E-Nano from Epickai
Vapor Loop
Well-Known Member
\
Before i say how long for me i must say it was my own fault, But i been trying to get a replacement since march, It should be here tomorrow.
I finally noticed after quite some time i never registered my nano.
I did that and pretty much immediately got a Rma. I feel like the village idiot now. I flat out made myself go without a nano on 420.
dimildarko
Well-Known Member
Any interesting concentrate methods put there guys? I've tried out the bud sandwiches and straight cotton. Just wondering if anybody found any other great ways to enjoy concentrates with this beast?
Personally I find myself heating up my quartz banger for wax just because it is so insanely quick. But I really do like the taste through the cotton in a GonG.
Personally I find myself heating up my quartz banger for wax just because it is so insanely quick. But I really do like the taste through the cotton in a GonG.
Have you tried degummed hemp fiber?
Hi all, been vaping for 5 years+ now...my previous vapes have all been portable....first time using desktop with E-Nanao + D020-D since last week. Quite impressive so far, couple of questions as I come upto speed.
1. The ABV looks close to black and a little uneven, I run mine at 6.5-7.0. I use the fixed screen all glass gong so cannot increase distance between herb and heater. Is this normal, feel like I may be combusting..any tips?
2. After a few uses, seems like having a carb would be easier to use with the water tool. Where can i buy a gong or better still a wong with carb for the E-Nano
1. The ABV looks close to black and a little uneven, I run mine at 6.5-7.0. I use the fixed screen all glass gong so cannot increase distance between herb and heater. Is this normal, feel like I may be combusting..any tips?
2. After a few uses, seems like having a carb would be easier to use with the water tool. Where can i buy a gong or better still a wong with carb for the E-Nano
dimildarko
Well-Known Member
I have not. I assume it's used in the same manner as cotton? Do you have a link to a good source?
TeeJay1952
Well-Known Member
post: 805267, member: 7966"]Hi all, been vaping for 5 years+ now...my previous vapes have all been portable....first time using desktop with E-Nanao + D020-D since last week. Quite impressive so far, couple of questions as I come upto speed.
1. The ABV looks close to black and a little uneven, I run mine at 6.5-7.0. I use the fixed screen all glass gong so cannot increase distance between herb and heater. Is this normal, feel like I may be combusting..any tips?
2. After a few uses, seems like having a carb would be easier to use with the water tool. Where can i buy a gong or better still a wong with carb for the E-Nano[/QUOTE]
Try varying your draw. If you do a continuous hard pull overheating pipeline is a possibility. Doing a slower draw or a wa wa (milkshake ) draw allows heat to build, clear, build, clear over and over again.
Joda was blowing carbed gongs but I am unsure if they are still available
http://fuckcombustion.com/threads/joda-glassworks.13915/page-114
1. The ABV looks close to black and a little uneven, I run mine at 6.5-7.0. I use the fixed screen all glass gong so cannot increase distance between herb and heater. Is this normal, feel like I may be combusting..any tips?
2. After a few uses, seems like having a carb would be easier to use with the water tool. Where can i buy a gong or better still a wong with carb for the E-Nano[/QUOTE]
Try varying your draw. If you do a continuous hard pull overheating pipeline is a possibility. Doing a slower draw or a wa wa (milkshake ) draw allows heat to build, clear, build, clear over and over again.
Joda was blowing carbed gongs but I am unsure if they are still available
http://fuckcombustion.com/threads/joda-glassworks.13915/page-114
Are you stirring the loads at all? Black is fine as long as it's not ash. If it continues to smoke after the Nano has been removed, you've combusted!
Otherwise you're fine, try loading less herbs in your stem
Yes use in the same manner as cotton. The hemp provides a more earthy flavor than cotton
http://www.hemptraders.com/product-p/f-dg1.htm
hweezi
formally cwheezy
Hmmm you gave me an idea:
A little more permanent but it works so far!
Haha, yeah I couldn't do that to my pick. To handy to give up
This will work, but have to be very careful not to get too close. And, sometimes hard to get it small enough and still get a full hit. Well worth the effort though!
When I play with it like this I find it easier to load first, then adjust screen up. Either hover the nano, or push down and pull real quick to be sure you don't hit the load. If you do hit the load, it should get pushed down almost far enough. Then give it a little nudge with your tamper and enjoy.
Don't really notice too much flavor increase from micro load. It is mighty tasty, but probably about the same as 2/3 hit load size if you stir every hit IMO.
Still like 2/3 hit best wet or dry, but smaller loads are fun.
Also, have been enjoying some larger loads dry. This J-hook I got from yeti glass combined with Joda carbed GonG really seems to be working well with the larger ones. Load probably close to double a 2/3 hit load, turn heat down a little (5.75 on mine), and sit back and puff it up like I'm f'n Gandalf or something! When flavor starts to drop I pull the nano, give it a good tamp and stir, and go for another round. Flavor not quite as good after first few hits as with smaller loads, and hitting it much lighter and shallower than I would through bubbler, but a nice way to kick back and watch a movie or a game or whatever. If I take it easy I get 10, sometimes 12-13 hits before reloading.
EDIT: I just loaded up the J-hook and took another look. Probably about 2.5 times the size of a 2/3 hit load. Not sure exactly how many hits, yet. Still working on that part, but it goes for a while.
I still haven't tried pushing the screen up but I'd like to say that I'm just going to keep it under 7.25 at all times (well not concentrates). Last night, even with the screen pushed down further, it still combusted at 8. It's definitely something you have to keep an eye on. 2-3 hours at 8 seemed fine all night then when I was going to bed 'round 12 it just poof'd on me.
I tried the j-hook method you mentioned, it's reaaally nice. You think its gonna be a rough hit but it's really not.
Last edited:
nano-macro
Well-Known Member
Wow... It was seeming like I was getting a tolerance to vaping at a certain temp level... so I took some advice I saw on another forum of raising the heat a bunch while using with a vape and adjusting the screen much farther away from the heat. I don't have an adjustable gong because I was short on cash to get both types when I ordered, but I do have the stock adjustable dry stem.
I figured it was worth a shot to try to hold the dry stem (with the screen about 1.4cm past stock screen height) to my mini bong. It works perfectly if not a little precarious if not careful. I haven't been this blazed in a bit since I was getting used to the same temp range of 6-6.5. Raising it to 7.5 with the increase in distance from heat allowed a better extraction. Or at least just a different extraction.
I forgot my discount code for accessories so I emailed nadia to ask for a new one, hopefully she can hook me up since I definitely want to order some more screens and an adjustable gong.
I'm vaping a blend of xj-13, snow cap, durban, space queen and spacequeen x OG kush. Just this one variance has brought back a bit of potency.
I figured it was worth a shot to try to hold the dry stem (with the screen about 1.4cm past stock screen height) to my mini bong. It works perfectly if not a little precarious if not careful. I haven't been this blazed in a bit since I was getting used to the same temp range of 6-6.5. Raising it to 7.5 with the increase in distance from heat allowed a better extraction. Or at least just a different extraction.
I forgot my discount code for accessories so I emailed nadia to ask for a new one, hopefully she can hook me up since I definitely want to order some more screens and an adjustable gong.
I'm vaping a blend of xj-13, snow cap, durban, space queen and spacequeen x OG kush. Just this one variance has brought back a bit of potency.
hweezi
formally cwheezy
i kept my code but it said it expired.
jfrsn
Well-Known Member
I keep my nano around 7.25-7.5 for flower brother seems like the sweet spot.
max for concentrate.
flotntoke
thoroughly vaped
I've used the hemp (better than cotton IMO) and lately have been playing with stainless steel wool. It's OK, but gets a bit messy. Haven't tried it myself yet, but think a few people had some success using concentrate pads from other vapes. Some customization may be needed to get those to fit into your GonG. IIRC, volcano concentrate pads are what supposedly had best results, but others were using Herbalizer aromapads. Do a search on any of these in this thread only for more info. Many sources for any, but here's a cheap one for each.
SS wool on Amazon
Volcano concentrate pads on eBay
Herbalizer Aromapads on Herbalizer site
1. Play and go with what you like, but I'd suggest you give a fair shot to lower heat with closer and smaller loads. Different strokes for different folks and all, but no reason you can't use your nano at whatever setting you like. No need to be at 6.5 and above. IMO black ABV means you're getting some rough vapor in your load. Mine is dark brown at it's darkest with regular use. Best flavor and headiest effects can be found at lower temps, and your ABV comes out brown. Sort of like any other vegetation that has dried out.
2. For carbed GonG check out Joda and be prepared to wait a while. He's slowed up on customs quite a bit. For a wong, check out Ed's TNT, but think you'll have to drill the carb hole yourself. Also, Oregon Glass Blower on iOffer sells a carbed M>F adapter. IMO for a bubbler you're best off just using stock Epic GonG. Roll the silicone down on to itself so it creates a ledge. Use ledge to pull nano and GonG at same time with one hand. Simplest and gives the most wide open clear. It's not hard and after 5 - 10 good sessions it becomes second nature.
I think different extraction is where you are seeing most of the effects. Cranking up the heat releases different actives. I dunno..... I been smoking and vaping for more than 35 years now and don't really get much of the tolerance issues I see discussed on FC so much. IMO a few solutions here.... vape less and get your tolerance down. Vape more and get to the same place with your tolerance where it is. It will all level out eventually. Vape better shit and/or change your strain every week or so and your tolerance won't matter as much!
My tolerance isn't nearly as high as it was in college when I couldn't even manage making coffee or getting a shower in the morning too well without a couple good bong rips, but it has been lower plenty of times since too. If you can't manage your tolerance as it relates to your stash, might want to try some shots or slamming beers. Nothing personal to you @nano-macro . Please don't take it that way! But, the whole "my tolerance is getting too high" bit just baffles me. Learn to control your shit with your available resources or move on to something stronger. I hear H is cheap and plentiful these days. JUST KIDDING!!!! Stay away from that shit kids! But seriously, it really isn't that hard. There are more than a few old school vapers on here that go through a gram a week. I probably go through 2 to 3 times that while having a good buzz a couple times a day average and keeping my girlfriend stoned a few days a week, too. Sorry... end of my old man rant here.
Generic discount code is the same for all and has been same for a few years. Probably listed once every four or five pages for the past 350 or so. It is kind of hard to remember though
....... FCLOVE gets you 10% off.Again, to each his own and all that. And, admittedly no two nanos are the same. But, if you're looking for good advice on using your nano it might be a good idea to poke around the now 500 pages of this thread and get some info from folks who have been vaping with this puppy more than a week or two. Just sayin....
Holy shit!!!! Did I just read and type that right?
500 pages?!?!?! WOOOOOO FUCKIN HOOOO!!!
That is cool as shit! Thanks to all who have helped us get here!
Last edited:
nihil
Member, Known Well
JoDa would be your best bet for a carbed GonG, but you may have a lengthy wait. You can also get a carbed 18mm M/F adaptor from @Oregonglassblower to use with your current GonG (I'm assuming you have one since you mentioned using it with the D020-D (great bubbler by the way)).
I posted a picture of both in this thread on Saturday if you want to get an idea of the setup (Edit: Link). In my case I was using both, so the JoDa is on the top and the OGB is on the bottom. You can't go wrong with either, they are both solid vendors with good reputation around here.
For what it's worth, carbed is the only way I roll now. It makes for easy vaping and the enano can sit there heat soaking between hits. Another plus? When friends are over that haven't used the enano, it is very easy for them to get it on the first try.
flotntoke
thoroughly vaped
Gotta plug it again, one more time. Really hard to beat the stock Epic GonG with rolled down silicone. Get all you need for less than $15 within a week usually. Roll down silicone for easy pull. Just drop a finger down to catch the ledge and lift all at once. Of course, I'm not a real heat soaking fan except for about 10 seconds on first hit of a load. I know science isn't in my favor (with heat rising and all), but still don't like leaving the nano sitting on top for more than 20 seconds if heat is above 6. Probably doesn't hurt much, I just get a little wiggy about my load roasting while I'm not hitting it. Also, do it all the time while going dry at 5.5 - 5.75 with nary an issue.
One thing I will definitely concur with @nihil on this, though. Carbed gong makes it MUCH easier for a noob or clutz to use. So if you vape with friends who think that smoking schwag through their multi-colored, $30, acrylic bong with the metal bowl and rubber grommet is the shit; OR if they are the ones who are always breaking shit, carbed GonG under nano is the way to go!
nihil
Member, Known Well
And to counter as well as agree with @flotntoke, I used to be that guy. Remember those metal pipes with threading back in the 80's & 90's? You'd stick a small piece of bud in the stem to resonate it for later? Yeah, I probably still have one in a box somewhere. We also used to make homemade pipes out of beer cans. Thankfully I've come a long way since then.
And yes, I do believe in keeping it simple. My problem with the stock GonG was that I'd drop the nano once a month or so (alcohol was usually involved). With the carbed, I can take 2 or three hits, stir, one more, then dump. It did give me pause when I first learned about heat soaking, but since then I've accidentally heat soaked for over 20 minutes with no adverse effects.
So yeah, whatever works best for you. That's what I love about this vape, you have options.
Another cool nano tip: I just got into dabbing and have some shatter. Normally I'd hold it between two fingers wrapped in wax paper to heat and loosen it up. A few days ago I had a thought.. I pressed it against the warmed up nano for about 15 seconds, and done.. it was the perfect viscosity to get on my glass dabber.
And yes, I do believe in keeping it simple. My problem with the stock GonG was that I'd drop the nano once a month or so (alcohol was usually involved). With the carbed, I can take 2 or three hits, stir, one more, then dump. It did give me pause when I first learned about heat soaking, but since then I've accidentally heat soaked for over 20 minutes with no adverse effects.
So yeah, whatever works best for you. That's what I love about this vape, you have options.
Another cool nano tip: I just got into dabbing and have some shatter. Normally I'd hold it between two fingers wrapped in wax paper to heat and loosen it up. A few days ago I had a thought.. I pressed it against the warmed up nano for about 15 seconds, and done.. it was the perfect viscosity to get on my glass dabber.
flotntoke
thoroughly vaped
Hell... we all used to be that guy. But, I'm blaming it all on weed-tech in its infancy! Then again, I'm sure there are still plenty of teenagers out there who crush a can, poke some holes in it with a pin, and are psyched to have an instant, disposable bowl. Hate to derail and waste even more space on the 500th page! Bet there is a thread around here somewhere for such shit, and if there isn't there should be!
Back on topic... me thinks you just needed more practice. On occasion when I don't have to drive, I do get a bit tipsy. A few times recently, double vision tipsy! Only two ways I know out of that mess. Sleep of course, or get on that nano! It'll usually cure what ails you.
Like the shatter tip, too. Though I usually just stab a little chunk and am good to go.
ataxian
PALE BLUE DOT
I look everyday for my new NANO to arrivè.
MISSING it is a understatement!
Chezgreendream
First the flavor, then the buZzz settles in....
Hello everyone, I have been gone for a moment, been busy but luckily my e nano has been keeping me company. I have a few questions, maybe someone would be so kind to answer or give their opinion. I would greatly appreciate it.
1) Is there any way to connect the e nano to the charging ports in my vehicle? Does it heat up the same or does it take longer?
2) I been having a dilemma lately, if I use my e nano at 6.5 with the standard distance I feel as if I am doing too much work to draw vapor using my d020 water tool. But if I up it to 7 then I get effortless vape but it darkens the bud pretty quick, like almost black. I have messed with the draw speed and distance to no avail. I dont want to pull until I am out of breath to get vapor, neither do I want to roast it, any more recommendations?
3) This one might be my most important question, Are there any hydrotubes that I can use for the e nano, or can anyone recommend a set up? I am looking for something similar to this, that I saw attached to the Arizer Air. Would I have to have it custom built? What I am really looking for is a bubbler type stem/pipe similar to this, I saw a video of a guy using it on this forum but I cant remember where. If not these hydrotubes look interesting.
1) Is there any way to connect the e nano to the charging ports in my vehicle? Does it heat up the same or does it take longer?
2) I been having a dilemma lately, if I use my e nano at 6.5 with the standard distance I feel as if I am doing too much work to draw vapor using my d020 water tool. But if I up it to 7 then I get effortless vape but it darkens the bud pretty quick, like almost black. I have messed with the draw speed and distance to no avail. I dont want to pull until I am out of breath to get vapor, neither do I want to roast it, any more recommendations?
3) This one might be my most important question, Are there any hydrotubes that I can use for the e nano, or can anyone recommend a set up? I am looking for something similar to this, that I saw attached to the Arizer Air. Would I have to have it custom built? What I am really looking for is a bubbler type stem/pipe similar to this, I saw a video of a guy using it on this forum but I cant remember where. If not these hydrotubes look interesting.
Last edited:
421
Well-Known Member
A long heatsoak at 6.5 before hitting could help with the lack of initial vapor
Chezgreendream
First the flavor, then the buZzz settles in....
421
Well-Known Member
Place nano on GonG but don't hit it. Just leave it there for about 30 seconds. Then hit it. What it does it heat up the glass so there's more energy to the load and less heat loss as the air travels thru the GonG.
I have a carbed WonG. First off, they are beautiful. I have a few usabilities with it though.
First of all, the screen is not adjustable at all and is place very high in the bowl. That means you are forced into some pretty miniscule loads. This isn't a con depending on your perspective, but it bothers me.
The big problem I have with it is the Nano can't sit on the WonG like it can with the GonG. The WonG doesn't quite make an airtight seal with the Nano, so you have to hold it above the bud instead of letting it rest. This causes performance to take a hit when using larger pieces.
First of all, the screen is not adjustable at all and is place very high in the bowl. That means you are forced into some pretty miniscule loads. This isn't a con depending on your perspective, but it bothers me.
The big problem I have with it is the Nano can't sit on the WonG like it can with the GonG. The WonG doesn't quite make an airtight seal with the Nano, so you have to hold it above the bud instead of letting it rest. This causes performance to take a hit when using larger pieces.