• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

NickDlow

Log Hog
I think the Us blowers will lower thier prices. There isn't a demand for china glass if the blowers lower their prices. People want american glass. It might be the only thing in their home that's actually 100% american, but they still want american glass. Very few are even willing to buy chinese once. They don't see any "art" in a piece made by a squatting 7 year old boy, but they do see art in the same piece made by an american. Even I feel this way, maybe everyone does. Sweatshops being run by orders don't really produce art. I sort of feel bad holding it even. I would be willing to pay $100 more just to have art instead of a "Chinese manufactured good". So american shops don't really have to worry about going under, however, we will start seeing lower prices soon enough.


9 out of 10 local shops I've been to sell Chinese glass at US glass prices. Also you're purely speculating on their work conditions.

So is every product made in China comes from a squatting 7 year old in a sweat shop? That's a lot of 7 year olds.
 

Deano

Well-Known Member
Last edited:
Deano,

_WaxPayne_

Well-Known Member
Hello FC :wave:

Sorry it took me so long to get some pics of the replacement pieces for my broken stereo matrix(fc-186) and broken Dabbacino from Steven. He did deliver them both though and separately too! Both came with no knicks, scratches, hairlines or blemishes to the glass. I included pics of the FC-1000 just because its my favorite DH piece :science: Please pardon the wax all over the Dabbacino and partially on the 186. Also not sure why tinypic uploaded most of em sideways....but in my current state of mind, they all look straight :nod::brow:

14dzfhl.jpg



qs2zi8.jpg



30j1bi0.jpg



2qb866h.jpg



2uz5imq.jpg



2mera4p.jpg



5nlu9f.jpg


Looking to get the FC-710 and the Straight Egg next from Steven.

Have a very safe and very good Fourth of July . Come back with all your fingers :tup:

IMO;
If you want it purely as a show piece and you like the spinning of the wheel - go for it.
If you want something spinning parts that's also highly functional, then join me in hoping eventually we will get some kind of propeller perc piece produced at some point :science:

That is amazing!!!!!:whoa: really hope it gets cloned or affordable soon ! It's like a carousel , bet it gets u just as dizzy too :haw:
 
Last edited:

ragnorak71

Well-Known Member
apologies if this has already been posted but i messaged about the fc 1000 and got the following when looking for assurances that i would get a v1 and not v2:


FC-1000 is V1,not V2,I will not produce V2,beasue many people like V1

Jane
 

A1FBG

Active Member
Everybody seem to love the FC1000. Is the size good or would you guys prefer a somewhat smaller version?
 
A1FBG,

mrgohamilton

Well-Known Member
I'm looking to get a FC 1000 or 707, a v2 FC UFO, and GB 194 (toro clone). Still on the fence with straight fab.

Also looking to pick this up from dhgate.

http://m.dhgate.com/product/two-wheel-unicycle-with-key-remote-control/231961671.html#pd-024

rBVaHFVQIDOAd2IBAAWcJYO40cI161.jpg


Lol
U
Or could always go with the LHS version for $1499 vs $338
https://phunkeeduck.com/purchase/

im in the market for one of these guys too lol after checking the prices these things. might just have to try one out!
 

A1FBG

Active Member
I'm looking to get a FC 1000 or 707, a v2 FC UFO, and GB 194 (toro clone). Still on the fence with straight fab.

Also looking to pick this up from dhgate.

http://m.dhgate.com/product/two-wheel-unicycle-with-key-remote-control/231961671.html#pd-024

rBVaHFVQIDOAd2IBAAWcJYO40cI161.jpg


Lol

I can't believe they sale those..

Id go with the Fc1000 over the 707 just because of the splash back possibility plus i feel like the vapor could build up more before it reached your mouth.

Im mainly debating between the FC1000 and FC710. Straight Fab and Gb194 would be my next on the list.

Decions decisions.
 

EverythingsHazy

Well-Known Member
Everybody seem to love the FC1000. Is the size good or would you guys prefer a somewhat smaller version?

Yea, I'm glad it's been getting such positive reviews on here.

I'd personally leave the design as is, since they seem to have gotten it down pretty well. Plus, there aren't many great, large pieces on dhgate, so the pillar offers a nice change.

i see most clear glass as a utensil or a tool, if i want art i'll go heady but that's just me
I agree. A nice handmade, colorful, or at least very intricate, custom piece would be some cool art, but mass produced clear pieces, I see as tool.
 

A1FBG

Active Member
Any opions on the FC711 (mini pillar)?? The only thing i don't like is the sidecar mouthpeice. The FC1000 it just looks so large for vapor..

The Binary matrix video was uploaded. Still wondering when it will be for sale..
 
Last edited:

ragnorak71

Well-Known Member
I am being a good little Rag, i will not order the fc 1000 until the underdog turns up. dont think i can justify it with the solo
 
ragnorak71,

A1FBG

Active Member
Does the faberge section act as a recycler making the vapor contact water more than once? Also what is the benefit of more swiss holes?
 

wildything

Well-Known Member
The holes in the fab egg makes the bubbles bounce around more and stay in contact with the water longer. While it cools the water like a recycler it will give a slightly different hit, in a good way.
 

pigfoot

Dabs are vapor too!
Is something up with DHgate? Tried to find some of the pieces I bought, they come up, but the link to the store is broken. Kathy, Sunshinstore, are they gone?
 

pigfoot

Dabs are vapor too!
Top Bottom