• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

flotntoke

thoroughly vaped
There ya go! Plenty of people who don't know about this thread (or even FC) would love to have that piece for $150. Nobody is saying it's US glass, so IMO no fast one. Just commercial business at its finest.

IMO if you get a something that makes it in one piece, functions well and you enjoy using it for less than $50 - you're doing pretty damned good! :tup:
 
@Melting Pot Is that even Steven's skyline he has in the back of his shot. I have seen dhgate watermarks on there pics so they prob do not even have the glass yet or they are so lazy they can't take their own photos. Take it fo what it's worth.
 
ConstanlyConcentrated,

420boi

Well-Known Member
AWESOME idea!!! There are already plenty with pics in this thread to start with. Let us know when you set it up.



ARGH!!!! I had made my mind up to NOT get this after the issues that were reported. Now I feel almost obligated. So torn, and all of my other glass is looking lonely again. They whisper every time a slight breeze goes across their mouthpieces or GonGs.... "Go ahead, you know you want more glass."



Huh? If $45 is overpriced, what would you call the exact same piece for $150 at a LHS?

no i mean steven's torus is overpriced compared to ccg's (its literally double the cost)
 
420boi,

Frederick McGuire

Aggressively Loungey
no i mean steven's torus is overpriced compared to ccg's (its literally double the cost)
Steven is also the only seller I know of who's actually producing stuff FOR US.

It seems to be paying off with all the new designs and such, but they still actually have to do some R&D on these pieces too, even if it's a knockoff.

Just look at how many designs the Taurus had to go through - that's time and materials cost that steven needs to recoup...

I personally think Stevens items tend to have bicker glass too, but I can't confirm that...

basically, IMO, no, Steven isn't overpricing his stuff...
Some of it may be getting a bit more expensive, but they are intricate designs, or large items etc...
 

HomeFree

Well-Known Member
The Delta 3D Studios Crafty adapters work great with eCigs. He also sells a universal adapter which would probably work as well. I have used them with both the FC-Cake (see pic) as well as a Sunshine Store PNWT which is similar to that nectar collector.

Sasquach, that looks awesome! I bet a lot of people would buy those if ratchett (I think it is ratchett) would promote them more, maybe in the ecig portables area? maybe he already does.

I have inverted a glass globe style into a female 14 mm inlet on my D020 in the past that has been broken for a good while unfortunately. Worked pretty nice, left the glass globe part on I THINK - can't really remember, but I think you can do it without the globe part because of the rubber grommets on the atomizer attachment. I have even tried using a regular ecig through it as well, which is pretty tasty and I didn't even think would work well. But not much reason to run an ecig through a bong other than to see what it is like.

Recently I saw a bubbler made especialy for those atomizer types, and it was affordable too - less than $30 delivered. Can't remember where I saw it. Oh yeah, on ineedhemp.com - divinetribe. I think that's where I saw it. I was thinking about making an order over there for a friend and I to save money on shipping, so I might pick one up.

http://ineedhemp.com/images/DSC05567.JPG

$23
 

420boi

Well-Known Member
Steven is also the only seller I know of who's actually producing stuff FOR US.

It seems to be paying off with all the new designs and such, but they still actually have to do some R&D on these pieces too, even if it's a knockoff.

Just look at how many designs the Taurus had to go through - that's time and materials cost that steven needs to recoup...

I personally think Stevens items tend to have bicker glass too, but I can't confirm that...

basically, IMO, no, Steven isn't overpricing his stuff...
Some of it may be getting a bit more expensive, but they are intricate designs, or large items etc...

yea i agree, but provided ccg's torus functions properly, id take it over steven's anyday for half the price.
 
420boi,

Melting Pot

Sick & Twisted
@Melting Pot Is that even Steven's skyline he has in the back of his shot. I have seen dhgate watermarks on there pics so they prob do not even have the glass yet or they are so lazy they can't take their own photos. Take it fo what it's worth.
I can't answer that, I buy from china.
I don't know how I stumbled on that site, never bought from them.
They say american blown right on site. And not trying to pass off as originall.
Wouldn't be the first lie I ever read.
 

S1N3

Tarzan @ KloudSociety
yea i agree, but provided ccg's torus functions properly, id take it over steven's anyday for half the price.

Would you mind buying the CCG egg and posting a video then? :lol: The thing is, ccg posted has a picture of a original mothership, not even their own design which leaves me skeptical.

Seeing as how many people tried and failed at the incycler functionality ie this one, and the WOL Torus being so-so in functionality, I think the price from Steven is fair. Add in a $5 coupon from DHGATE and it's slightly more tolerable. Though I do hear you, it is a little on the pricey end but given the original MSRP, I think it was a nice acquisition for my enail. But still my preference to the Straight Fab.

As others mentioned the Torus is in like its 5th iteration (2nd production release) but there were 3 betas as well as a lot of perc discussion. Changes to the can, now it is hourglass etc. All that R&D costs $$$ But that's my :2c:
 

flotntoke

thoroughly vaped
I can't answer that, I buy from china.
I don't know how I stumbled on that site, never bought from them.
They say american blown right on site. And not trying to pass off as originall.
Wouldn't be the first lie I ever read.

Definitely missed where they say American blown on that site. If they do, obviously no good and a serious issue. Still think it is a nice price for the piece if you've never seen this thread or heard of DHGate - as I doubt most stoners have.

My LHS has a bunch of cheap Chinese crap (most not as nice as popular pieces here) and all is outrageously overpriced. They'd probably be charging closer to $200 for this one. They always have at least one D-020 type piece with a big "Only $99" sticker on it. I only go in there to pick up other "hippie shit" - never any real vaping/smoking accessories.

Every time I'm in I take a look at the back room and ask if the crap Chinese pieces are US blown. I usually hear, "Not sure, but I think so." Once was told "It's not US, but I think it's blown in Eastern Europe with German glass. They make the best glass stock." And, only once in 7 or 8 times over past couple years, "Pretty sure it is from China", of course that was closely followed with "you probably want one of these better pieces," mostly from "lesser" (for lack of a better term) US and Euro companies - all priced close to double what they can be found for online.

Buyer beware, do your research and everything else all of us here already know. But, this place is pretty much the only one around and has been for years. I'd say 1 in 4 people I see in the back room pick up something, so they're selling shit. Even saw one guy get an EQ for $250 and was very happy he talked them down from $279. Since he seemed to be quite the dick, I just chuckled. But, did hang out a little longer than usual to watch the deal go down. Kind of entertaining since it wasn't my $250!

What I'm saying is we do pretty well with what we get and how cheap it is. Certainly plenty of info here to figure out if you want to buy a piece from Steven for a few more bucks, or go with CCG for less - or someone else for even cheaper. But, I don't think I've seen anything touted here that I'd call "overpriced". Higher priced? Yeah, sure. Some depends on quality and work involved to get it to where it is, some just pure profit. Same as with pretty much anything you spend your money on. Welcome to the world of capitalism!
 

Melting Pot

Sick & Twisted
Definitely missed where they say American blown on that site. If they do, obviously no good and a serious issue.
Just went on that site for a min. Thought I was totally vaked.
Clicked on fab egg then click description, says
Mother ship design
Made in U.S.A
Just for record I'll be saving funds straight fab & torus from Dh I'll just see who u guys recommend. Lol
I've bought from Kathy & Steven. Both pieces doable
I don't expect much from them.
The usual not broken, what I ordered,no leaks,or cracks.
 

blazedd

Well-Known Member
Buyer beware, do your research and everything else all of us here already know. But, this place is pretty much the only one around and has been for years. I'd say 1 in 4 people I see in the back room pick up something, so they're selling shit. Even saw one guy get an EQ for $250 and was very happy he talked them down from $279. Since he seemed to be quite the dick, I just chuckled. But, did hang out a little longer than usual to watch the deal go down. Kind of entertaining since it wasn't my $250!
damn.. and I thought I was overpaying 4 years ago at 220 on my credit card.. to think someone would actually pay 250 TODAY for an eq.. lmao
 

VapedNBaked

Member
I was looking for a dcycler, does anyone here got this one?
http://www.dhgate.com/store/product/new-glass-recycler-amazing-vortex-bongs-glass/242969329.html
new-glass-recycler-amazing-vortex-bongs-glass.jpg


A vortex video would be nice :)

Edit: The product page says 8.9 inch / 14.5mm. But I think it looks higher and also more like 18.8mm. I just contacted cnmengglass...
 
Last edited:

wildything

Well-Known Member
growhardorgohome420
hey so I've been seeing these painted glass eggs here and there. What do you guys think about these being painted intend of actual colored glass? Idt anyone actauly realized it is painted yet
 
wildything,

420boi

Well-Known Member
I was looking for a dcycler, does anyone here got this one?
http://www.dhgate.com/store/product/new-glass-recycler-amazing-vortex-bongs-glass/242969329.html
new-glass-recycler-amazing-vortex-bongs-glass.jpg


A vortex video would be nice :)

Edit: The product page says 8.9 inch / 14.5mm. But I think it looks higher and also more like 18.8mm. I just contacted cnmengglass...

interesting, i like the look of the joint. seems to be fewer but larger slits? I think i would prefer the regular dcycler mouthpiece on this instead
 

East808

New Member
Sup sup guys! Been lurking here for a couple weeks. Wish I found this place sooner! Anyways I fell in love with the look of Stevens Straight Fab. Despite some of the negative experiences I've read recently re: him, I decided to support him anyways. If he really is working with the community on designs/improvements, then that is worth supporting. Hopefully it makes it here safely tho. I been eyeing up the fc cake and another design for a friend, so hopefully the "test buy" works out.

I also ordered the cmeng egg (actually all of this shit like on 6/12) And omg did that egg ship out like same day. After seeing someones post of the Sunshines even bigger egg, I kind of want to try that one lol!

The straight fab got like 9 more days b4 it ships :( does it normally take that long? I believe I ordered other stuff from Kathy that said it would take a few days to ship, but ended up shipping same day. Hopefully I can get an accurate idea of what it's like to dab onto ceramic without springing for a hive nail. Believe I got a couple of Ti, ceramic, and quartz bangers from Kathy to try sample. Half of which shipped same day. The other half says tomorrow... I hope most of my shit gets out of the country b4 their holiday :( I've ordered from China b4, (fasttech) but I think I only used like.... Honk Kong Post or SGP which was like 10-20days to Hawaii. I can't wait for the vapemail to arrive!

Glass research/purchase - Check!
Enail research/purchase -in progress! (Thinking of getting the newest Auber unit...) But not sure about the actual nail/material preferred/ and therefore coil size.
 

Frederick McGuire

Aggressively Loungey
Sup sup guys! Been lurking here for a couple weeks. Wish I found this place sooner! Anyways I fell in love with the look of Stevens Straight Fab. Despite some of the negative experiences I've read recently re: him, I decided to support him anyways. If he really is working with the community on designs/improvements, then that is worth supporting. Hopefully it makes it here safely tho. I been eyeing up the fc cake and another design for a friend, so hopefully the "test buy" works out.

I also ordered the cmeng egg (actually all of this shit like on 6/12) And omg did that egg ship out like same day. After seeing someones post of the Sunshines even bigger egg, I kind of want to try that one lol!

The straight fab got like 9 more days b4 it ships :( does it normally take that long? I believe I ordered other stuff from Kathy that said it would take a few days to ship, but ended up shipping same day. Hopefully I can get an accurate idea of what it's like to dab onto ceramic without springing for a hive nail. Believe I got a couple of Ti, ceramic, and quartz bangers from Kathy to try sample. Half of which shipped same day. The other half says tomorrow... I hope most of my shit gets out of the country b4 their holiday :( I've ordered from China b4, (fasttech) but I think I only used like.... Honk Kong Post or SGP which was like 10-20days to Hawaii. I can't wait for the vapemail to arrive!

Glass research/purchase - Check!
Enail research/purchase -in progress! (Thinking of getting the newest Auber unit...) But not sure about the actual nail/material preferred/ and therefore coil size.
Usually on the listing on dhgate it will have a note somewhere saying something like "seller will take XXX days to ship"
I've found they usually leave it until the last day possible, but sometimes they beat it :)

I'd suggest just messaging steven, and politely asking if he can try to get it out before the holiday.

Also, without being pushy about it or anything I'd mention you're on FC.
Just throw in a line like "I can't wait to receive my piece and put a review on FC"
I like to think he tries a little bit harder for orders he knows are going to FC members, but thats purelymy own speculation...
 

J_ackson

It's always sunny in Colorado
American made maybe?
Or a LHS trying to pull a fast one. (very possible)
Found this place
http://www.rosintech.net/product/othership-torus-water-pipe/

A simple who-is request returns this:
Expires On
March 19, 2016

Registered On
March 19, 2015

Updated On
March 19, 2015


Just the name tells me that the guy just wants to make quick money.

He is probably dropshipping those pieces, meaning that you will pay 3 times the price you could on DHGate - and we all know that those pieces all comes with at least 1 imperfection, most of the time they are half done slits, crooked mouth pieces and that affects the quality a lot.

Do you think this guy will actually replace your piece when they send you a white one instead of an all clear one from his own house in the US? I doubt it.

EDIT: He has no picture of his 'product', they are all taken from the listings on DHGate and his tutorials are just copy pasted links from YouTube, just a heads up! Nothing american made on that website.
 
Last edited:

MGG

Well-Known Member
other_1056043599_00.jpg


other_1056043484_00.jpg

does anyone have any recommendations for this piece? iv already asked for it to have the perc welded to the bottom, to put the neck support back, also asked for the old neck back because i think this one is ugly.

that looks nice, i'd like to see a fab egg with a proper decent sized chamber, that one looks alright though
i always find pics deceiving, what are its dimensions? I'd really like to see a proper sized fab egg.
 
Top Bottom