Herb Grinders

ginolicious

Well-Known Member
What's the best way to clean the herb grinder after? I have over 4gs of kif and my screen looks clogged. Rubbing alcohol and a place in a Baggie and shake? Can I vape it as it is or should I press it? What is the best way to press it? Rather not buy a press.
 
ginolicious,

Delta3DStudios

Well-Known Member
Accessory Maker
What's the best way to clean the herb grinder after? I have over 4gs of kif and my screen looks clogged. Rubbing alcohol and a place in a Baggie and shake? Can I vape it as it is or should I press it? What is the best way to press it? Rather not buy a press.

Credit goes to Vitolo for this video


I followed these instructions and had no problems, worked great! (better than expected)
 

zor

Well-Known Member
I clean my 4 piece by soaking each piece in ISO, rinsing with water, and then shaking excess water off and letting it air dry. I try to pay particular attention to the screen by blowing through it to ensure the gaps are clear and not encrusted with oils and what not (sometimes I don't soak long enough, I'm impatient). (edit: yeah, that vid is great! I take a few shortcuts but that's an excellent process)

As for kief (which I recently learned comes from the arabic/persian word for pleasure, my heritage :p), I suppose it depends what you want to do with it. I used to vape it just by sprinkling into my MFLB but it was a bit of a pain to clean up afterward. I've pressed it too but even then I don't find vaping it to be satisfying. So, now I just accrue enough until I make some nice edibles, blasphemy to some but it's perfect for me :)
 

ginolicious

Well-Known Member
Don't know what I want to do with kief I guess smoke it. Press it and smoke it if possible?

Now soaking a grinder won't ruin the logo on the top? I have a nice logo on my Puff grinder that I don't want to lose from the ISO. ISO won't take it off will it? That's my concern lol. I guess a toothbrush will help clean the screen yeah? Cause my screen is my concern. I have a brand new Zeus grinder. But my Puff is my favorite.
 
ginolicious,

MinnBobber

Well-Known Member
Credit goes to Vitolo for this video......


I followed these instructions and had no problems, worked great! (better than expected)
................................................................................................................
Thanks Vito and Ratchett,
I knew this from earlier but the video prompted me to actually do it ;)

Very little "herb hours" on my SCS 3 piece but tried this.
Residue is evaporating as I type. Not expecting much of anything, but it would be a nice surprise.
---------------------------------------------------------------------------------------
Now soaking a grinder won't ruin the logo on the top? I have a nice logo on my Puff grinder that I don't want to lose from the ISO. ISO won't take it off will it? That's my concern lol.

I would never take a chance and would lightly clean the top/logo with dish soap or ISO and immediately wipe/rinse. Then soak the underside of the top and the rest of it in ISO.
Brush with soft toothbrush and rinse rinse rinse,
 
MinnBobber,
  • Like
Reactions: NickDlow

ginolicious

Well-Known Member
Yeah I just want to smoke it and I don't think dabbing the kief into the chamber will work well.
 
ginolicious,

ginolicious

Well-Known Member
Sorry correction. I use vape and smoke interchangeably. I mean I want to vape my kief or crystal I call it. But don't want to have a layer of weed. I have over 4g
 
ginolicious,

ragnorak71

Well-Known Member
well then it is just a matter of screen size i suggest, fine mesh should stop the kief falling through
 
ragnorak71,

FluffMolotov

Well-Known Member
So is the verdict still strong on Santa Cruz Shredder?
I am looking at purchasing a 3 piece 'small' (that orange matte is yum) for my upcoming venture into convection portables . Been using this clone of a headchef mini grinder for my conduction vape with relative success, thus far:
http://i.imgur.com/gLLlOaf.jpg

Cheers
 
FluffMolotov,

FlyingLow

Team NO SLEEP!
Everyones tastes varies, but IMO SCS is the END of the road for my grinder searching. Perfectly fluff, and like most decent grinders, you can get as fine as you like with upside-down turning. Nothing I have ever had turns so freely- even when stuffed completely full with rock hard, dense material. Nothing I have owned ever stayed as free from sticking, making it really easier on my hands than any other grinder I have ever used.
 

MinnBobber

Well-Known Member
So is the verdict still strong on Santa Cruz Shredder?
I am looking at purchasing a 3 piece 'small' (that orange matte is yum)......
.................................................................
Like @FlyingLow, the SCS is IT for me too. The small 3 piece is great.

Just make sure you want that size as SCS small is about 2.1" diameter. I'd call it a medium.
 

FluffMolotov

Well-Known Member
I'm almost convinced I swear! Wish I knew someone with a higher quality grinder I could shake down, see the difference in quality from what I currently use. Most of my buddies still hand mulch - roll tobacco laced joints, whilst I'm gradually slipping into vapesnob territory :uhoh: (okay, full on immersion)...

It's a shlep finding an eBay seller willing to ship over the pond, might just have to suck it up and order from the SCS webstore. People spend that kind of currency on bottles of wine all the time, right?..

Right? :drool:
 

°k

The sound of vapor
I'm almost convinced I swear! Wish I knew someone with a higher quality grinder I could shake down, see the difference in quality from what I currently use. Most of my buddies still hand mulch - roll tobacco laced joints, whilst I'm gradually slipping into vapesnob territory :uhoh: (okay, full on immersion)...

It's a shlep finding an eBay seller willing to ship over the pond, might just have to suck it up and order from the SCS webstore. People spend that kind of currency on bottles of wine all the time, right?..

Right? :drool:
Welcome to FC.

Worry not about getting your SCS shipped across the Atlantic, sites like vapefiends or alibongo sell some in UK.
 

Tom Funk

Well-Known Member
I'm almost convinced I swear! Wish I knew someone with a higher quality grinder I could shake down, see the difference in quality from what I currently use. Most of my buddies still hand mulch - roll tobacco laced joints, whilst I'm gradually slipping into vapesnob territory :uhoh: (okay, full on immersion)...

It's a shlep finding an eBay seller willing to ship over the pond, might just have to suck it up and order from the SCS webstore. People spend that kind of currency on bottles of wine all the time, right?..

Right? :drool:

I got a SCS 3-piece a few weeks ago and couldn't be happier with it. Haven't used a space case or any of the other high end grinders but couldn't imagine them being significantly better.

The Other Side Vapes has a good reputation on FC, sells on ebay and ships overseas.

Another member also informed me that they bought from the seller in the link below and are happy. They ship OS too.

http://m.ebay.com/itm/201341116866

Buying from SCS themselves will cost you an arm and a leg in postage, although when I enquired about cheaper shipping on a small 4-piece they said they couldn't do better but could give me a small 2-piece as well to sweeten the deal. Their CS has been lacking in recent times though both in my own experience and that of others on the forum.
 

FluffMolotov

Well-Known Member
Checked out Alibongo and Vapefiend, neither had the 3 piece small... :shrug:
Shipping from UK would work out to the same price, if not slightly dearer to my spot on the map (FAR from Old Blighty :brow:)...
Preparing to SUCK it up, take a hit for the connoisseur in me!
 
FluffMolotov,
  • Like
Reactions: VegNVape

grokit

well-worn member
Top Bottom