• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Minicron, Minicron Lite and Ophos Oil Vaporizers

Vayperson

Well-Known Member
I just got the Centauri and Im blown away. This is a serious upgrade from my kiss cart. Im using with a minicron battery right now. Will all of the carts work with this battery? Just wondering with the double coil and donut. Thanks!
 
Vayperson,
  • Like
Reactions: mixchu69

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I just got the Centauri and Im blown away. This is a serious upgrade from my kiss cart. Im using with a minicron battery right now. Will all of the carts work with this battery? Just wondering with the double coil and donut. Thanks!

yes they all work.
 

mystikalghost

Well-Known Member
What's the best way to get rid of the black reclaim stuck under the coil after an ISO bath? I don't even want to load this thing again when it looks like this.
OKZiDUpl.jpg
 
mystikalghost,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Kiss Alpha Centauris are sold out. All orders placed today by 5pm will be going out after that its sold out with maybe 1 or 2 left.
 
THC SCIENTIFIC,

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
What's the best way to get rid of the black reclaim stuck under the coil after an ISO bath? I don't even want to load this thing again when it looks like this.
I know it being plastic probably makes most people wince, but I use one of these for most of my carts. The tip is pointy without being too sharp and firm but flexible enough for it to get anywhere in the carts and to bend before it breaks anything. I LOVE it for scooping wax out of carts, just need to be aware it's plastic so no hot coils. After an iso wash I use the back side around the pointy end and gently run it along the coils vertically along the wires to get that crap off. If it's still sticking around around I'll do it horizontally which moves the wires around a bit and if that's still not good enough I'll dig a little with the pointy end. Just need to make sure you don't dig into the wick. I actually do that sometimes to hold off doing an iso soak. I also use the pointy ends to scrape at any waxy areas still in the cup during the soak. I'm thinking about going from soaking to shaking them in a bag though. Anyways you get a bag of 30 for like $3, I keep a bag at home and in my car. One thing to watch out for is the plastic tip breaking off if you're too rough, don't want to leave it in there to vape.

butler-gum-eez-thru-flossers.jpeg


Edit: Also you can floss with it.
 

DrRishi

Well-Known Member
Kiss Alpha Centauris are sold out. All orders placed today by 5pm will be going out after that its sold out with maybe 1 or 2 left.
I ordered mine on May 16th (#22691) and now when I look at the order it says that the release date is 5th June. My order was placed before you sent out this message will it be sent out or do I have to wait?
 
DrRishi,

Vayperson

Well-Known Member
Is the O-phos battery any stronger than the minicron lite. I know they have different MAH but wondering about power.
 
Vayperson,
  • Like
Reactions: NorVape

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Is the O-phos battery any stronger than the minicron lite. I know they have different MAH but wondering about power.
Can't find the post, but @THC SCIENTIFIC has said they are all the same thing, just different sizes and shapes. I use an omicron lite and have a minicron lite backup and they both hit just as hard.
 
StormyPinkness,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Copy that. Thank you for the info!!

all of our evod series are same voltage, only 2 differences is the battery life between charges and the fact that bigger battery will be able to apply more power and heat up the cartridge a bit faster then the other smaller sizes.
 

Carl Hempel

Well-Known Member
I'm fairly new to Ecig / wax pen batteries, and threading etc. so excuse my newbie questions.

I recently received an Omicron lite and fitting Titanium Kiss cartridge - It's awesome.

I did order some additional cartridges but there was a mix up at the vendors end, and I received a couple of Ti Ophos cartridges by mistake...

So I'm wondering, is there a way I can use these cartridges with either the Omicron lite (an adaptor perhaps? as they are both 3.7v) or any other type of e-cig battery?

Or will I need an Ophos battery to put these Carts to use? Thanks in advance!

:hmm:
 
Carl Hempel,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Kiss_Alpha_Cenaturi__83868.1433283443.1280.1280.jpg





@Carl Hempel yes you can use the ophos carts on the omicron lite, all you would need are these adapters.

http://www.w9tech.com/adapters-ego-style/

Select the one that says 601 battery 601 cartridge and thats all you need. As for the troubles if you order these adapters i can throw in a free kiss cartridge as long as you can pm me right after your order and let me know your order number.
 
Last edited:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
i just wanted to post this here.

Ok so here it is,

Since we know you cant laser weld Ti Grade 1-4 to other metals since its pure, then this means that if you see a coil that has laser welds in them then it is not pure Titanium grades 1-4.

Many people claim to have grade 4 or grade 2 in their coils when they talk to me, but the only way you can tell is to take a look inside.

The image i provided shows that the coils can only be connected to the none resistance wires through a crimp.

So to see if you have true Titanium Grade 1, 2, 3, or 4 all you have to look at these points i circled in red.
DSC_0402_1.jpg


The next image shows you what laser welds look like. If you have this in your coils either under the ceramic cup or inside the ceramic cup then its not a true pure Titanium Grade coil. In fact it is Titanium Grade 5 which has aluminum inside, aluminum will allow it to be laser welded to the nickle non resistant wire.

gasuzune.jpg



Know what you have.
 

mystikalghost

Well-Known Member
Can't wait to grab 1 or 2 of those KISS gen 3 carts! Checking the site daily for them to come in to stock.
 
mystikalghost,

naturalsux

New Member
Patiently waiting for gen 3 ego thread kiss carts...

Me too.


Just ordered a minicron, and globe. Can't say enough good about w9 customer service. Above and beyond what I'm use to. Returned my calls in a few minutes, multiple times. And answered all my questions no matter how redundant they were. I think Sam was his name. What I really like he didn't try to sell me a persi or ophos like I wanted to buy.

I'm very pleased to say the least. Shipping is cheap too.
 
Top Bottom