ataxian

PALE BLUE DOT
Thanks buddy. I didnt know the D020 had a long line of bubblers. Its rather awkward the way the search function works on dhgate. I mostly stumble upon things there because I find it here or because they show me on the dhgate page, because when I look for something specific it will turn up as infounded.

Thanks again buddy. I am definately getting this one.

Also for some reason I can never get the same results if I heat up my nano for 45mins to an hour on 6.5 as opposed to when I am on time constraints and heat up my nano at 10 for about 7 mins then 6.5 for 13 minutes. The latter just roasts the bud and I dont get much effect from it. While the first gives me flavor and good buzz.

how do you guys/gals preheat the nano to give you consistent vapor all the time? I understand some people leave it on all the time, I wish I could but I cant for certain reasons.

The instructions boasts a 2 minute heat up time. At that point I get little to no vapor and hardly any buzz.
I have most of the D series of bubblers except I don't have the D20-D because the FC186 and FC187 have more volume.
The D020 is a good bubbler to start with for sure.
today I'm medicating with a D022.

The D022 is bigger than a D020 and smaller than a D020-D.
Ì use the D022 for the NANO the most even though I have others as well!
the D020 I use with portables a lot.
When I use the D020 for the NANO I use a ASH CATCHER to increase volume.


Think of glass like adult tinker toys!
 

Neceros

Well-Known Member
I have most of the D series of bubblers except I don't have the D20-D because the FC186 and FC187 have more volume.
The D020 is a good bubbler to start with for sure.
today I'm medicating with a D022.

The D022 is bigger than a D020 and smaller than a D020-D.
Ì use the D022 for the NANO the most even though I have others as well!
the D020 I use with portables a lot.
When I use the D020 for the NANO I use a ASH CATCHER to increase volume.


Think of glass like adult tinker toys!
I was just literally looking at the D021 and D022. They look nice. I also add to the volume of my D020 with a drop down piece. Also collects reclaim oil for me.

Cc6p9Kd.jpg
 

Chezgreendream

First the flavor, then the buZzz settles in....
Thanks!!! @ataxian, thats a pretty cool piece, because of it I also found this interesting piece as well.
iQBD0kg.jpg



Can somebody tell me where can I get a replica like this one. Im not trying to pay $650 dollars.

81sFS7V.jpg
 
Last edited:

Dizzie206

Vapes: MFLB, Solo, E-nano
I must say I love seeing your guys genuine enthusiasm about this vape! So for the past week I've been doing research on it I pulled the trigger yesterday(Coming from MFLB, Solo) So I was wondering if the Planet Vape gongs are compatible with the nano ( I have two for my solo), This might already be answered somewhere so sorry if it is
 

Neceros

Well-Known Member
So I was wondering if the Planet Vape gongs are compatible with the nano ( I have two for my solo), This might already be answered somewhere so sorry if it is
I can't answer you, but I have been told that the solo aroma cup works just fine with the e-nano. It's a possibility.


That is a fine piece, but I don't think it's similar. I like that red piece because it looks... squat, I guess. I don't like really tall glass, and I like mouth stems that are at an angle, so I can sit and toke.

That red piece looks really nice and thick, and squat. I don't know how else to explain it lol.

Haha. This is awesome: http://www.dhgate.com/store/product/2014-new-glass-smoking-pipes-galss-bongs/211004225.html
 
Last edited:

DieHard

Accessory supplier
Accessory Maker
I can't answer you, but I have been told that the solo aroma cup works just fine with the e-nano. It's a possibility.



That is a fine piece, but I don't think it's similar. I like that red piece because it looks... squat, I guess. I don't like really tall glass, and I like mouth stems that are at an angle, so I can sit and toke.

That red piece looks really nice and thick, and squat. I don't know how else to explain it lol.
$80 or $650
It's only 11" tall. With a bent neck.
 

Chezgreendream

First the flavor, then the buZzz settles in....
I can't answer you, but I have been told that the solo aroma cup works just fine with the e-nano. It's a possibility.



That is a fine piece, but I don't think it's similar. I like that red piece because it looks... squat, I guess. I don't like really tall glass, and I like mouth stems that are at an angle, so I can sit and toke.

That red piece looks really nice and thick, and squat. I don't know how else to explain it lol.

That is a mighty fine piece, Thanks!!!@DieHard, I agree with you @Neceros , thats what I liked about that red piece. Its nice, thick and squat, as you say. Lol.....Thats what I look for in a piece.
 
Last edited:

Uzer

Well-Known Member
I must say I love seeing your guys genuine enthusiasm about this vape! So for the past week I've been doing research on it I pulled the trigger yesterday(Coming from MFLB, Solo) So I was wondering if the Planet Vape gongs are compatible with the nano ( I have two for my solo), This might already be answered somewhere so sorry if it is

The solo and nano GonGs and Stems don't operate the same way. On the Solo the oven fits around the glass and herb chamber, while on the nano the heater slides into the glass but sits above the herb chamber over which the hot air is then drawn through, hence the convection. So in short. No, they aren't compatible.
 

GetLeft

Well-Known Member
Thought I'd mention the fact that I'm finding the e-nano to be easier to manage discretely than I had anticipated. For the first week I've been holding back on using it because it's not portable and I have to be on the very down low when I vape. Jeez. It sits back behind books on a shelf such that I can just turn it on and let is set there completely out of view, then drop by for quick visits every now and again. Again being the operative word. I've been enjoying my first multi-sesh day with the nan, and am truly loving it.
 

flotntoke

thoroughly vaped
Took just my third turn on my new maple e-nano a little while ago. The first two goes earlier this week I simply warmed at 6 for around 20 minutes before hitting it dry to kind of establish a base line. Wonderful flavor, and an effective buzz. I was a little constrained time wise so managed only a couple of light hits each time, which did the trick just fine for me. This time I warmed up at 10 for a little while, then backed down to 6, let it set for a few minutes, then hit on a tiny amount of medium grind. Produced a little more vapor than the first two sessions, which doesn't really matter to me (I'm not a cloud chaser), but I definitely caught a roasted flavor that I hadn't experienced the first two times. I wasn't used to that so I checked the bowl to see what color it was. A nice medium brown color; no black. So the flavor plus the easy draw are the two big upgrades I can observe at this point. But I've got lots of learning to do. I'm a low heat low vapor kind of guy, managing my buzz by the number of low heat hits I do. So I think next load I'll either push the screen a little further away from the heat or lower the temp to 5.5 just to see how that works, see how low I can to go for my minimum setting. And of course when I get the appropriate opportunity I'll just set it up on the table, turn up the temp and have a good solid go at some higher temps. Just to start gauging my upper level temps. I have to gauge those levels too. Just to be fair.

Thanks for all the shared wisdom, folks. I came to the nano somewhat prepared due to following this thread. Even so, I'm looking forward to lost of future experimentation.

Check your other variables - especially dryness of material. Might be that it just didn't cool all the way down. Depending on your set up, if you had glass on while waiting to go down to 6, if you left it on 10 for a while (10 - 15 mins) and a few other things, may have to wait a little longer for cooling. Lately for me there has been a fan or a/c on so cooling from quick heat up has taken a little less time - 3/4 mins at 10, then down to 6.5 for 2 mins. When you do this I don't think it actually is fully heated to 10, just on the way there. After you have your nano for a bit you start to get a general feel for it from warmth of wood (usually pretty cool with quick heat when you turn down from 10 to 6).

Ah. Must be nice to have disposable income. Also, I'm just the mindset of I want one of everything, and I want the best one. I honestly never even considered having more than one log vape.


I'm honestly wondering what the differences are. Why do they hold a place in your heart? Any special reasons?

Have only used a UD once and was fine, but lacking compared to my nano - but that's what I'm used to, too. HI is a bit of a different beast, but both run on D/C current. Really best to read on each and there are some one vs. the other threads in the closed threads section. They pop up from time to time, but mods shut them down after a page or so because they usually degenerate into fan boy battles pretty quickly. Still some good info in most.

FWIW, HI waiting list is at least 15 months (that's how long I've been on and still there), and you don't pay until your number comes up.

Thanks buddy. I didnt know the D020 had a long line of bubblers. Its rather awkward the way the search function works on dhgate. I mostly stumble upon things there because I find it here or because they show me on the dhgate page, because when I look for something specific it will turn up as infounded.

Thanks again buddy. I am definately getting this one.

Also for some reason I can never get the same results if I heat up my nano for 45mins to an hour on 6.5 as opposed to when I am on time constraints and heat up my nano at 10 for about 7 mins then 6.5 for 13 minutes. The latter just roasts the bud and I dont get much effect from it. While the first gives me flavor and good buzz.

how do you guys/gals preheat the nano to give you consistent vapor all the time? I understand some people leave it on all the time, I wish I could but I cant for certain reasons.

The instructions boasts a 2 minute heat up time. At that point I get little to no vapor and hardly any buzz.

See above re: leaving it at 10 for a good bit. 7 minutes may be too long, but would think 13 at 6 would be enough to let temp drop. Hard to tell with each nano in each situation. My best luck is at 10 for 3-4 mins, then 6.5 for 3. Even at that, a straight 20 - 30 mins at 6.5 (or even better still on from earlier) gives the best effects. The quick heat is really just a jump start to get up to temp, but isn't nearly as good of a warm up.

Glad to hear the good old D020 looks like it will fit the bill!

What advantage does the double chamber on that D022 give over the other glass you listed?

Still don't have one of these, but on my short list forever. Nice rig, but biggest benefit I see with the removable center stem is for cleaning. Wide open in can once you pull that out, and having a cage like that outside of the can allows it to be VERY easily cleaned.

Do you guys prefer the Fixed gong or adjustable?

Yeah... read last 20 pages or many others. Always a good idea to read back at least 10 pages (if they're there) on any vape you're looking into, and I'd say 20 here because of speed of thread. Always good to see what has been good and maybe bad lately since you're looking into it anyway. Search function (top right of every page on FC) can also be very helpful. Often good to check the "Search this thread only" if looking at a specific vape. Check this post for a good bit of info on adjust-a-bowl vs. fixed glass stem. Plenty of other good stuff all through this thread, too.

Thought I'd mention the fact that I'm finding the e-nano to be easier to manage discretely than I had anticipated. For the first week I've been holding back on using it because it's not portable and I have to be on the very down low when I vape. Jeez. It sits back behind books on a shelf such that I can just turn it on and let is set there completely out of view, then drop by for quick visits every now and again. Again being the operative word. I've been enjoying my first multi-sesh day with the nan, and am truly loving it.

If there is nothing flammable around it on the shelf, you could even leave it on and turn it around so the light doesn't draw attention. Or just put something over or in front of the light.

Kind of forgot - and sorry to those who already hit like...

But forgot to mention two things I remembered today that I'm not really sure I like about the nano.

  1. Since it is on all the time, it is too f'n easy to say, "Yeah... I think we'll have another quick small load before we head out." Did a quick wake and bake before heading out to breakfast with the GF yesterday. You know how sometimes they can take a little while to actually get out the door? Yeah... having nano always ready to go can make these situations kind of interesting, and have you order WAY too much for breakfast. In short, if order so much you need a box to take home the rest of your breakfast, you're too damned stoned!! :doh:
  2. Concentrates are just too damned good and efficient!! A little while ago I put a small piece of shatter on some ss wool. Took a few nice hits. Got good and toasty - especially considering I was pretty buzzed all afternoon. A little while later I was going to dump and load some flower, but NOOOOO! Still more hits of shatter in there. Now way stoned, and you know I'm not throwing those last couple hits in the duff can! Goo in here is like the fuckin Energizer Bunny. It keeps going and going and going....:smug:
 
Last edited:

zaphod42

Well-Known Member
I must say I love seeing your guys genuine enthusiasm about this vape! So for the past week I've been doing research on it I pulled the trigger yesterday(Coming from MFLB, Solo) So I was wondering if the Planet Vape gongs are compatible with the nano ( I have two for my solo), This might already be answered somewhere so sorry if it is
Mine don't. EpicVape GonGs are pretty cheap though...
 

Bravesst

Full Steam Ahead
Manufacturer
try to get "justifiable" funds together so my wife doesn't freak, but I think I'm very very sold on the nano. VAS got me bad. I keep check epic's site, checking my email (I sell online, so sales mean vape / herb / fun money) for sales. As soon as I can, I'm gettin' a log, and the more I read, the more the enano sounds like it comes out on top for me. Can't freakin' wait.
 

NekoGurrl

Well-Known Member
Got my E-Nano today, all happy. But it sure doesn't look like walnut, they sent me Maple instead. Sure I'll work out something with them. Since I want an Exotic one as well.

First impressions, fantastic! Just broke off a small piece and stuck it into the 14mm adjustable gong adapter. Have had 2 puffs and my smile is ear to ear. I set it at 6.5 let it warm up for 30 min, then tested it out. The outside does get warm, my laser thermometer shows it at around 120 deg. I'll have to find a place for it in the living room, or my will curl up next to it in the winter. Don't want it covered in cat dander.

Very happy with my purchase, now I wait till work is over and really give it a test.
 
Last edited:

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Got my E-Nano today, all happy. But it sure doesn't look like walnut, they sent me Oak instead. Sure I'll work out something with them. Since I want an Exotic one as well.

First impressions, fantastic! Just broke off a small piece and stuck it into the 14mm adjustable gong adapter. Have had 2 puffs and my smile is ear to ear. I set it at 6.5 let it warm up for 30 min, then tested it out. The outside does get warm, my laser thermometer shows it at around 120 deg. I'll have to find a place for it in the living room, or my will curl up next to it in the winter. Don't want it covered in cat dander.

Very happy with my purchase, now I wait till work is over and really give it a test.
Are you sure it's not Walnut? Do you have a picture by chance? If its not Walnut, it's prob Cherry if reddish blonde, or Maple if whitish brown. Only Oak I've heard of is that awesome Bog Oak from @Ed's TnT :2c::peace:
 

The Stranger

Account Closed
Got my E-Nano today, all happy. But it sure doesn't look like walnut, they sent me Maple instead. Sure I'll work out something with them. Since I want an Exotic one as well.

Well I sure can't wait to get home from work, mine has been delivered too!!

Hey, maybe I got your walnut because I ordered a maple. I'll let ya know ha!

And I'm glad to hear that 6.5 is 120 degrees because that's what I mainly vaporize at. I was actually going to go through all the settings and use my laser thermometer to check also.
 
Top Bottom