• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

Delta3DStudios

Well-Known Member
Accessory Maker
rBVaG1Weh8KAIqm-AALHIabkhYg452.jpg


Wonder how much drag this one is gonna have

http://www.dhgate.com/store/product/cb-32-new-design-fab-egg-glass-bong-with/246388650.html


giphy.gif


Thank you @sunshinestore. Finally a vendor I trust selling something I want. SOLD!

Buying it right now..... hmmm, what else do I want :lol:
 
giphy.gif


Thank you @sunshinestore. Finally a vendor I trust selling something I want. SOLD!

Buying it right now..... hmmm, what else do I want :lol:
A bro keep in mind without a inline that honeycomb by itself is going to create an initial drag. Also that much percolating prior to the egg will also make it function much different than Steve's Egg and Motherships. However it is 12.5 inches tall and has more holes in the egg than Steve's!!!
And coming from SSS big plus for much less than Steve's!!
 
Last edited:

Delta3DStudios

Well-Known Member
Accessory Maker
A bro keep in mind without a inline that honeycomb by itself is going to create an initial drag. Also that much percolating prior to the egg will also make it function much different than Steve's Egg and Motherships. However it is 12.5 inches tall and has more holes in the egg than Steve's!!!
And coming from SSS big plus for much less than Steve's!!

It looks cool, and I have a few different vapes I can use - my LSV will probably work just nicely even if it's high drag. I don't have any experience with MS or other swiss glass, so it will be hard for me to compare.

If nothing else, it'll look sweet as a display rig in the photos for my online store :D
 

John Lewus

Well-Known Member
I only dab in my car mostly because I live at home with parents and they don't let me smoke inside. I drive better dabbed out more cautious and on the lookout for cops haven't been in accident since I started smoking lol.
function looks good mabe he will fix vortex I hope

that's an Fc-1000 you can tell by mouthpiece wouldn't recommend you get the fc-707 because you will get water in your mouth for sure.[/QUOTE]

This entire time I had the FC-707 and FC-1000 swapped in my head. The mouth piece on the FC-1000 definitely looks better to me.
 
John Lewus,
  • Like
Reactions: SSVUN~YAH

EverythingsHazy

Well-Known Member
that's an Fc-1000 you can tell by mouthpiece wouldn't recommend you get the fc-707 because you will get water in your mouth for sure.
This entire time I had the FC-707 and FC-1000 swapped in my head. The mouth piece on the FC-1000 definitely looks better to me.
Agreed on the fc-1000 neck :tup:
 
EverythingsHazy,
  • Like
Reactions: SSVUN~YAH

PuffNStuff

Well-Known Member
I imagine it will have some sort of support. Looks like they tried to do the mobius thing but I just want a normal support and a more bent neck
 
PuffNStuff,

wolfJflywheel

Well-Known Member
Honestly this is a very weird question.. Mods can delete if they want. I searched dhgate the internet and thought of another place to ask, here has most knowledge.

My mattress is a piece of junk. Walmart sells memory foam mattresses for like 200$~. Something tells me there from china. Does anyone know where I could just order one and skip walmart?


On a side note and relevant to this thread: I LOVE AND WILL NEVER SELL MY FC-186.

If you look at most items on DHG that are already being imported in large quantities by US retailers like Walmart or Amazon or eBay resellers, you'll find that you actually pay more to wait longer on most DHG alternatives. You'll find this applies to pretty much anything other than new electronics with outdated hardware, glass pipes, and maybe some of the weirder sex toys out there (don't judge me, I was researching the market! haha). Chances of you finding a better deal on DHG for a single mattress shipped all the way from China are very unlikely. I'd say check Amazon and eBay, they might provide better alternatives, or at least more extensively reviewed products (that's how I chose my mattress and I'm never doing it another way again).


giphy.gif


Thank you @sunshinestore. Finally a vendor I trust selling something I want. SOLD!

Buying it right now..... hmmm, what else do I want :lol:

Was really into this one until I took a little while to consider the quality of most Chinese honeycombs. Granted, I haven't gotten one in a long while, but they're not known for great consistency in their percs. My PHX HD can get chuggy enough and it's made perfectly, I don't want to deal with the drag of a poorly drilled honeycomb. I wish they'd just copy Steven's straight fab perc, or just use the perc they used for their latest klein. Actually I might be thinking of CCG's latest klein, they have pretty much this exact piece. But yeah, if this thing had that style of perc I'd have been all over it.

In related news, I've had this sample made by a new DHG seller. I ordered a $20 straight fab from him for shits and giggles and it was actually pretty sweet, besides the fact that he had only used 2 holes (or rather a straight hole through the piece) for the middle section, so on one side the spacing is good, but on the other all 3 holes line up vertically. It still functions well and is a great mini fab, smaller even than Steven's. Almost small enough to make a pendant rig, though it would be unwieldy. Anyway. I'm getting off track. I contacted the seller about the perc spacing and suggested he make a slightly larger version and this is what he came up with. It's on it's way for closer inspection. :brow:
other_1075831047_00.JPG


More news that I forgot about. That Yingmin (GB-whateverthefuck) 8 arm to 12 arm shrub perc piece is dank as fuck. It does need a joint support, but it shouldn't be an issue unless you violently smack the base of your Steven straight fab into the bottom of the Yingmin's joint arm when you're grabbing it off the table. Anyway, the Yingmin piece is so good that I immediately ordered another. So there's my review, don't be stupid and the lack of a support won't matter, but the addition would make it a perfect piece in my book. The broken piece is still intact enough to stick a whip into the top of the lower perc, so whenever I get the herbie I've been looking at, this will probably become my dedicated herbie piece.
 
Last edited:

cybrguy

Putin is a War Criminal
I want to find something smaller than the 2020 to use with my arizer solo. Can't have too much drag. I'm thinking about this one, any other ideas?
A lot of us just use an Ash Catcher with a J-Hook and it ends up looking a lot like your image. I have my J-hook and a couple A/Cs in my sig, but it could be ANY A/C.

Edit: Like this
IMG_2044.jpg
 
Last edited:

Frederick McGuire

Aggressively Loungey


My guess would be that the 707 didn't sell well (Still don't recall a report of anyone buying a 707 yet...), Steven offloaded a bunch of them to another seller in a bulk order, and now that seller is undercutting him a bit...

I think I remember reading that he will also sell lower quality ones that don't pass his QC to other sellers :\
(but that could have been another seller :shrug:) so they might be the particularly janky 707s...

I'd be interested to hear the verdict if anyone pulls the trigger though :)
 

Cjisohsocool

Well-Known Member
A lot of us just use an Ash Catcher with a J-Hook and it ends up looking a lot like your image. I have my J-hook and a couple A/Cs in my sig, but it could be ANY A/C.

Edit: Like this
IMG_2044.jpg

Wow I can't believe I never thought of doing that! Out of the a/cs you have which has the least drag?
 

J_ackson

It's always sunny in Colorado
My guess would be that the 707 didn't sell well (Still don't recall a report of anyone buying a 707 yet...), Steven offloaded a bunch of them to another seller in a bulk order, and now that seller is undercutting him a bit...

I think I remember reading that he will also sell lower quality ones that don't pass his QC to other sellers :\
(but that could have been another seller :shrug:) so they might be the particularly janky 707s...

I'd be interested to hear the verdict if anyone pulls the trigger though :)

I also thought that this was the case as it happens all the time on DHGate but the title says 14.4mm joint and Steven only has 18mm.... so who knows?

I'm tempted but I will wait till the damn exchange rate stops fucking us over with 26% added to every damn purchase I make on DHGate/eBay. I'm tired of this crap eh.

Those guys are very creative but this sums up most of the stuff coming out recently, it's percs being put upside down, vertically, horizontally, etc. They need to think a bit before listing upside down percs because the water get's sucked in it and they don't seem to water test everything coming out of their own manufacture.
2015-new-glass-healthy-fashion-glass-bong.jpg


http://www.dhgate.com/product/2015-...-glass-bong/246150034.html#s6-5-7b|1695024768

An other example, a honeycomb in the middle of the tube?!? It has no purpose at all except to make the price be higher for the customer lol
I like the rather unique color of the bong, it makes me think of the 70s :leaf::lol:
amber-oil-rigs-glass-bongs-14mm-to-18mm-flush.jpg

http://www.dhgate.com/product/whole...glass-water/200523119.html#s1-0-1a|2631526738
 
Last edited:

wildything

Well-Known Member
The second 1 Is very similar to the dcycler but they didn't put the funnel down all the way through the perc and out the bottom of the perc. This caused bubbles to go up the return tube. One of the sellers put up a function video that was just horrible and I'm glad I didn't buy it bc it was pretty cheap on cnmengglass.
 
wildything,

MGG

Well-Known Member
The second 1 Is very similar to the dcycler but they didn't put the funnel down all the way through the perc and out the bottom of the perc. This caused bubbles to go up the return tube. One of the sellers put up a function video that was just horrible and I'm glad I didn't buy it bc it was pretty cheap on cnmengglass.

oh yeah i just noticed that, lol what a fail, would of been an alright piece if they didn't do that.
 
MGG,

twentypast4

#nycdabber
Really tempted to order the FC-Donut before the FC-710, not sure but first I'm going to order a dropdown/14mm male 3mm thick banger from HymanQuartz01.
 
twentypast4,

weenstoned

Well-Known Member
Just saw that, almost feel bad as they were just released on the weekend at chalice. Even with possible 21 day lead time you'd probably get it before the legit ones hit most shops. Not sure it's a must buy though without seeing the function. Hitman don't even have a function video on their Instagram feed yet.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
http://www.dhgate.com/store/product/new-hitman-glass-sundae-stack-glass-oil-rigs/247307863.html


CCG on top of the new hitman sundae stacks. hopefully a vid will come soon enough
Just saw that, almost feel bad as they were just released on the weekend at chalice. Even with possible 21 day lead time you'd probably get it before the legit ones hit most shops. Not sure it's a must buy though without seeing the function. Hitman don't even have a function video on their Instagram feed yet.
Those pictures on there are from Chalice, you can see it on the banners in the background of the pictures lol.
 

Frederick McGuire

Aggressively Loungey
Not too sure how the 1st one would function :hmmm:

It'd either perc up the up(return?)tube then settle on the turbine, or spin up through the turbine and maybe fall back down the return(up?)tube?

It'd be interesting to see a function video
 
Frederick McGuire,

NimbusVapor

Well-Known Member
Im stoked, finally ordered the fc70 after all the rave reviews and it is out for delivery today . Im not usually a fan of pieces with not much diffusion but Im really gonna give this one a chance. Ill post up my first impressions tonight.
 
Top Bottom