MGG
Well-Known Member
Sublimator is the vape for you then!
Discontinued Sublimator XLR
- Thread starter PlanetHaze
- Start date
Sublimator is the vape for you then!
A1FBG
Active Member
I just placed my order and before i contact planetvape sounding stupid i want to ask you guys about how much they charged me. It was 664 in canadian dollars, and it says 542 us dollars was taken out of my account. But when i do the conversion on google it says the 664 candian dollars is equal to 525 us dollars.
.. what happened? ..
.. what happened? ..
MGG
Well-Known Member
probz currency conversion fee or some shit? or the conversion you did didn't represent the current going rate of the Canadian dollar?
Its decided then. Im placing an order for the Sub
If i get a crave for the full flavor ill bust out the Evo and do some lo temp rips
But I really just want the super potent hits.. Fast extraction/less resistance is a big bonus too
Thanks helpin me pull the trigger. I'm itchin to get these hands on it
The sub is more than capable of doing the low temp as well as the high temps
Nobody gives a conversion at the current exchange rate. There is always a percentage fee for the service.
A1FBG
Active Member
Word. Preciate that quick reply.
Gotta watch for them hidden fees..
I mean its only a $17 difference tho
i won't give a fuck about that if this lives up to it's hype haha
Sublimator427
Well-Known Member
I was also surprised to read that someone is using 12 for flowers. Understandable for those that live in really cold areas. Down in South Florida the performance is exactly as advertised - Red lights (9-12) will ignite flowers. I'm actually able to run 9 if the AC is blowing in winter, but it's summer now and 9 started igniting again lol
Sublimator427
Well-Known Member
Semi-related thought. For anyone having issues having to crank the voltage up for proper extraction, it might help to invest in one of those little $10 electric tobacco grinders. It produces a grind that's so fine it makes extraction a lot easier on the heater. At level 8-8.5 it roasts resembling black coffee grinds, which I can only assume is as close to 100% vape extraction as is possible. Was never able to get that result with traditionally ground herbs.
Been Vapin
Fringe Class
All set up for the first Sublimator hit in 9 months.
Sitting around 33.5 to 34 Watts oh yes.
Sitting around 33.5 to 34 Watts oh yes.
@MGG Dabs are pretty ordinary. Torch and nail, old school.
So I pulled out the fluke for the facts.
Constant 36.8v through the temp range. ? They must be controlling the current to vary the temps rather than voltage regulation.
Heater 27.8 ohms.
I cant get a reliable temp with the infra red on the shiny surfaces.
So I pulled out the fluke for the facts.
Constant 36.8v through the temp range. ? They must be controlling the current to vary the temps rather than voltage regulation.
Heater 27.8 ohms.
I cant get a reliable temp with the infra red on the shiny surfaces.
canj00digit?
All my days in a daze...
Have crept all the way up to 8 for flowers now and that puts the ABV at VERY dark with one large hit and one 'clean up' hit.
The timer has only really annoyed me a few times. The egg timer reminds me well enough.
It makes a great container.
In no way could in replace your SCS.
Both my SCS and cheap Storz&Bickel grinder are far superior.
But, that's just like my opinion, man.
My new 'subbuddy' from OGB arrived today so I melted the sublimate out from the dropdown I was using. My first bit of sublimate, damn it's nice stuff especially when double decking:
Here is a pic of my new OGB dropdown/subbuddy:
The timer has only really annoyed me a few times. The egg timer reminds me well enough.
It makes a great container.
In no way could in replace your SCS.
Both my SCS and cheap Storz&Bickel grinder are far superior.
But, that's just like my opinion, man.
My new 'subbuddy' from OGB arrived today so I melted the sublimate out from the dropdown I was using. My first bit of sublimate, damn it's nice stuff especially when double decking:
Here is a pic of my new OGB dropdown/subbuddy:
I was glad that I asked OGB to make me a knockoff SubBuddy. I was sick of waiting for one to be back in stock and it really did turn out pretty flawless. I just wish I could get a functioning controller again. I'm on my 3rd time sending it back and the waiting for shipping back and forth is killing me.
A1FBG
Active Member
Thats got to be a pain physically and finacially.. Same happened with my Cloud Evo tho so its the luck of the draw to be honest. Hopefully you'll finally get a working unit this time around...
My Sublimator arrived today 2 days after purchase
i just don't have any glass to use it with right now..
but an adapter for my dab rig should arrive soon to help hold me over until i figure out what piece i wanna buy dedicated to the Sub 
@brucee10 I preferred the looks of the Sub buddy so i ended up going went with it as it was only like $5 more than OGBs. But what I'm getting to is where were you looking for one? I got mine on PlanetVape
My fault for the back to back post but i just now realized i was sent the titanium version when i had purchased the stainless steel. I wanted the stainless steel as i intended to use it with flowers mainly and i had read that would be the better choice for my situation. Should i get this fixed or should i just let it be? The titanium is $50 more but i read its meant more for concentrates
Mod note: posts merged
Last edited by a moderator:
Planet Vape was out of 18mm for quite a while and so was sublimator so I frankensteined for a while saw OGB.
zippy
Well-Known Member
I have a feeling my replacement one is not working as it should,as on setting 5 i get dark leftovers...What was wrong with yours again or was it 3 different faults?
Sublimator427
Well-Known Member
Yep, here's some Level 8 Roastage from the 4th of July festivities. If your AVB is like this or darker on lower levels, probably have an output issue.
Don't read to much into me hitting at full tilt as I had similar issues with the LSV.
@Sublimator427 that bowl shot needs a few more hits, I think I can still see green.
zippy
Well-Known Member
Sublimator427
Well-Known Member
@Sublimator427 that bowl shot needs a few more hits, I think I can still see green.
Oh trust me it's toast, the light is just shining directly on it. I'll have to get a better pic later tonight. And that's actually about 5 or 6 bowl shots in the pile, I pack my bowls like wine swigs instead of beer chugs
As for inconsistency, it seems to be the controllers and their power outputs. The Sublimator itself is just a big empty vessel. Maybe the new digital ones will solve the issue. In any case I guess I still just have to consider myself very lucky I got a good controller, I still have not had a single issue with it since original purchase late last year.
Last edited:
A1FBG
Active Member
A few beginner questions:
1) Are you supposed to leave the apollo on the atomizer to let it "preheat"?
2) Are herbs suppose to heat soak some after being loaded in the atomizer?
3) I received good clouds at setting 7. Setting 9 was bong like vapor rips i was looking for. Is my power outage performing okay?
1) Are you supposed to leave the apollo on the atomizer to let it "preheat"?
2) Are herbs suppose to heat soak some after being loaded in the atomizer?
3) I received good clouds at setting 7. Setting 9 was bong like vapor rips i was looking for. Is my power outage performing okay?
zippy
Well-Known Member
Answers to 1) thats how i do it but don't let them cool together as they will fuse due to atomiser cooling before the head.
2) mine did but its been acknowledged it may be faulty mine did it at setting 4 though.
3) No idea if you contact Sublimator direct they may have some advice.
2) mine did but its been acknowledged it may be faulty mine did it at setting 4 though.
3) No idea if you contact Sublimator direct they may have some advice.
MGG
Well-Known Member
1) yes (just dont leave it on when there's flowers still in the bowl, always cash after each hit otherwise
it will burn and effect flavor)
2) some say maybe 5 seconds, I'd say no not at all, great thing about the sub is you can load and hit it right away,
unless your material is particularly a bit wet/improperly cured, then i wouldn't suggest heat soaking your herbs.
3) seems fine to me, I usually don't do flowers on 9 because I think it's too hot, but I do double deckers (oil and flower on 9-10, usually I find juuuuussst under 8 to be the sweet spot for straight flowers for me
.Hope this helped.
