Oregonglassblower (mike) Custom Glass Adapters and Accessories

Snappo · Jun 1, 2015

I must deeply apologize to all here, Mike, and to Joda Glassworks ...I unintentionally helped fuel a fire here on this thread the other day. The fallacy of my argument was that I personally failed to recognize the distinction between a carbed adapter and a carbed Gong - those two items are for some stupid reason always blurred in my mind as one and the same accessory. Clearly they are two very different things, and the carbed Gong is definitely the brain child genesis of Joda Glassworks - AND SHOULD ALWAYS BE RESPECTED AS SUCH! Again, my sincerest apologies!

dimildarko · Jun 1, 2015

I've purchased a few adapters from OGB over the past few weeks but this new carbed 18/18 is my new favorite. I just received it today and it is awesome! I'm using it with a Epic GonG and a reclaimer from OGB on top of a D020-D.

Traaaaan · Jun 3, 2015

Edited. Pm will be sent.

subway13029 · Jun 4, 2015

So are the carbed adapters able to be used with any setup?like I hook it on to my bubbler and then set desired vape on top and then just use carb instead of removing vape to clear?I like I like if it is..I have broken many of reducer by lifting my vape to clear and the reducer sticks and falls and boom..so I feel so behind the times..lol

Oregonglassblower · Jun 4, 2015

subway13029 said:
So are the carbed adapters able to be used with any setup?like I hook it on to my bubbler and then set desired vape on top and then just use carb instead of removing vape to clear?I like I like if it is..I have broken many of reducer by lifting my vape to clear and the reducer sticks and falls and boom..so I feel so behind the times..lol

Hey there. Yes it can be used with any setup and i can make them any size needed. Thanks,Mike.
http://oregonglassblower.com/18mm-Glass-Adapter-With-Carb-18M-18F-18m18f-C.htm

ataxian · Jun 4, 2015

Oregonglassblower said:
Hey there. Yes it can be used with any setup and i can make them any size needed. Thanks,Mike.
http://oregonglassblower.com/18mm-Glass-Adapter-With-Carb-18M-18F-18m18f-C.htm

Hey Mike I have FC187 with mouth piece that's too big!
Can you remove the mouthpiece and put a 18mm male fitting?

I want to turn it into a ash collector!

NickDlow · Jun 4, 2015

ataxian said:
Hey Mike I have FC187 with mouth piece that's too big!
Can you remove the mouthpiece and put a 18mm male fitting?

I want to turn it into a ash collector!

I'd like to know as well for a similar application.

Also Mike, do you make dropdowns? I don't believe I've seen any yet from ya. Thanks

Oregonglassblower · Jun 4, 2015

NickDlow said:
I'd like to know as well for a similar application.

Also Mike, do you make dropdowns? I don't believe I've seen any yet from ya. Thanks

Hello. yes i do make drop downs. here's a link. I can make them longer if needed.
http://oregonglassblower.com/14mm-DROP-DOWN-ADAPTER-14dda.htm

Oregonglassblower · Jun 4, 2015

ataxian said:
Hey Mike I have FC187 with mouth piece that's too big!
Can you remove the mouthpiece and put a 18mm male fitting?

I want to turn it into a ash collector!

Sorry i couldn't help on this one but i don't rework existing pieces.

NickDlow · Jun 4, 2015

Oregonglassblower said:
Hello. yes i do make drop downs. here's a link. I can make them longer if needed.
http://oregonglassblower.com/14mm-DROP-DOWN-ADAPTER-14dda.htm

How about adding a carb to one side?

ataxian · Jun 4, 2015

Oregonglassblower said:
Sorry i couldn't help on this one but i don't rework existing pieces.

I'll order stuff you have in stock.

Santa Ana has glass blowers for making ash collector's out of existing pieces!

Oregonglassblower · Jun 4, 2015

NickDlow said:
How about adding a carb to one side?

No problem at all. Just PM me a sketch with where you wanted the carb placement.

NickDlow · Jun 4, 2015

ataxian said:
I'll order stuff you have in stock.

Santa Ana has glass blowers for making ash collector's out of existing pieces!

Watch out using that China glass tho bro. Very unreliable, so I've heard. Don't be surprised if it breaks.

ataxian · Jun 4, 2015

NickDlow said:
Watch out using that China glass tho bro. Very unreliable, so I've heard. Don't be surprised if it breaks.

I have so many pieces if they break so what!

I have USA glass as well!

China or USA they both break!

Mike ' s adapters are stronger than most!

NickDlow · Jun 4, 2015

ataxian said:
I have so many pieces if they break so what!

I have USA glass as well!

China or USA they both break!

Very true! Glass breaks!!

Enchantre · Jun 4, 2015

As I've gotten a couple of Mike's adapters before, I jumped all over the carbed adapter! Just ordered one.

MinnBobber · Jun 4, 2015

Mike,
got my order and lovin' the 8" glass mouthpiece, curved and flared, 18 mm Female.
Using it with my miniVAP and Ratchett's Song/ silicone adapter
Very surprised/pleased that it easily stands by itself between hits.
Very nice craftsmanship

Oregonglassblower · Jun 4, 2015

NickDlow said:
How about adding a carb to one side?

Yes, can do! Got the specs worked out and i will get then made this weekend.

MinnBobber said:
Mike,
got my order and lovin' the 8" glass mouthpiece, curved and flared, 18 mm Female.
Using it with my miniVAP and Ratchett's Song/ silicone adapter
Very surprised/pleased that it easily stands by itself between hits.
Very nice craftsmanship

Sweet! Glad the longer length and bigger flare worked out well for you.

nihil · Jun 4, 2015

If anyone is still on the fence about the carbed adapters, jump on down. I've been using mine since Tuesday and love it. It's also cool that I can flip it over and use it on one of my male pieces w/ another female GonG I'd been neglecting.

I'm going to play with double carbing with a JoDa GonG and this guy next.

FLelder ent · Jun 5, 2015

subway13029 said:
So are the carbed adapters able to be used with any setup?like I hook it on to my bubbler and then set desired vape on top and then just use carb instead of removing vape to clear?I like I like if it is..I have broken many of reducer by lifting my vape to clear and the reducer sticks and falls and boom..so I feel so behind the times..lol

Yes!!!!!!

Enchantre said:
As I've gotten a couple of Mike's adapters before, I jumped all over the carbed adapter! Just ordered one.

nihil said:
If anyone is still on the fence about the carbed adapters, jump on down. I've been using mine since Tuesday and love it. It's also cool that I can flip it over and use it on one of my male pieces w/ another female GonG I'd been neglecting.

I'm going to play with double carbing with a JoDa GonG and this guy next.

Just got mine today also, very nice!!!!

LetsAllMeltDownTogether · Jun 5, 2015

The angled 18mm to 18mm adapter I ordered is excellent quality. Exactly what I was looking for

Oregonglassblower · Jun 9, 2015

Just sent out this plug style carb adapter for a customer. This one is 18/14 with a 10mm carb but can be made in any size.

http://www.oregonglassblower.com/18-14mm-Glass-Adapter-With-10mm-Carb-18M-14F-18-14-10c.htm

421 · Jun 12, 2015

Just got my carb adapter and female flared MP. Great build quality! I love the carb adapter and how it has a large vapor window on it. It's also really cool when I take a hit with the carb, the vapor pools up in a disc on the side of the carb, kind of hard to explain... plan to take a video later. Female MP is smaller than I expected but I like the size a lot. It could probably sit on a stock HA MP quite well, as it is really light. I asked for 6.5" and OGB got it right on the money.

NickDlow · Jun 12, 2015

@Oregonglassblower thank you very much Mike! I just received my carbed drop downs and they're perfect! The quality is great and they're straight as an arrow. The carbs are 10mm and it clears like a dream! As far as carbed adapters these are the shit!!

Thanks again Mike, it was great doing business with you and I'm sure I'll be back for more accessories in the future.

Oregonglassblower · Jun 12, 2015

NickDlow said:
@Oregonglassblower thank you very much Mike! I just received my carbed drop downs and they're perfect! The quality is great and they're straight as an arrow. The carbs are 10mm and it clears like a dream! As far as carbed adapters these are the shit!!

Thanks again Mike, it was great doing business with you and I'm sure I'll be back for more accessories in the future.

Sweet!! So glad you are happy with them. Your rigs look awesome.

Oregonglassblower (mike) Custom Glass Adapters and Accessories

Caveat Emptor - "A Billion People Can Be Wrong!"

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

PALE BLUE DOT

Log Hog

Well-Known Member

Well-Known Member

Log Hog

PALE BLUE DOT

Well-Known Member

Log Hog

PALE BLUE DOT

Log Hog

Oil Painter

Well-Known Member

Well-Known Member

Member, Known Well

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Log Hog

Well-Known Member