece of marble, also is the base for the slim cartridge the same ones used typically for glass globe style atomizers? if so bonus!

I got 2 types of bases. One that has O-rings, and one that doesn't. The O-ring one was the only base that you could put the metal tube on so I just used that. I think the other "bases" were 501 - mod adapters?? Not sure, @invisiblefriend help us please :D

I've never used black ceramic (FC2000) but isn't that what W9/UpTech uses? I've heard it works really well, but can't compare it to this airstone stuff. What I can tell you is airstone wicks up really fucking well, and even though invisiblefriend said he doesn't like how it "burns" oil, or turns it into liquid, I believe it works perfectly. It can hold a lot of oil, and doesn't taste burnt or stale at all. I'm still skeptical about it because most airstone is made from fiberglass, but I think he told me that it's natural airstone. It holds up well though, and I can't taste anything but my concentrate. Hope I answered your question.

I'll take some pictures of whatever you guys want. I let my friend borrow it for a day because I have a 12 hour shift tonight, so I'll be able to take some more later.
 

vaporchaser420

Active Member
I got 2 types of bases. One that has O-rings, and one that doesn't. The O-ring one was the only base that you could put the metal tube on so I just used that. I think the other "bases" were 501 - mod adapters?? Not sure, @invisiblefriend help us please :D

I've never used black ceramic (FC2000) but isn't that what W9/UpTech uses? I've heard it works really well, but can't compare it to this airstone stuff. What I can tell you is airstone wicks up really fucking well, and even though invisiblefriend said he doesn't like how it "burns" oil, or turns it into liquid, I believe it works perfectly. It can hold a lot of oil, and doesn't taste burnt or stale at all. I'm still skeptical about it because most airstone is made from fiberglass, but I think he told me that it's natural airstone. It holds up well though, and I can't taste anything but my concentrate. Hope I answered your question.

I'll take some pictures of whatever you guys want. I let my friend borrow it for a day because I have a 12 hour shift tonight, so I'll be able to take some more later.

The base of the one with O rings, is it possible to slap on a glass globe on it and have it fit perfect?, if this is the case maybe kind md could have a kit in the future w the slim design and have a glass globe in the kit as well, so the user could have the option of long slim metal tube or the glass globe. hint hint
Airstone sounds perfect so far, no burning and wicks perfectly?, sign me up!
How is the timer function on the i30 battery, I know most box mods have a 10sec cut off function, so the i30 sounds interesting w its elongated timer(yay! time for some super long hits)
thanks in advance for all the insight 710! reading this thread has gotten me pretty excited especially reading some of the earlier stuff when they mentioned bubbler type options! (awesome, bubblers for vapes, I love water filtration!)
 

710

Well-Known Member
The base of the one with O rings, is it possible to slap on a glass globe on it and have it fit perfect?

Pretty sure there's room. I'm chilling with the guy I lent my vape to today, and we're going to head up to the headshop :razz: and buy a globe to play with. Will post pics of that if all goes well.

How is the timer function on the i30 battery

I really like the timer, it's nice to see how long exactly you held the button down for. However, I don't just hold the button down, I pulse it, so it doesn't help me that much. I think the longest I got was 9 seconds when I was going for a monster rip, I could never imagine holding it down for longer for any vape, especially with a battery that goes up to 6.5V 30Watt.
 

vaporchaser420

Active Member
@”710” good luck at the headshop and let us know how the experiments go, 30w for 9 sec is def a huge rip I was thinking more lower wattage dab for better flavor, but that would require longer than 10 sec, let us know if you experiment with lower wattage longer rips.
edit good to know at least one kind of globe fits

Btw For those of you who got the sweeping tool make sure you never ever hit the power when cleaning, this at the very least will cause the coils to short killing your coil, in fact if your noobish I would make sure the device is completely off(meaning if the power button was activated no power is going to the coil)when using the sweeping tool, take care everyone, I'm excited to hear more reviews.
 

invisiblefriend

Well-Known Member
Manufacturer
Definitely got to watch out with cleaning your coil in between real cleanings. For the noob, I would personally say it is the safest to clean with your battery disconnected from the atomizer. My secondary coil was shorted out by a noob friend who I lent it to. :ugh:

interesting -- and thank you for the unfortunate friends:razz: "test" :) ( no worries ill get a new coil and wanna get the new ceramic element out as well my friend ) :)

I never put thought to cleaning and the battery accidentally going on - but it obviously can happen easy unless we have 4 hands :) :rofl:..... (thank u for heads up ! )
-- i guess the cleaning tool is stainless steel and touching the metal inside with the battery join -- cannot be a good thing --

I will be looking for a shutoff or safety feature for future ! -- thk u for bringing up & sorry it happened -- but a great public service announcement -- n great advice for us to advance with !!!!!!!

thank u so much my friend !

I will be posting a bunch tonight -- gotta answer a few questions ... :clap: but so happy to hear some FC peeps enjoying :)

BIG HUGE UPPS :rofl:@Alaskan Vaper
 
Top Bottom