All glass/ceramic pathway

Hi! I'm new here (well, if you don't count all the time I spent reading through the forums trying to figure out the best vaporizer for me. I have a few different medical issues and was approved for legalized medical use. I just haven't been able to find (and then order) a vaporizer because as I left, the Dr. told me that because of some lung issues I have had, I should really get a vaporizer that:

(1) has an all glass pathway and a ceramic heating element

and

(2) has a vapor that isn't too harsh (that has time to cool before reaching my mouth/throat.

I really have tried to do my homework ... like I said, I've read through many of the threads here and I've come up with several options. I guess I was just really hoping you guys could help me out by reading this and giving me your opinions on the 6 choices I've come up with.

I know the Da Vinci Ascent has an all glass pathway but I've read that many have had issues with the swing out bottom (going the wrong way) or the wires being twisted too much. I've also read that the unit just malfunctions and stops working, sometimes after only one month.

I was also looking at the Airizer Solo vs the Airizer Air. I'm confused as to whether or not these have an "all glass pathway" or not. I've tried to read up on both of these here but never came across a comparison of these two that helped me decide (based on by 2 most important criteria listed above.)
Then, after watching numerous youtube videos, I'm not sure if the vape would scorch my throat or if both of these have a rather cool temped vape. (lol... I feel I'd trust your opinions more than those I heard on Youtube!

I know that the Crafty has a great reputation, but it's very expensive and again, I'm looking for something where I won't be inhaling anything that has passed through plastic or metal.

Besides the 4 listed above, I noticed that some people really liked the Flowermate Pro or the Flowermate Mini. Again, I can't find whether or not the chaimber you put your herbs in is ceramic/glass.

The last thing I guess I should mention is that since I'll be using this for medicinal purposes, I don't need something that will produce tons and tons of vapor (I'll be by myself.) I'm not even sure how many pulls I should take each time (but I guess that's a question I should ask in the Medical thread ; )

Thank you for reading this! Any suggestions would be greatly appreciated since I need help in figuring out which one (or two) to order and I really should order something tonight (well, probably tomorrow given the time! : (
BTW, I said one or two because I've read what most of you have said about having a backup! So, I don't know... maybe that will be helpful when you are considering which "one (or two)" I should get.

I think you should check out the 7th floor silver surfer and the LSV. Or a vapolution 2.0 for a home unit. These three have glass vapor paths and ceramic heating elements. P.s. if money is tight, the vapolution starts at $99.
As far as a portable yes the arizer air has a ceramic heating element and a glass vapor path. I would not recommend the Ascent to you based on the silicone flavor mine still produces after a year of use. I have actually stopped using it due to that flavor it produces. Hope this helps

P.s.s. to make the silver surfer 100% glass vapor path would require the purchase of a glass wand.

LSV: ceramic element, all glass pathway whether you hit it dry or wet. The Cloud EVO is pretty nice too

Hi @new2medvaping, and welcome to FC!

I would think the Solo or Air are both worth considering as great portable vaporizers. They both have all-glass vapor paths, although the Air stem has a plastic tip on the end. Also, many of us like using stainless steel domed screens placed in the stem in order to use less herb, but that is entirely optional. The Air has a ceramic heating element and the Solo has a stainless steel heating chamber. I own a Solo, and in my experience, the vapor is not harsh at all if you keep the temperature below 200 C (or heat setting 5 on the Solo). At or above 200 C, there is the potential for harshness but that can be remedied by taking in less vapor at a time or by using a water tool to condition the vapor. The flavor is great with this vaporizer as well. And as for ease of use, well, it doesn't get much easier than the Solo (or Air). No learning curve with this vape -- just load it, turn it on and set the temperature, wait for it to heat up, and effortlessly pull as much vapor as you need.

However, in the end, only you can decide what qualities you're looking for in a vaporizer. I love the Solo, and think it would probably work great for you. But that doesn't mean you have to agree with me. There's plenty of good, quality vaporizers out there to choose from. Good luck in making your decision, and let us know what you end up choosing!

If the pathway is all glass it should not matter what the heater is? Don't get trapped by the doc's advice. I don't consider the LSV or SSV to be all glass. You are drawing off a heating element?

The VRIP wand is all glass with a ceramic heater encased in glass.

You did not say how much you want to spend?

There are few vapes that have a heating element covered by glass.

If you have troubled lungs I doubt you want to hit vapes with resistance. I think this would eliminate portables? Have you thought about eating cannabis?

I would go with a high watt vape.. something where you don't need warming hits or milking bowls. An under powered vape will make it so your lungs have to work harder.

Temperature control is important to me. If my lungs are feeling stressed I have the control to move the vape down 10 degrees. It has been very beneficial tuning the vape so I don't over do it. I remember the first time I got super ripped and my lungs were not stressed at all. Up until that moment I thought that my lungs had to feel tight in order for me to get ripped. It felt bizarre the first time, now it is the norm.

Good luck!

Sorry ... like I said, I'm new here to this!!! : )

...

new2medvaping said:

the Dr. told me that because of some lung issues I have had, I should really get a vaporizer that:

(1) has an all glass pathway and a ceramic heating element

Click to expand...

Most heaters are ceramic and the ones that aren't are either just as safe, and/or they're isolated from the vapor path. Heater material just isn't an issue these days. As for an all glass air/vapor path, that isn't necessary. If you limit yourself to models with a glass mouthpiece for instance, to get that 'all glass' setup, you'll be screening out a lot of good models. By the time vapor gets to the mouthpiece, the temp has dropped way down from vaping temp, and high temp plastic, silicone, etc., are perfectly acceptable materials. Your doc should stick to medicine and let FC be your vape expert.

Agree with max that your Doc may be out of his wheelhouse on this one.

If you have lung issues you may want to stay away from silicone tubing. Most of the tubing itself is safe (and you can certainly purchase food grade high temp stuff), but it tends to get dirty pretty fast. And, when it is dirty it is VERY sticky so likely to pick up all kinds of stuff inside and is hard to clean. Add some moisture and it could be quite the breeding ground for who knows what. Not a concern for many, but may be in your case.

Not sure about the LSV (still dying to try one), but could fit the bill nicely if it can hit as lightly as you may be looking for.

I'd suggest the nano or another log vape. They can deliver lighter hits, or big clouds. The issue for you may be cooling the vapor.

Not sure if a water piece would be OK for you - again because of lung issues. A few different opinions around here on that one. Maybe not an issue if you use it dry. This would cool vapor without introducing issues that could come from vaping through water. Or, you could cool vapor well with a j-hook set up. Really all you'd be trying to do is put a little distance between heat and your mouth. A dry bubbler or j-hook can usually be cleaned well without much effort. To some extant, it would depend on the bubbler itself. Those with all kinds of crazy glass inside can be tough to clean. Simpler ones, not so much.