PlanetVape.ca - Canada's Destination for the Best Vapes on the Planet

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
I have a question for PV.
I noticed that you have (not available yet) listed separate vortex gongs and stems for Air and Solo??
I thought these were supposed to be the same size.
What gives??
The air is slightly smaller.
Good question and response. Technically the Stainless heat chamber is the same size. The difference is the rubber seals used by the Air create a too tight of a fit and you can damage the seals if you are not careful. On our premium Vortex stems and GonGs we took this into account and made the Air versions just slightly smaller for a perfect fit while not stretching out or damaging the seals.

Vortex Stems and GonGs finishing production very soon. Lots of new glass products coming for your favourite vapes.

For our Sublimator Fans, Sublimator has released the first flame powered Fully Titanium Sublimator called the Eliminator. Yes even the Atomizer is full Grade 2 Titanium and it includes a Titanium Carb Cap. It is a BEAST and will surprise you with the bountiful and flavorful hits it produces. Fully dis assembles for cleaning. The Eliminator, Atomizer and Carb Cap are fully CNC machined from a solid block of Grade 2 Titanium.
Read more here https://www.planetvape.ca/sublimator-eliminator-titanium-kit.html

KqM6nNI.png


Peace and Love,
PV
 

sickmanfraud

Well-Known Member
Good question and response. Technically the Stainless heat chamber is the same size. The difference is the rubber seals used by the Air create a too tight of a fit and you can damage the seals if you are not careful. On our premium Vortex stems and GonGs we took this into account and made the Air versions just slightly smaller for a perfect fit while not stretching out or damaging the seals.

Vortex Stems and GonGs finishing production very soon. Lots of new glass products coming for your favourite vapes.

For our Sublimator Fans, Sublimator has released the first flame powered Fully Titanium Sublimator called the Eliminator. Yes even the Atomizer is full Grade 2 Titanium and it includes a Titanium Carb Cap. It is a BEAST and will surprise you with the bountiful and flavorful hits it produces. Fully dis assembles for cleaning. The Eliminator, Atomizer and Carb Cap are fully CNC machined from a solid block of Grade 2 Titanium.
Read more here https://www.planetvape.ca/sublimator-eliminator-titanium-kit.html

KqM6nNI.png


Peace and Love,
PV


PV, thanks for the reply and clarification.

No one from PV responded when I asked if it would be possible to allow FC members order the Vortex gongs and stems BEFORE they are officially available.

Another question just came into my mind, if one were to purchase an Air vortex, would there be any problems using it in a Solo (besides looseness)??
 
Last edited:
sickmanfraud,
  • Like
Reactions: AhBeVapin

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
PV, thanks for the reply and clarification.
No one from PV responded when I asked if it would be possible to allow FC members order the Vortex gongs and stems BEFORE they are officially available.
Another question just came into my mind, if one were to purchase an Air vortex, would there be any problems using it in a Solo (besides looseness)??

Ooops sorry we missed your other question. No need for advance ordering, we will have lots available. Yes the Vortex sized for the Air will be too loose in the Solo and give poor performance, o-rings will not compensate using Air sized stems in a Solo.
PV
 

sickmanfraud

Well-Known Member
Ooops sorry we missed your other question. No need for advance ordering, we will have lots available. Yes the Vortex sized for the Air will be too loose in the Solo and give poor performance, o-rings will not compensate using Air sized stems in a Solo.
PV

PV, thanks for the reply.

What are you suggesting for folks who have already purchased a vortex stem that was not special for Solo or Air?

How about all of us who have already used vortex and other PVHES stems and GonGs interchangeably?
 
sickmanfraud,

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
All stems and gongs not specifically sized are all standard Arizer stem sized, the same size as all factory Arizer stems. Solo and Air Arizer stems from Arizer are all one standard size. On stems we manufacture ourselves we have the ability to customize sizes for the best fit in each model.

More Vortex coming next week.
Have a great weekend,
PV
 

poonman

Well-Known Member
I just wanted to say a BIG thank you to PV ,
for their assistance in getting my Source Orb Terras
up and running . They found out my problem and
Bent over Backwards to help , even tho it was user error .

With that said , the Orb Terras has become my
Best and Favorite Pen vape for portable dabs .
I will post more thoughts on the terras in the Orb thread .

But I Highly recommend the Orb and you should grab
one from PV asap ... btw the Source has some promo
thingy happening right now too , for certain regions only tho .
 

dormouse

Well-Known Member
Once again it has been a pleasure purchasing from PV.

Don't know if this is the right place to post this, but is there a good way to dry the f-bomb on the inside, so as to avoid the potential buildup of germs and such nastiness? It seems that water/condensation remains in the chamber.
 

Poostuff

Please delete
I've got a question about the PVHE turbo gong. I bought this gong a few months ago & the Solo I'm using it with is maybe 18 months old. I was hesitant to use it at first because it's super tight & I had to trim back part of the cap of the Solo to fit it in, so obviously I'd really like to get some results from it. I've tried pretty much everything & all it seems to do is cook the load without producing any vapor, I don't even know where the vapor goes. I've used this Solo successfully with other gongs & stems so it's a little confusing.
I do like thicker vapor & usually run the Solo on a higher setting but I've been through the whole spectrum with no results. Is it possible this gong is too wide for my Solo & it simply chokes the airflow? Sorry to bother you, I don't really know who else to ask but I'd appreciate any feedback.
 
Poostuff,

poonman

Well-Known Member
Once again it has been a pleasure purchasing from PV.

Don't know if this is the right place to post this, but is there a good way to dry the f-bomb on the inside, so as to avoid the potential buildup of germs and such nastiness? It seems that water/condensation remains in the chamber.

So what is the remedy for drying the F-bomb ?

I've got a question about the PVHE turbo gong. I bought this gong a few months ago & the Solo I'm using it with is maybe 18 months old. I was hesitant to use it at first because it's super tight & I had to trim back part of the cap of the Solo to fit it in, so obviously I'd really like to get some results from it. I've tried pretty much everything & all it seems to do is cook the load without producing any vapor, I don't even know where the vapor goes. I've used this Solo successfully with other gongs & stems so it's a little confusing.
I do like thicker vapor & usually run the Solo on a higher setting but I've been through the whole spectrum with no results. Is it possible this gong is too wide for my Solo & it simply chokes the airflow? Sorry to bother you, I don't really know who else to ask but I'd appreciate any feedback.

I've heard the turbo gongs can be too airy ,
so maybe slow down you're inhales .
Hope that helps .
 

sickmanfraud

Well-Known Member
Hey PV,

I can't be the only FC'er who wants to know...

Why no pictures of the Air accessories?

Also, I am trying to purchase 3 of an item you only have one of. Can I ask you to hold the order until i can get it all at once?

You held something for me before, but that was to add a gong to a vape order.
 
sickmanfraud,
  • Like
Reactions: AhBeVapin

little maggie

Well-Known Member
I see all this positive reviews. You are not very good at responding to emails to your website asking for information. Other than the robot response saying someone would write. I wonder if this is a better place to ask ordering questions since your more responsive to this thread than to emails. I'm trying to find the accessory I want somewhere else I would get it since other vape sites are better at responding.
 

Been Vapin

Fringe Class
I see all this positive reviews. You are not very good at responding to emails to your website asking for information. Other than the robot response saying someone would write. I wonder if this is a better place to ask ordering questions since your more responsive to this thread than to emails. I'm trying to find the accessory I want somewhere else I would get it since other vape sites are better at responding.


Planetvape will not respond to my emails once again. I dont even get a robot text. Super frustrating.
Can't really recommend them as a vendor at this point. :(
 
Been Vapin,

Been Vapin

Fringe Class
They have always responded to mine. I emailed them a question about two weeks ago and got a reply within a day.


I have sent multiple emails this week on top of the old ones with no reply. I have an open support ticket and everything. Last time they responded was May 28.
 
Been Vapin,

sickmanfraud

Well-Known Member
Has anyone purchased a vortex gong? I really want to know, why buy a vortex gong if I have PVHES turbo and PVHES regular gongs?

Also, anyone purchase and try a vortex stubby?? I am very concerned about the stem getting too hot.
 

whatitdew

Vapes R Great
I have a vortex stem for my air that I really like. I like the extra length for cooler hits. I seem to get better hits with the vortex but that could be a placebo effect. I just ordered a vortex gong for my air so I will let you know how it is when I get it. Ebay domed screens are a must for the vortex IMO.
 

Khantagious

Well-Known Member
I have seen people mention using FC promo codes at this retailer, but I don't see any mention of what they are, am I misinformed or just looking in the wrong place?
Thanks!
 
Khantagious,

whatitdew

Vapes R Great
Received my Air Vortex GonG today.

So far a little disappointed in the quality. There is a line mark,or scratch around the middle section where the glass nub is. Hopefully this does not degrade the strength of the glass
Glasswork is a bit wonky and there is only one glass nub on one side making it annoying when pulling the glass joint when clearing a water tool. I posted a couple pics in the Air thread.

Will report back after a lot of testing with a water tool:leaf:
 
whatitdew,
Top Bottom