Discontinued The Persei Vaporizer for herbs and concentrates.

DieHard

Accessory supplier
Accessory Maker
I got the Herc Prototype Chamber. It will be put through its paces tomorrow. For now , here's a pic. The air flow holes have been moved from the bottom of the chamber to the sides. The 3 bottom airflow holes are closed. There are also 5 ceramic disc wicks. These are to stack on the heating Rod, replacing the SS or Ti sponges. :worms::science::tup:
ePwjsbf.jpg
 

Darb

Well-Known Member
I got the Herc Prototype Chamber. It will be put through its paces tomorrow. For now , here's a pic. The air flow holes have been moved from the bottom of the chamber to the sides. The 3 bottom airflow holes are closed. There are also 5 ceramic disc wicks. These are to stack on the heating Rod, replacing the SS or Ti sponges. :worms::science::tup:
ePwjsbf.jpg
That seems much better. I look foreword to no leaks and ceramic discs.
 

Fredster951

Well-Known Member
I got the Herc Prototype Chamber. It will be put through its paces tomorrow. For now , here's a pic. The air flow holes have been moved from the bottom of the chamber to the sides. The 3 bottom airflow holes are closed. There are also 5 ceramic disc wicks. These are to stack on the heating Rod, replacing the SS or Ti sponges. :worms::science::tup:
ePwjsbf.jpg
Looking forward to your review on this. Thank you @DieHard
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I got the Herc Prototype Chamber. It will be put through its paces tomorrow. For now , here's a pic. The air flow holes have been moved from the bottom of the chamber to the sides. The 3 bottom airflow holes are closed. There are also 5 ceramic disc wicks. These are to stack on the heating Rod, replacing the SS or Ti sponges. :worms::science::tup:
ePwjsbf.jpg

Actually the ceramic wicks I thought you where missing one in your Kiss Ac.
 

DieHard

Accessory supplier
Accessory Maker
Actually the ceramic wicks I thought you where missing one in your Kiss Ac.
:doh::doh::doh:
My bad. I got the wick with mine.:shrug: So I still use the SS or Ti. Or...:cool::science: Should I try the wicks in the Herc Chamber?
@THC SCIENTIFIC

Edit: maybe layer a wick, then a donut of oil, then another wick, another donut, etc. It was a broken glass AC globe that I clutzed, that I needed.
 
Last edited:

jagroat

Vaporizer Connoisseur
I got the Herc Prototype Chamber. It will be put through its paces tomorrow. For now , here's a pic. The air flow holes have been moved from the bottom of the chamber to the sides. The 3 bottom airflow holes are closed. There are also 5 ceramic disc wicks. These are to stack on the heating Rod, replacing the SS or Ti sponges. :worms::science::tup:
ePwjsbf.jpg

I can't wait!!! That look awesome, I like the small updates and @DieHard knows his stuff!
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
:doh::doh::doh:
My bad. I got the wick with mine.:shrug: So I still use the SS or Ti. Or...:cool::science: Should I try the wicks in the Herc Chamber?
@THC SCIENTIFIC

Edit: maybe layer a wick, then a donut of oil, then another wick, another donut, etc. It was a broken glass AC globe that I clutzed, that I needed.

Not saying you can't use it, just saying the Ti coils are more form fit. Try it both ways. Ti coils > ceramic wicks

As for Kiss Ac globes we'll get them next Friday.
 

elmoe420

Well-Known Member
I got the Herc Prototype Chamber. It will be put through its paces tomorrow. For now , here's a pic. The air flow holes have been moved from the bottom of the chamber to the sides. The 3 bottom airflow holes are closed. There are also 5 ceramic disc wicks. These are to stack on the heating Rod, replacing the SS or Ti sponges. :worms::science::tup:

Awesome!!! I am so excited to try this as I primarily use CO2 oils which are fairly viscous at room temp. Please post a review ASAP!
 

mixchu69

Well-Known Member
What is 601 ego? Will that work on my omicron lite and persei? Or do I need 601 mod? I am asking for the new kiss carts.

Is it time to buy the nibbler xl with the 40% discount?
 

DrRishi

Well-Known Member
I would really like to make use of the 40% discount but the W9tech site keeps telling me I cannot order from my address. I have created a ticket for the issue but no joy yet.
I have tried using a different browser and a different device to access the site but no success.

I tried filling in addresses from other countries like the UK and Belgium and i get the same result. The only country I could get it to work for is the US

Does anyone know a work around?
 
Last edited:

DieHard

Accessory supplier
Accessory Maker
Ok good news on the Herc testing. After trying to get started with the Herc testing I have found the problem I was having. The rod in my 71 was reading 19,000 ohms, so no good. This is the rod I got with my most recent 71 purchase. Lucky I have a spare sitting around so the testing can proceed. But for now I have to go see the Minions. Edibles after a few dabs then out the door.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Ok good news on the Herc testing. After trying to get started with the Herc testing I have found the problem I was having. The rod in my 71 was reading 19,000 ohms, so no good. This is the rod I got with my most recent 71 purchase. Lucky I have a spare sitting around so the testing can proceed. But for now I have to go see the Minions. Edibles after a few dabs then out the door.

You tested the rod inside the herc and got the reading of 19k or outside by itself?
 
THC SCIENTIFIC,

elmoe420

Well-Known Member
I recently picked up a temp control mod and want to give it a try with my various W9 carts. Interested to see how temp control can improve on a taste that is already amazing! Anyone know where I can find a 510 to 601 adapter?
 

Fredster951

Well-Known Member
I recently picked up a temp control mod and want to give it a try with my various W9 carts. Interested to see how temp control can improve on a taste that is already amazing! Anyone know where I can find a 510 to 601 adapter?
What is this temp control about?? Also @DieHard keep us updated on that Herc option testing!!
 
Fredster951,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
What is this temp control about?? Also @DieHard keep us updated on that Herc option testing!!


Temp control in the ecig battery is basically based on this design.

http://fuckcombustion.com/threads/the-8-herb-vaporizer-for-the-persei.5653/

When we started developing this device we ran out of funds and came into limitations of what China can produce as they where not even interested in the herbal market.

We simply did not have the resources and funds at that time to spend on further miniaturizing the 8 so that it can fit into current versions.


At that time we didn't connect the dots on applying this technology to a cartridge and have since paid the price.

Oh well.

We won't make that mistake in the future.

You can check out our prototypes on our photobucket page.


The only reason I am talking about this is because people like to talk trash and claim things, one thing I won't allow is some other companies to take credit for work that someone else did.


And yes temp control is now becoming the standard.
 
Last edited:

portezbie

New Member
Just ordered a Kiss Alpha Centauri because of the sale. Does anyone know if i will have any problem using the alpha centauri with a subohm variable voltage battery (smokjoy cfiber 30w), assuming i keep the voltage at 3.7? Also, is there any wiggle room to turn it up or down a little, or is that not recommended? I am specifically thinking about the 1701 ceramic atomizer.

Thanks
 
portezbie,

DieHard

Accessory supplier
Accessory Maker
You tested the rod inside the herc and got the reading of 19k or outside by itself?
19K was bare Rod on the bench. put in the spare and back in business. I m starting with a SS coil. It reaches to the top of the rod. It requires a significant buffer and I haven't quite got it to the sweet spot. Got a few good hits then need to load more. Stay tuned...
 

Fredster951

Well-Known Member
Temp control in the ecig battery is basically based on this design.

http://fuckcombustion.com/threads/the-8-herb-vaporizer-for-the-persei.5653/

When we started developing this device we ran out of funds and came into limitations of what China can produce as they where not even interested in the herbal market.

We simply did not have the resources and funds at that time to spend on further miniaturizing the 8 so that it can fit into current versions.


At that time we didn't connect the dots on applying this technology to a cartridge and have since paid the price.

Oh well.

We won't make that mistake in the future.

You can check out our prototypes on our photobucket page.


The only reason I am talking about this is because people like to talk trash and claim things, one thing I won't allow is someone other companies to take credit for work that someone else did.


And yes temp control is now becoming the standard.
I remember reading about the original 8 design. Such a long time ago. Everyone talking about temp control these days. All I own is w9 stuff so I am out of the loop for new adopted technology in the e cig industry. Good post @THC SCIENTIFIC
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I remember reading about the original 8 design. Such a long time ago. Everyone talking about temp control these days. All I own is w9 stuff so I am out of the loop for new adopted technology in the e cig industry. Good post @THC SCIENTIFIC

We don't have the funds to bring all our technology to market fast enough and anything we develope China companies share with other companies as IP belongs to the people not one company.

In other words we R&D things that China shares that with other companies we can't secure our IP there and that's what she wrote.

In other words we are moving away from the Chinese bs and have stopped all R&D Past 2015. Let these so call companies here spend R&D funds. Fuck them all re packing mofos.

Reason why IRIS has been put off is because we develope and its circuit boards pop into ecigs faster then we can do anything.

Remember there are many ecig makers who get the circuit boards from one or two different manufacturers. So it's all shared.
 
Top Bottom