E-Nano from Epickai

SO my first road trip with my nano... I live in an 1800 era house, With all its electricial wierdness.
There is A lot of wire before my lil nano gets juice.
I like 7 or 7.5, dry. Well we Check into the hotel, warm up, to 7, and almost combust, blackened the entire load in one.
I am finding 6 is good here. I will be else where soon, lets see if there is a difference.
I always thought it ran cool, guess it's
All about the supply . ohm elecrtical I mean.

hafalump said:

SO my first road trip with my nano... I live in an 1800 era house, With all its electricial wierdness.
There is A lot of wire before my lil nano gets juice.
I like 7 or 7.5, dry. Well we Check into the hotel, warm up, to 7, and almost combust, blackened the entire load in one.
I am finding 6 is good here. I will be else where soon, lets see if there is a difference.
I always thought it ran cool, guess it's
All about the supply . ohm elecrtical I mean.

Click to expand...

The Ohms can possibly have something to do with it, also the temperature in the atmosphere and how long you leave it on for. I find that a 7 from half an hour heat up is not the same 7 with almost 2 hours heat up. While the intial 7 will probably extract like I want it to, the latter will charr it some bit, even though a bit of charring here and there somehow finds a rightful spot in my sessions.

Does anyone sell essential oil cups for the e-nano? I know Underdog sells them.

Edit: Nevermind. I didn't realize tere was a second page in accessories.
Edit2: But they are sold out. Does anyone sell them here?

Can someone recommend me a mini bong or small water pipe with a wide mouth piece that I can pair with my e nano.

I have a D020 D, which I love by the way, thanks to you guys, but I want something about half the size of that, simpler in design that does not take up much space. Other than the pwnt..... I dont know if they exist but I was looking for one with an 18mm joint.

Thanks alot.

flotntoke said:

Haven't done it in quite some time, but if you put about 1/4 mint listerine (or other mouthwash I guess) and the rest cool water in your bubbler the hits will be overwhelmingly minty fresh. Use ice if you can or ice water for maximum effect. Also, the listerine keeps everything clean (probably as clean as cran extract) and won't get icky for at least a few days. Needless to say, you aren't going to be tasting any sweet terpenes with this set up. Might be nice to kill the flavor of rough QWISO, though.

Don't think I have done it since I've had the nano, but was an occasional fun change with the EQ. Might have to give this a whirl myself this weekend. Thanks @cwheezy for triggering the remembering! Hope you feel better soon. Summer colds SUCK!

Click to expand...

I remember trying that out in high school. It's like a blast of spearmint to the face. I'll definitely give 'er a shot again. Thanks a bunch, I think I'm getting over it already

Chezgreendream said:

The Ohms can possibly have something to do with it

Click to expand...

Resistance (ohms) doesn't change - the heater has the same resistance anywhere in the world.

What changes is the current (flow of electricity) which has changed.

Neceros said:

Does anyone sell essential oil cups for the e-nano? I know Underdog sells them.

Click to expand...

I have the original one from EpicVape - way too loose for my liking (t was a standard 18mm male joint with a cup on top - way too wobbly to put more than a few drops of liquid in it)

I have an order for a custom Aromatherapy cup from @VaPeD&CoNfUsEd and I'm working on finding a suitable high-temperature material to 3D print so I can start offering custom Aromatherapy cups (I've got a sweet idea for a cauldron in a dragon's hand, but I need a LOT of practice in zBrush before I could sculpt something that exotic)

Are there currently any promotion codes to use on epicvape for the enano? Thanks in advance!
I think a nice log vape would complete my collection (VAS rationalizing)

Bravesst said:

Are there currently any promotion codes to use on epicvape for the enano? Thanks in advance!
I think a nice log vape would complete my collection (VAS rationalizing)

Click to expand...

fclove gets you 10%

Bravesst said:

Are there currently any promotion codes to use on epicvape for the enano? Thanks in advance!
I think a nice log vape would complete my collection (VAS rationalizing)

Click to expand...

BOBCAT said:

fclove gets you 10%

Click to expand...

Unless they're having a good sale (like 4/20 back in April), the fclove code is your best bet. Be sure you register your unit as an FC member buyer.

is it important to register for warranty? no problem just curious

After deciding my Ariser Extreme Q was not giving me what I wanted, I decided to come back to FC to find the answers I was looking for. After all back in 2012 FC gave me the info I needed to pick the Extreme Q, which I admit is great for what it does. I just found that it doesn't work for the style of vaping I like. Thankfully I work from home, but can't take to much at one time. So I like to do occasional puffs throughout the day.

Then I found the E-Nano thread, kinda hard to mis actually. By the time I'd finished readying 1/2 way thru the thread, I knew that a log vape was in my near future. Finally decided on the E-Nano based on how straight forward it is, nothing complicated really. Only 2 points of failure in the design, the chord (easily replaceable) and the ceramic heater. With the warranty and cost it became a no brainer.

Decided on a Walnut, with a 14 and 18 mm GonG adaptors. Placed my order yesterday before work, and this morning I find it's been shipped and should arrive on Monday!

I want to thank all of you for helping me find my next medicinal consumption device. I'll post a follow up next week after some enjoyable testing.

NekoGurrl said:

After deciding my Ariser Extreme Q was not giving me what I wanted, I decided to come back to FC to find the answers I was looking for. After all back in 2012 FC gave me the info I needed to pick the Extreme Q, which I admit is great for what it does. I just found that it doesn't work for the style of vaping I like. Thankfully I work from home, but can't take to much at one time. So I like to do occasional puffs throughout the day.

Then I found the E-Nano thread, kinda hard to mis actually. By the time I'd finished readying 1/2 way thru the thread, I knew that a log vape was in my near future. Finally decided on the E-Nano based on how straight forward it is, nothing complicated really. Only 2 points of failure in the design, the chord (easily replaceable) and the ceramic heater. With the warranty and cost it became a no brainer.

Decided on a Walnut, with a 14 and 18 mm GonG adaptors. Placed my order yesterday before work, and this morning I find it's been shipped and should arrive on Monday!

I want to thank all of you for helping me find my next medicinal consumption device. I'll post a follow up next week after some enjoyable testing.

Click to expand...

Welcome to the e-NANO family hope you will love your nano like I do...

Neceros said:

Does anyone sell essential oil cups for the e-nano? I know Underdog sells them.

Edit: Nevermind. I didn't realize tere was a second page in accessories.
Edit2: But they are sold out. Does anyone sell them here?

Click to expand...

The Aroma cup for the Arizer Solo should work. I just tried it on there and it fits.

NekoGurrl said:

After deciding my Ariser Extreme Q was not giving me what I wanted, I decided to come back to FC to find the answers I was looking for. After all back in 2012 FC gave me the info I needed to pick the Extreme Q, which I admit is great for what it does. I just found that it doesn't work for the style of vaping I like. Thankfully I work from home, but can't take to much at one time. So I like to do occasional puffs throughout the day.

Then I found the E-Nano thread, kinda hard to mis actually. By the time I'd finished readying 1/2 way thru the thread, I knew that a log vape was in my near future. Finally decided on the E-Nano based on how straight forward it is, nothing complicated really. Only 2 points of failure in the design, the chord (easily replaceable) and the ceramic heater. With the warranty and cost it became a no brainer.

Decided on a Walnut, with a 14 and 18 mm GonG adaptors. Placed my order yesterday before work, and this morning I find it's been shipped and should arrive on Monday!

I want to thank all of you for helping me find my next medicinal consumption device. I'll post a follow up next week after some enjoyable testing.

Click to expand...

I'm in the same boat as you except with my herbalaire. I also placed an order yesterday and it was shipped but should be here Tuesday!

Even better, my buddy is going to buy my herbalaire from me for the same price I bought it. This is a win win.

I think an enano is in my near future, "assembling" funds, what I need accessory wise, it's gonna run about $300 before discount. Thank for the great thread and codes!

Back on massdrop
https://www.massdrop.com/buy/e-nano-vaporizer-2?mode=guest_open

hafalump said:

SO my first road trip with my nano... I live in an 1800 era house, With all its electricial wierdness.
There is A lot of wire before my lil nano gets juice.
I like 7 or 7.5, dry. Well we Check into the hotel, warm up, to 7, and almost combust, blackened the entire load in one.
I am finding 6 is good here. I will be else where soon, lets see if there is a difference.
I always thought it ran cool, guess it's
All about the supply . ohm elecrtical I mean.

Click to expand...

That's pretty extreme, but have noticed similar and posted about it here often. Don't know about the ohms, or even amperage. I think it has more to do with stress on the whole electrical system you're working with and dirty power. Some surge suppressors, long extension cords and using an d/c > a/c converter do it too. I'm not sure but my central a/c seems to even have an effect - tho that is probably in part due to ambient temp drop. Just another reason why it's hard to do fair comparisons of temperature settings from nano to nano here.

Neceros said:

Does anyone sell essential oil cups for the e-nano? I know Underdog sells them.

Edit: Nevermind. I didn't realize tere was a second page in accessories.
Edit2: But they are sold out. Does anyone sell them here?

Click to expand...

Andy posted something a while ago (month or so?) about not having amy more produced until he can find a decent blower/glass shop to produce good ones consistently. As @DieHard said, the solo cup will work. It's a little loose, but stays on just fine. I've been using mine a few times a week.

Chezgreendream said:

Can someone recommend me a mini bong or small water pipe with a wide mouth piece that I can pair with my e nano.

I have a D020 D, which I love by the way, thanks to you guys, but I want something about half the size of that, simpler in design that does not take up much space. Other than the pwnt..... I dont know if they exist but I was looking for one with an 18mm joint.

Thanks alot.

Click to expand...

The good old straight D020 might be just what you're looking for. They're cheap, have a good bit less volume than the -D and can be had from the most solid vendor on DHGate IMO - SunshineStore. Don't have a -D myself, but have one that I am pretty sure has same can. I wouldn't say D020 is half volume, but estimate it is less than 2/3. D020 is a nice little rig!

NekoGurrl said:

After deciding my Ariser Extreme Q was not giving me what I wanted, I decided to come back to FC to find the answers I was looking for. After all back in 2012 FC gave me the info I needed to pick the Extreme Q, which I admit is great for what it does. I just found that it doesn't work for the style of vaping I like. Thankfully I work from home, but can't take to much at one time. So I like to do occasional puffs throughout the day.

Then I found the E-Nano thread, kinda hard to mis actually. By the time I'd finished readying 1/2 way thru the thread, I knew that a log vape was in my near future. Finally decided on the E-Nano based on how straight forward it is, nothing complicated really. Only 2 points of failure in the design, the chord (easily replaceable) and the ceramic heater. With the warranty and cost it became a no brainer.

Decided on a Walnut, with a 14 and 18 mm GonG adaptors. Placed my order yesterday before work, and this morning I find it's been shipped and should arrive on Monday!

I want to thank all of you for helping me find my next medicinal consumption device. I'll post a follow up next week after some enjoyable testing.

Click to expand...

Think you made an excellent choice!! Be sure to let us all know how you like it!

The Stranger said:

I'm in the same boat as you except with my herbalaire. I also placed an order yesterday and it was shipped but should be here Tuesday!

Even better, my buddy is going to buy my herbalaire from me for the same price I bought it. This is a win win.

Click to expand...

Glad to see you're stepping up to the nano too, @The Stranger !! Interested to hear how you think it compares to the herbalaire. That's one that is on and off my "next vape" list regularly.

Bravesst said:

I think an enano is in my near future, "assembling" funds, what I need accessory wise, it's gonna run about $300 before discount. Thank for the great thread and codes!

Click to expand...

Must be a lot of accessories!! You know I really like Andy and love Epic, so want to see him make as much money as possible, but you can get away with a GonG and the included stem and have plenty to get exceptional performance from your nano - just make sure you don't break any glass. On the other hand, I think shipping is the same no matter how big your order gets with accessories, so could be better to wait and get all at the same time.

SavageCore said:

Back on massdrop
https://www.massdrop.com/buy/e-nano-vaporizer-2?mode=guest_open

Click to expand...

Man!! That is a great price, especially once it hits 15! That is about what pre-order price was at introduction a couple years ago. Month wait, but probably worth it for many.

Chezgreendream said:

Thanks alot.

Click to expand...

Well, actually... Get the non-D. I love my D020. Very small, and compact and wonderful. Not that much smaller than the D020-D, but I love it. GREAT for oil, etc.

NekoGurrl said:

Decided on a Walnut, with a 14 and 18 mm GonG adaptors. Placed my order yesterday before work, and this morning I find it's been shipped and should arrive on Monday!

Click to expand...

Cool! I just recently sold my EQ4.0, myself, and am about to buy an e-nano! Fate-high5! o/

The Stranger said:

I'm in the same boat as you except with my herbalaire. I also placed an order yesterday and it was shipped but should be here Tuesday!

Even better, my buddy is going to buy my herbalaire from me for the same price I bought it. This is a win win.

Click to expand...

USPS usually deliver before noon here (have a minor Amazon addiction). It will be hard not to give it a full test until after I get done working! Just posted on another section of the forum on getting the down stem free from my favorite water tool after 6 months, so I already know I'll be testing it on that first. It's what I've used with the Q, so looking forward to a nice milky hit.

I haven't decided what to do with my Extreme Q, I know the next couple weeks it's going to be living with my land lord. She still combusts, going to change that.

NekoGurrl said:

I haven't decided what to do with my Extreme Q, I know the next couple weeks it's going to be living with my land lord. She still combusts, going to change that.

Click to expand...

Don't get rid of an old working vape unless you must get rid of it! It's always good to have a backup. And it's good to switch vaporizers every few weeks/months to prevent yourself from building up a tolerance!

NekoGurrl said:

USPS usually deliver before noon here (have a minor Amazon addiction). It will be hard not to give it a full test until after I get done working! Just posted on another section of the forum on getting the down stem free from my favorite water tool after 6 months, so I already know I'll be testing it on that first. It's what I've used with the Q, so looking forward to a nice milky hit.

I haven't decided what to do with my Extreme Q, I know the next couple weeks it's going to be living with my land lord. She still combusts, going to change that.

Click to expand...

I need to try my EQ somemore?
it hasn't medicated me yet?

The NANO right away gave flavor and medication the first go!

I ordered 4 new GonG's 2 x 14mm and 2 x 18mm.

Water World this weekend!

My NANO is WALNUT like yours!

I'm using my Cherry Nano right now and using the Walnut Nano as an aromatherapy device using a little glass aromatherapy cup from my Solo. A bit of vanilla/pear scent circulating through the air.

I have my temp set at 6 1/4 medicating with some permafrost strain. A good one for during the day. It's producing some awesome vapor that's nice and smooth. Permafrost has a bit of a cooler taste. I have some Blue Dream strain that I need to vaporize at 6, a higher temp feels too harsh with that one.

Okay, okay, I'll drop the base holder thingee, and the adjustable stem, I'm down to 250 before discount. I could get outta there at $225, with an extra stem and a 18mm GonG

@CarolKing loving your enano?

SavageCore said:

Back on massdrop
https://www.massdrop.com/buy/e-nano-vaporizer-2?mode=guest_open

Click to expand...

Ughhhh I wish I would have had patience and waited!

Ratchett said:

Don't get rid of an old working vape unless you must get rid of it! It's always good to have a backup. And it's good to switch vaporizers every few weeks/months to prevent yourself from building up a tolerance!

Click to expand...

I try to keep from getting my tolerance, but have to keep my levels high enough to keep medicated. Rosen tech is defiantly making that harder to do.

I've been making my own extracts for years, my latest method is close to vaping bud directly so not that tied to one device. But love the taste of freshly toasting bud. I only get that on the EQ for the first 5-6 pulls, then it's popcorn time.