share that dab stash! (picture thread)

whats your favorite kind of concentrate?


  • Total voters
    520

herbivore21

Well-Known Member
By the way, thanks so much for your response @Hashtag46&2 , sorry I haven't had a chance to get back yet, I am now inundated with work and won't be able to post detailed responses. Cheers though! Also lovely looking shatter there my friend!

I produce my shatter with my own proprietary custom heat purge rig, no vac required. I use isopropyl and ethanol as my solvents though, not butane. I have not ever used butane lol

Thanks for the kind words and likes on my latest run too everyone, I'm tempted to hold off on dabbing any of that latest shatter until my SiC dish gets here from dnail lol, it is just too tasty to sacrifice to even quartz.

Wow I've become a dab snob! hahaha

Hmmm I think I need to get myself some bags finally and start making bubble myself too! Hashtag I think you have inspired me bro :D
 

BoogerMan

Well-Known Member
Yo BM....
Thank you so much man, I appreciate the warm welcome and the kind sentiment .

I haven't had the pleasure of seeing CubanGrower's work yet. But sounds like I should check him out.

I should mention, I do not partake in IG,Facebook,Twitter etc...

Only Cannabis Forums, even though I'm 100% compliant in my state , I still do not like traditional Social Networking, due to Cannabis laws on the Federal level.

Don't know if you're familiar with DSW (Dry Sift Wizard).. But he is the man that got my attention regarding 99% Heads.

I've been saying for the last two years, Dry Sieve will eventually be the proverbial "Holy Grail " of the Concentrate Community.

Okay guys, my DBV is calling my name, more pics and chats in the morning.

Much love FC!

Hey @Hashtag46&2!

Agreed about social media! I am also doing everything legal on my state level, but I still like to be careful. I only have an IG to follow others and see all of the good stuff!

Loving the pics of the old bho and the new full melt!

I checked out DSW and am now following him :tup: Really good stuff! I'm gonna have to try that 10 second sift!

I have been seeing some really nice dry sift/ice water extraction (and just some really potent bud) put in Rosin Tea Bag Filters and pressed into some beautiful oil. I think this is my next endeavor after I run out of butane and have enough money for some sifting screens or bags, ice water bubble hash machine (or whatever is best), heat press, etc. If I really like the solventless route and the rosin I may really have to save up for some nicer pressure equipment.

Solventless extraction and low temp high pressure is where I want to be in the next 6 months if possible. I've had fun with solvents for the past couple of years, but I think it is time to try something new. For a while now I have been thinking about spending $2500 on an AI vac oven and new vacuum pump, but now I think I will use that $2500 (or however much) to invest in some nice solventless extraction equipment to attempt to make 99% heads and some amazing Rosin.

Anyways, @herbivore21 and @Hashtag46&2 I need a little help with the chemistry behind what the hell just happened to me the other night :science:

Okay so I needed to move a small plant into a bigger tent, but the bigger tent had a plant finishing in flower. The flowering plant was done and ready for harvest, and since I wanted to get the small plant in there, I forgot to check the soil of the flowering plant (which was going to be used for a fresh frozen bho run). I chopped down the flowering plant before I let the soil dry out (about 2 days too early) so there was quite a bit of water left in the plant material. I didn't really notice the excessive amount of water until I started packing the tubes and a little water was running out of the bottom :doh: I should have stopped right there knowing that too wet of material (even if frozen) does not process well with butane (at least I think I remember reading that somewhere).

Anyways, I froze the material for 48 hours at -5F and then attempted to blast it. Here is what happened. The butane was not really traveling through the tube. After pressing the butane can on and off on the tube for at least 10 minutes, a tiny bit of yellow goop started to form at the end of the tube. I could shake the tube and a little would fall off on the glass dish. But it was mostly turning to ice at the end of the tube. Like hanging icicles of yellow/white oil was forming at the end of the tube. I even let one tube thaw out completely and attempted to blast it just to make sure it wasn't too cold (I knew it wasn't but I just wanted to make sure the same thing happened with a thawed tube, and yep, the same thing happened).

After fighting this for about an hour I gave up and brought the small blob of oil inside to vac purge.

I unpacked the tubes and let the bud air out on a cookie sheet until it no longer smelled like butane. I took one of the buds and pressed it in a paper towel and there was so much water. It was crazy. So I brought it inside and set it on a reptile heating pad to help dry the bud (I honestly didn't know what to do at this point, but I didn't want to toss it because I knew there was stuff still left on it). I let it dry for 12 hours and then repacked the tubes. I did not refreeze them since at this point I figured even if I reblast it and it turns out horrible and tastes awful then I can just make some pills or edibles with it. So I was just kind of over it all lol. No worries :tup:

Anyways, the second run turned out amazing.

Here is a pic of the first batch (crappy oil) on the left and the second batch (good oil) on the right. I'm sure you could tell haha :ko:

2AEC86EF-BCB1-4FE0-9D70-1E73EFFFC119_zpswelsy2w0.jpg


The first crappy batch finished purging in just 24 hours with 2 flips. It weighed out to about 2g. It has a shatter like consistency but is very cloudy and dark. It tastes horrible. Tastes like I hit a blunt :puke:The room smelled really bad for a long time after. It was a decent size dab too, but the amount of vapor I blew out was tiny. I knew something went wrong, so I checked out the nail and I noticed some black ash left from just that one hit. It didn't fully melt. It is maybe like a 1/2 melt, if that. This will be used in a batch of edibles :brow:

The second good batch of shatter has sort of a flora taste so it's a little strange but not bad at all. Pretty strong too. I actually kind of like it :D

Okay so @herbivore21 and @Hashtag46&2 here are some questions that I am hoping one or both of you may be able to answer. Thank you in advanced :tup:

The wet material was obviously the problem. I will make sure my soil is dry before chopping (if doing fresh frozen) to avoid this ever happening again lol :wave:

Why does wet plant material not work well with butane (even if the material is frozen)?

Does the moisture freeze over the trichomes in the freezer and when the butane touches it, causing mostly only chlorophyll, plant fats, lipids, waxes, etc to come out the end of the tube at the beginning before the end froze over? (That is the only thing I could think of that made reasonable sense as to why my dab tasted like a blunt and did not fully melt/left black ash).

If the 2g of poo oil is really mostly chlorophyll, plant fats, lipids, waxes, etc then is my 6g of good oil kind of dewaxed/winterized? Did I somehow just accidentally come up with a crappy dewax/winterization method? :rofl:

Here are some more pics of the good oil. It has about 24 hours left and 2 more flips :tup:
E0AAA38C-83FA-40CF-A073-92B5281AB0E0_zpsdqgcrr1s.jpg

1F952FC2-F54C-48C4-8FB9-09AF459F0126_zpsqznismcj.jpg
 

herbivore21

Well-Known Member
Hey @Hashtag46&2!

Agreed about social media! I am also doing everything legal on my state level, but I still like to be careful. I only have an IG to follow others and see all of the good stuff!

Loving the pics of the old bho and the new full melt!

I checked out DSW and am now following him :tup: Really good stuff! I'm gonna have to try that 10 second sift!

I have been seeing some really nice dry sift/ice water extraction (and just some really potent bud) put in Rosin Tea Bag Filters and pressed into some beautiful oil. I think this is my next endeavor after I run out of butane and have enough money for some sifting screens or bags, ice water bubble hash machine (or whatever is best), heat press, etc. If I really like the solventless route and the rosin I may really have to save up for some nicer pressure equipment.

Solventless extraction and low temp high pressure is where I want to be in the next 6 months if possible. I've had fun with solvents for the past couple of years, but I think it is time to try something new. For a while now I have been thinking about spending $2500 on an AI vac oven and new vacuum pump, but now I think I will use that $2500 (or however much) to invest in some nice solventless extraction equipment to attempt to make 99% heads and some amazing Rosin.

Anyways, @herbivore21 and @Hashtag46&2 I need a little help with the chemistry behind what the hell just happened to me the other night :science:

Okay so I needed to move a small plant into a bigger tent, but the bigger tent had a plant finishing in flower. The flowering plant was done and ready for harvest, and since I wanted to get the small plant in there, I forgot to check the soil of the flowering plant (which was going to be used for a fresh frozen bho run). I chopped down the flowering plant before I let the soil dry out (about 2 days too early) so there was quite a bit of water left in the plant material. I didn't really notice the excessive amount of water until I started packing the tubes and a little water was running out of the bottom :doh: I should have stopped right there knowing that too wet of material (even if frozen) does not process well with butane (at least I think I remember reading that somewhere).

Anyways, I froze the material for 48 hours at -5F and then attempted to blast it. Here is what happened. The butane was not really traveling through the tube. After pressing the butane can on and off on the tube for at least 10 minutes, a tiny bit of yellow goop started to form at the end of the tube. I could shake the tube and a little would fall off on the glass dish. But it was mostly turning to ice at the end of the tube. Like hanging icicles of yellow/white oil was forming at the end of the tube. I even let one tube thaw out completely and attempted to blast it just to make sure it wasn't too cold (I knew it wasn't but I just wanted to make sure the same thing happened with a thawed tube, and yep, the same thing happened).

After fighting this for about an hour I gave up and brought the small blob of oil inside to vac purge.

I unpacked the tubes and let the bud air out on a cookie sheet until it no longer smelled like butane. I took one of the buds and pressed it in a paper towel and there was so much water. It was crazy. So I brought it inside and set it on a reptile heating pad to help dry the bud (I honestly didn't know what to do at this point, but I didn't want to toss it because I knew there was stuff still left on it). I let it dry for 12 hours and then repacked the tubes. I did not refreeze them since at this point I figured even if I reblast it and it turns out horrible and tastes awful then I can just make some pills or edibles with it. So I was just kind of over it all lol. No worries :tup:

Anyways, the second run turned out amazing.

Here is a pic of the first batch (crappy oil) on the left and the second batch (good oil) on the right. I'm sure you could tell haha :ko:

2AEC86EF-BCB1-4FE0-9D70-1E73EFFFC119_zpswelsy2w0.jpg


The first crappy batch finished purging in just 24 hours with 2 flips. It weighed out to about 2g. It has a shatter like consistency but is very cloudy and dark. It tastes horrible. Tastes like I hit a blunt :puke:The room smelled really bad for a long time after. It was a decent size dab too, but the amount of vapor I blew out was tiny. I knew something went wrong, so I checked out the nail and I noticed some black ash left from just that one hit. It didn't fully melt. It is maybe like a 1/2 melt, if that. This will be used in a batch of edibles :brow:

The second good batch of shatter has sort of a flora taste so it's a little strange but not bad at all. Pretty strong too. I actually kind of like it :D

Okay so @herbivore21 and @Hashtag46&2 here are some questions that I am hoping one or both of you may be able to answer. Thank you in advanced :tup:

The wet material was obviously the problem. I will make sure my soil is dry before chopping (if doing fresh frozen) to avoid this ever happening again lol :wave:

Why does wet plant material not work well with butane (even if the material is frozen)?

Does the moisture freeze over the trichomes in the freezer and when the butane touches it, causing mostly only chlorophyll, plant fats, lipids, waxes, etc to come out the end of the tube at the beginning before the end froze over? (That is the only thing I could think of that made reasonable sense as to why my dab tasted like a blunt and did not fully melt/left black ash).

If the 2g of poo oil is really mostly chlorophyll, plant fats, lipids, waxes, etc then is my 6g of good oil kind of dewaxed/winterized? Did I somehow just accidentally come up with a crappy dewax/winterization method? :rofl:

Here are some more pics of the good oil. It has about 24 hours left and 2 more flips :tup:
E0AAA38C-83FA-40CF-A073-92B5281AB0E0_zpsdqgcrr1s.jpg

1F952FC2-F54C-48C4-8FB9-09AF459F0126_zpsqznismcj.jpg
hahaha bro congrats on that Herculean post! There I was thinking I'd written some essays here before!

I could offer a few educated guesses when I am not so vaked and not rushing to meet other writing deadlines, but basically water and butane don't seem to be friends for our purposes. You are right to mention this. As well did you freeze the material inside the tube in preparation for blasting? You may have had the tube packed too tight, remembering that when the moisture freezes up, it will occupy more space in the tube, just like freezing a bottle of water - you gotta fill it up less.

You may have had so much ice content in there that it could have impeded the flow of the tane. A few other possibilities spring to mind but I have been experimenting with those cluster bomb gemstones and a sapphire dish and it has really impaired my ability to express any sophisticated explanation clearly and legibly. lol

I would check out the buds that the poo oil came off of man, sounds like they may potentially have actives left there ;) If not, winterize that poo oil, get the fats and waxes out and see if you don't get something lovely. It'll only take 3 fluid oz of ethanol per 2-3g of poo oil to winterize with :D

By the way, D-nail have their rosin presses coming soon, that looks like it's gonna deliver on the high pressure low temp and very even heat distribution requirements (SiC plates have way better heat distribution than ti or other metals!). They are also designed to press weight! Not a nug at a time lol
 
Last edited:

2clicker

Observer
Ever around western NY hit me up lol

this is one card id like to keep in my wallet just in case

Everyone keeps saying soon on the d-nail press. Anyone have any info on what that means? I haven't seen anything about it yet, just lots of hype. Very interested in a commercial rosin press for personal squashing needs.

i would also love to hear more about this contraption.
 

Monsoon

Well-Known Member
Everyone keeps saying soon on the d-nail press. Anyone have any info on what that means? I haven't seen anything about it yet, just lots of hype. Very interested in a commercial rosin press for personal squashing needs.
From what i saw before I think it's a modified t-shirt press with 2-sided heating. Main upside of getting it from D-Nail will be that it's been tested and optimized for making rosin out of the box and maybe they'll be able to support it with a warranty.
 

Jared

Cannabis Enthusiast
Got a ceramic nail coming in for my e-nail tomorrow Monday so I figured I should get some high quality concentrates for once lol. Still got an awesome deal on this though since it's the 4th of July weekend. Grow Life had all of their concentrates for 30/g member or no.

L.A. Chocolat nugg run grown by Grow Life processed by absolute terps
POGlsuU.jpg

EVOjS8k.jpg

CI2ODt6.jpg


Kosher Kush nugg run grown and processed by Viola Extracts
iYry1DJ.jpg

ObSAgzf.jpg

5XzL12Z.jpg
 
Last edited:

VegNVape

Increase the Peace
Company Rep
Damn 70% CBD has to put you in a nice couch coma haha!

How's the pain relief/body high?
Ha! :) I've not been locked to the couch quite as much as you may think but to be honest I've been being fairly modest with the size of my dabs. If only money was no object eh . . . :freak:

So anyway, it's very early days of testing this stuff out but so far I would say that it imparts a very soothing and calming effect which for me has started out like a solid lump of fuzz between my ears which then proceeds to emanate out to my entire body. It is a relaxing & very reassuring feeling which in my opinion could almost feel like the beginnings of a mild dose of some form of general anesthetic :zzz:

I personally think it also provides great anti-inflammatory relief.

It has an odd but not unpleasant taste which is reminiscent of something I can't quite put my finger on right now . . . . sorry.

Well, early impressions are good, so it definitely gets a thumbs up from me :tup:
It's just a shame it is so expensive.


Much love y'all
:peace:
 
Last edited:

Hashtag46&2

Trichome Technician
By the way, thanks so much for your response @Hashtag46&2 , sorry I haven't had a chance to get back yet, I am now inundated with work and won't be able to post detailed responses. Cheers though! Also lovely looking shatter there my friend!

An absolute pleasure Brother! Thank you for the kind words.
And no worries man, I too am super busy in the garden and making sure my latest harvest of Blueberry Dream is cured properly (this is merely a Homemade cut of Blue Dream, but the Blueberry Profile is much more dominant than the Super Silver Haze)

Curing Cannabis in Colorado can be a tricky challenge due to the altitude and super dry air.
This harvest smells of fresh baked Blueberry Muffins with a hint of Grapefruit..sooo stoked to sieve this into some great tasting Hash.

I produce my shatter with my own proprietary custom heat purge rig, no vac required. I use isopropyl and ethanol as my solvents though, not butane. I have not ever used butane lol
Damn, very impressed with that quality with no vac, very nice..

I'll have to dig through my albums to find some Qwiso runs, both vac'd and only very light heat and fan techs.

Hmmm I think I need to get myself some bags finally and start making bubble myself too! Hashtag I think you have inspired me bro :D

^^^^^^Hell yeah!!!!
This right here!!!!!

If I'm successful here, you would be my fourth "convert" ...Hardcore Solvent Enthusiasts seeing pictures off my work, ended up saying the same thing, and I taught them my process through PMs..

It is completely different from solvent Extractios, the Taste brother, the taste..

So, mind-blowing.

And then we got the new Rosin Tech... Making even the contanimate bags, into dabbable oils...The Capitate Glandular Head is a magical endeavor....

"Herb is the messenger, Bubble is the message "

Thank you for the sentiment my friend, looking forward to many posts of value with you!

Loving the pics of the old bho and the new full melt!

I checked out DSW and am now following him :tup: Really good stuff! I'm gonna have to try that 10 second sift!

Thanks so much Boog!!
Yeah man, DSW is the originator of the 10 second sift tech, he can be abrasive at times, but I would too if people stole my tech,and claimed it to be their own.
-but that's a whole can of worms I don't care to open... Lol

For a while now I have been thinking about spending $2500 on an AI vac oven and new vacuum pump, but now I think I will use that $2500 (or however much) to invest in some nice solventless extraction equipment to attempt to make 99% heads and some amazing Rosin.

YES^^^^^^ This Brother!

It may seem that I'm hating on BHO, but I am not... I simply want everyone I care about know, that true bliss of the Cannabis plant lies within unadulterated Glandular Heads, Solvents are relatively new in this culture, and what I'm seeing is unscrupulous profiteering from companies.
While traditional sieving techniques have been around for thousands of years.

Also; many of my acquaintances are now looking to sell their BHO gear,like CLS, Ovens etc...

I fully support anyone looking to switch to the Solventless movement.

Why does wet plant material not work well with butane (even if the material is frozen)?

The non-polar properties of Butane embodies a hygroscopic character, meaning that the raw BHO has the propensity and the desire to pull water into the solution, this is why I eliminated water in my purging process when I was cranking out BHO Runs.

I Use sand as opposed to water for my "Heat Bath"
-I put the sand in a Deep Dish Griddle,then my chamber gets nestled into the sand, then more sand is added around the base of the Chamber.

Does the moisture freeze over the trichomes in the freezer and when the butane touches it, causing mostly only chlorophyll, plant fats, lipids, waxes, etc to come out the end of the tube at the beginning before the end froze over?
Exactly!! When we freeze fresh plant material, there is a great deal of water inside the plant matter (even more so with chopping while extremely wet)
When water freezes, it expands causing the cell walls in the leaf to rupture releasing chlorophyll,plant waxes and lipids.

This is a topic I got in many debates over....

I do not like freezing my material period. Whether solvent or water ....
Wait until the material is dry to the touch, and she is primed for solvent extraction.

I did however freeze my Butane.

I take the same approach with my Bubble, however I like to cure the material prior to extraction.

Before the cure, THC is still in its acidic form, locked into its carboxyl group (THC-A) which creates hard, shatter like resin.

Here is some bubble that was processed while fresh, but not wet, nor frozen.







I called that batch "Bubble GlHash " as she literally was like glass, super shardy, but the high was more localized to the Head, , intense heady high that was short lived.

Did I somehow just accidentally come up with a crappy dewax/winterization method?
I think you're right man, all the "crap" was released on the first blast, the second slab looks extremely stable.. I'm guessing she is very brittle?

Great job man!
Hope I helped clear some things up my friend.

A few more fresh run Bubble pics..











^^^
All completely dabbable, and left just a tad of residuals on the nail, which is simply the wax membrane that encase the Trichome and the cuticle where the gland meets the stalk.

@Hashtag46&2 Welcome to FC, brother, it's allready a pleasure reading your most informative posts :)

Do come visit us fanboys and gals over at the Vapman thread if your looking for a hash vape. @herbivore21 also needed some convinceing, but I believe he's glad he joined the Vapmaniacs :lol:

Hey man!!! Thank you so much for the warm welcome, I really think I found a great group of friends here.

Looking forward to many posts with you!

I think I most definitely need to check out the Vapman, sounds like exactly what I need.

Long live the vapor, much love FC.

Edit; more Shatter P0rn...





Patty flipped over itself.. Creating the thick slab above ^^



More Bubble (My first *Successful FullMelt)
 
Last edited:

beeswax

Member
That white mousse wax though!! Looks super yummy. I need to try and find some Craft near me, that PHO looks quite nice..
 
beeswax,

DabComa

Stuck in Dab Coma
Some more Pics of another run I just made, I always run 28g, got just over 6 back on this one. Crystal clear shatter as always lol :) . No vac. The one on the right is 2g of some I got from a friend, that looks nasty, but tastes and smells phenomenal. Says its from CO but who knows around here in NY that's what everyone is saying now...

2q33azm.jpg
 

salivape

Well-Known Member
Everyone keeps saying soon on the d-nail press. Anyone have any info on what that means? I haven't seen anything about it yet, just lots of hype. Very interested in a commercial rosin press for personal squashing needs.

This is it apparently. I'm hoping for something smaller (cheaper) in the future. $300 is what people are saying. Not that pricey I guess but still a bit big for the average home presser, maybe that's just me.

mY8aE2T.jpg
 

herbivore21

Well-Known Member
So I know I've been slacking off on the oil pics (not that some of you guys haven't been sharing some magnificent work yourselves to make up for it!!!), but I thought I'd share this sadly kinda shitty quality pic I took of my latest 3rd wash cluster bomb qwiso, which came out super clear absolute shatter (and I didn't even dewax it!!!!!!).

uiGaZab.jpg


:D
 
Top Bottom