• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

In what instance would I use a diffuser pump or the mobius binary matrix clone? (getting ready to add to the family)
 
ragnorokk,

East808

New Member
So I picked up a d020-d from SSS a while ago. My main issues with it is:
(a) glass nail dumps my oil
(b) tough to rig a pen up to it without using a wick or rubber/silicone seals

To combat the first issue, I figured I'd replace the nail. The top of the invluded nail is shaped poorly, and basically funnels my oil out a spout. I end up getting no vapor in my hit and having beautiful golden concentrate all over the inside of my rig. Should I get a nail for the included dome and adapter, or go domeless? Is the advantage to domeless the ability to carb cap? Are DHgate nails worth exploring?

I would definitely buy a new nail asap. There are some on DHGate worth exploring. I went with Quartz Bangers from Kathy to try out and I love it more than Ti. I got the 4mm quartz bangers on order from JLHsmoking now. I got a universal Ti domeless nail from Kathy also that I like. Although, some may be wary of purchasing Ti from China, so even moreso I'd grab quartz banger.

I haven't tried any nail that need a dome... But I've tried the free glass nail and its rubbish.

Edit: I was unable to find a ceramic nail design I liked after 3 nails. Wouldn't suggest you explore these unless someone else can suggest one.
 
Last edited:

East808

New Member
tuMcG post: 815452 said:
i have yet to receive an answer on the purpose of this perc
I've been wanting to pick up the fc-710 also, but couldn't understand the function lmfao.
However, @FrederickMcGuire's post after yours, finally paints the picture for me ha-ha. Thanks for that bro!

Edit: Who's got the best dropdowns/reclaimers on DHGate? Need to get 4 to help keep the rigs clean :(

Edit2: My Straight Fab finally tracked 7/1! Ordered 6-12/13. A bunch longer than the ~10days it originally said it was gonna ship out, but I don't mind. (Not sure, but I think I read someone bought one after me, and it shipped b4 mine.) Can't wait! Hope it arrives alive!
 
Last edited:

slatihe

Well-Known Member
What's the best China rig for nano? Kinda want something that recycles. ... in cycles. .. something petty and maybe small?
 
slatihe,
  • Like
Reactions: snamuh

A1FBG

Active Member
No slits.

It's basically kinda a natural perc up the inner up stem bit.

Purpose?
"A bit more than super low diffusion, with a very small amount of dry surface area for reclaim to form on."
Would be my rough description of it...

For me it definitely smooths out dabs more than my tiny rigs with a natural perc or a 1-2 hole/slit Diffy...
I guess it's because the pillar effect of the upstem allows more water contact time or something?

It retains flavour really well.

All that water volume means the water doesn't go stale for a longer time.

The effective volume (basically just the downstem and the area of the can/neck that doesn't hold water) of the piece is actually quite tiny.

It is one of my favourite pieces for dabs, and I generally prefer the maximum amount of diffusion possible (I used my LSV today in a setup involving a hydra base and 3 hydratubes stacked :D)

I think I have found my Sublimator glass i have been searching for. Finally. Large heavy sturdy base. Just hoping the natty perc is enough diffusion :\
 
A1FBG,
710=OIL. The FC-710 is a great dab rig with minimal diffusion and small volume for great flavor retention.
So what would be the purpose of the matrix? Is that for flower? Combustion?

I would definitely buy a new nail asap. There are some on DHGate worth exploring. I went with Quartz Bangers from Kathy to try out and I love it more than Ti. I got the 4mm quartz bangers on order from JLHsmoking now. I got a universal Ti domeless nail from Kathy also that I like. Although, some may be wary of purchasing Ti from China, so even moreso I'd grab quartz banger.

I haven't tried any nail that need a dome... But I've tried the free glass nail and its rubbish.

Edit: I was unable to find a ceramic nail design I liked after 3 nails. Wouldn't suggest you explore these unless someone else can suggest one.
Thanks, mano. I see the 4mm thick ones cost significantly more, but I intend to buy the quartz banger/carb cap option from jlhsmoking. Their Ti nail combo looks nice, too.
 
Last edited:
ragnorokk,
  • Like
Reactions: East808

Frederick McGuire

Aggressively Loungey
Nothing like stacking tubes for MEGA HITS!! My GBD Fritter is always the middle piece!!
It was the middle HT! :lol:

Bottom - hydra foot
Bottom HT - removable MP HydraCirc
Middle HT - cbd fritter
Top HT - swagger puck

'Twas ridiculous :lol:
I have the GBD fritter, it has an 18mm female outlet for attaching the mouthpiece.
I put a m2m in there to allow a ht on top.
Placed my swagger puck on top of that.
Underneath it all was my new HydraCirc with removable MP from @canj00digit?
:D
I think I have found my Sublimator glass i have been searching for. Finally. Large heavy sturdy base. Just hoping the natty perc is enough diffusion :\
I've used my sub with it, it's a nice combo.
I'd prefer something with more diffusion for regular use, but every now and then it's a really fun pairing :brow:

Imo it is similar to a natty perc but better.
I have a tiny Klein bottle style natty perc rig from kathy, and the 710 is much smoother than it...

So what would be the purpose of the matrix? Is that for flower? Combustion?
high diffusion - Generally less desirable for oils, but perfectly fine to use if you want to smooth the hit out.

I'd say it'll be generally suited for flowers, but it should be good for just about whatever you want to put through it.
 

Monsoon

Well-Known Member
I think I have found my Sublimator glass i have been searching for. Finally. Large heavy sturdy base. Just hoping the natty perc is enough diffusion :\
If you're talking about the FC-710/Diffusion Pump, it will NOT work with the Sublimator. It has a 14mm male joint and is more of a hand held piece. For the Sub I'd recommend something like the FC-186 instead.
 

A1FBG

Active Member
If you're talking about the FC-710/Diffusion Pump, it will NOT work with the Sublimator. It has a 14mm male joint and is more of a hand held piece. For the Sub I'd recommend something like the FC-186 instead.
An adapter can fix that. Not a fan of the knock off stereo matrix. I do like that binary matrix tho :bigleaf:
 
Last edited:
A1FBG,
  • Like
Reactions: turdhole

A1FBG

Active Member
All I gotta say is damn:clap:
other_1066339864_00.jpg

other_1066339951_00.jpg

For a prototype this thing is done really well. The mouthpiece could be a smaller diameter and there needs to be joint support.

Do you know around when this will be released?
 
A1FBG,

dabsonthemountain

Well-Known Member
Last edited:

A1FBG

Active Member
I know there will always be American glass supporters for the high end name brands but do you guys think this growing chinese glass market is going to take over and put other glass blowers out of business or forced to lower their prices.

I think so to be honest
 
A1FBG,

NickDlow

Log Hog
I know there will always be American glass supporters for the high end name brands but do you guys think this growing chinese glass market is going to take over and put other glass blowers out of business or forced to lower their prices.

I think so to be honest

Hopefully the latter of the two. Lower those damn prices! Tho I have found reasonably priced American glass IMO (200-500). I can stomach that but 1500 to 2500 is obnoxious!!! That's almost my fuckin car payment for a year, no thanks. Take your crazyship elsewhere I'm all set thanks.
 

canj00digit?

All my days in a daze...
It was the middle HT! :lol:

Bottom - hydra foot
Bottom HT - removable MP HydraCirc
Middle HT - cbd fritter
Top HT - swagger puck

'Twas ridiculous :lol:

I have the GBD fritter, it has an 18mm female outlet for attaching the mouthpiece.
I put a m2m in there to allow a ht on top.
Placed my swagger puck on top of that.
Underneath it all was my new HydraCirc with removable MP from @canj00digit?
:D

Damn! I bet my old HydraCiric sure is glad to go to it's new home. It lived a boring life with me, and already now it's having tower of ménage à trois with your glass line up! :D
 

turdhole

vagabond
I know there will always be American glass supporters for the high end name brands but do you guys think this growing chinese glass market is going to take over and put other glass blowers out of business or forced to lower their prices.

I think so to be honest

i hope so. american clear glass prices are outrageous and the clear glass blowers seem to be the ones bitching most about the chinese, i dont see a lot of headie artists complaining much about china.

i feel like the clear glass artists are running a constant smear campaign against china for 2 reasons: fear of how good the chinese are getting and the chinese are exposing how little it actually cost to make this shit

keep up the good work china
 

snackmaster

Well-Known Member
the chinese are exposing how little it actually cost to make this shit

The cost of doing business for an individual (without a big name) or small US company is way different than Chinese shops though. While I enjoy Chinese glass, I think it's gotta hurt individuals and smaller shops more so than the premium brands charging truly outrageous prices.
 

turdhole

vagabond
The cost of doing business for an individual (without a big name) or small US company is way different than Chinese shops though. While I enjoy Chinese glass, I think it's gotta hurt individuals and smaller shops more so than the premium brands charging truly outrageous prices.

i'd be willing to bet that most individual blowers are operating without a business license and whatever other crap you're supposed to have in the US and every company is cooking the books and using whatever loop hole they can to get out of paying more taxes. i dont feel sorry for them
 

snackmaster

Well-Known Member
i'd be willing to bet that most individual blowers are operating without a business license and whatever other crap you're supposed to have in the US and every company is cooking the books and using whatever loop hole they can to get out of paying more taxes. i dont feel sorry for them

Maybe, but equipment, materials, workspace, acquiring the skill, design time, etc all cost $$$ and that adds up. Might see fewer blowers getting into scientific glass in the US because even with really slim margins they can't compete. Is that a positive consequence? Doesn't seem like it.

Anyway, just my :2c: and I'll shut up now.
 

dabsonthemountain

Well-Known Member
I think the Us blowers will lower thier prices. There isn't a demand for china glass if the blowers lower their prices. People want american glass. It might be the only thing in their home that's actually 100% american, but they still want american glass. Very few are even willing to buy chinese once. They don't see any "art" in a piece made by a squatting 7 year old boy, but they do see art in the same piece made by an american. Even I feel this way, maybe everyone does. Sweatshops being run by orders don't really produce art. I sort of feel bad holding it even. I would be willing to pay $100 more just to have art instead of a "Chinese manufactured good". So american shops don't really have to worry about going under, however, we will start seeing lower prices soon enough.
 
Last edited:
Top Bottom