Discontinued The Persei Vaporizer for herbs and concentrates.
- Thread starter THC SCIENTIFIC
- Start date
momofthegoons
vapor accessory addict
@kernal6500 since you have decided that the W9 Tech stuff isn't for you, I suggest you move on to another thread. Any further comments from you regarding your dissatisfaction or arguing with W9 will be considered company bashing and earn you a point.
kernal6500
Well-Known Member
Point issued for discussing moderator decision
@kernal6500
I dont know but this sure looks like a ceramic disc
So yes the design is ours.
Original post on
http://fuckcombustion.com/threads/t...erbs-and-concentrates.5772/page-4#post-217814
Originally talked about in 2011
http://fuckcombustion.com/threads/omicron-vaporizer-for-oils.4301/#post-177536
Also I like the fact that you want our ceramic wicks to be used on the same atomizer thats based on our designs.
posted about 3-4 years ago here on FC.
i would also like to point this out.
Posted on September 2014
and a comment on that video.
So all in all. We inspire everyone.
I dont know but this sure looks like a ceramic disc
So yes the design is ours.
Original post on
http://fuckcombustion.com/threads/t...erbs-and-concentrates.5772/page-4#post-217814
Originally talked about in 2011
http://fuckcombustion.com/threads/omicron-vaporizer-for-oils.4301/#post-177536
Also I like the fact that you want our ceramic wicks to be used on the same atomizer thats based on our designs.
posted about 3-4 years ago here on FC.i would also like to point this out.
Posted on September 2014
and a comment on that video.
So all in all. We inspire everyone.
Last edited:
kernal6500
Well-Known Member
Thank you
He was told that further posts would be seen as company-bashing, which it would be under our rules. Our rules also say:
- Public discussions of staff decisions are not permitted on the site. If you have any concerns or queries relating to a staff decision please take it up in private with a staff member.
jsnstanley
Well-Known Member
Just received the Black ceramic wick replacing the missing one from my AC kit. Sent along a few extra too. Thanks guys!
SamuraiSam
Extraction Technician
Happy to help @jsnstanley ! Thanks for your patience.
We have received the replacement wicks and have mailed them out or issued store credits to everyone I'm aware of who was missing a 1701 wick with their Alpha Centauri kits. I updated each support ticket regarding missing donut wicks with shipping information a few days ago; if you were missing a wick and haven't heard from me, please add a comment to your ticket so I can get your kit made whole.
Hopefully I didn't miss anyone
We have received the replacement wicks and have mailed them out or issued store credits to everyone I'm aware of who was missing a 1701 wick with their Alpha Centauri kits. I updated each support ticket regarding missing donut wicks with shipping information a few days ago; if you were missing a wick and haven't heard from me, please add a comment to your ticket so I can get your kit made whole.
Hopefully I didn't miss anyone
The KISS Alpha Centauri has been tested to work on every generation of Persei, as long as good quality batteries are used. (I personally have two Version 1 units that both power it fine). If your Persei has experienced a failure, regardless of its generation, our repair department would be happy to take a look at it. Have you opened a support ticket regarding this issue?
Nope... Only if it's over loaded, or you leave it hot (try some cool down draws to prevent leakage with any coils of the Alpha Centauri). Warm oil is always going to flow easily, and if there's an air hole at the bottom of your heating element, use common sense to maintain cleanliness.
masaki
Well-Known Member
pretty sure I use my common sense as often as any common situation. Kiss AC 1701 is not common to me so I'm asking.Happy to help @jsnstanley ! Thanks for your patience.
We have received the replacement wicks and have mailed them out or issued store credits to everyone I'm aware of who was missing a 1701 wick with their Alpha Centauri kits. I updated each support ticket regarding missing donut wicks with shipping information a few days ago; if you were missing a wick and haven't heard from me, please add a comment to your ticket so I can get your kit made whole.
Hopefully I didn't miss anyone
The KISS Alpha Centauri has been tested to work on every generation of Persei, as long as good quality batteries are used. (I personally have two Version 1 units that both power it fine). If your Persei has experienced a failure, regardless of its generation, our repair department would be happy to take a look at it. Have you opened a support ticket regarding this issue?
Nope... Only if it's over loaded, or you leave it hot (try some cool down draws to prevent leakage with any coils of the Alpha Centauri). Warm oil is always going to flow easily, and if there's an air hole at the bottom of your heating element, use common sense to maintain cleanliness.
Now can I dump the whole bottom adapter to my AC into ISO or should that be avoided and just wipe what's dirty with ISO?
You should get excited, as im testing the hand held version of the Flexo
Fredster951
Well-Known Member
I want more info on the Hercules optional new updates.
Diehard should have his package by now, wait for his info.
@thegoo we never left the topic.
Up Tech = controversial
As for the Flexo, wait for more news, we might do some changes for production but all parts are ready.
Fredster951
Well-Known Member
Hell yes! Always like diehard post reviews. Can't wait
man id love to try the new herc options but cant find anything in nj even if i could convince g to let me test lol
Fredster951
Well-Known Member
So I been using the Kiss AC almost daily with dual coil 7.4 set up. Ready to try the 1701 now. I can use this ceramic donut at 7.4 or 3.7?
you can use it what ever way you want.
on a side note since i like torturing people, if i have one youll get one. just send me a pm and bother me every other day until i say i dont have one.
Fredster951
Well-Known Member
Lucky!!!!! @lonelyhero
ArchVape
Princess of the Biscotti Republic
Captain didn't make the crunch. And the cow didn't make the milk. If I was on a cereal forum I'd prolly get a point
Is it normal for 1701 to leak through the bottom..?
I was getting alot of leaking out of the neg lead hole on the kiss cart 1701 and the AC kiss 1701. I tried cool down draws, tighting the neg lead lock ring. Harder to notice it on the AC kiss becasue of the housing but on the Kiss Cart can see it forming after each use. @masaki Did yours look like this?
Melting Pot
Sick & Twisted
My herc sr71 is so perfect I wouldn't change a thing.
My go to oil cart for on the go and extended stays in hospital my herc never lets me down.
Huge flavor hits
Can't get any better...
My go to oil cart for on the go and extended stays in hospital my herc never lets me down.
Huge flavor hits
Can't get any better...
If you have an 8 with dual 18650, might be pushing it with the dual 18350's but that thing should light up real fast for maximum cloud production even with the ceramic wick on it.