My secret to THC E-Cig PG-Liquid... Potent, Effective, Cheap, Easy!!!

StheDubya

Active Member
Does anybody have a box with a delta 2? Or do all you guys use ego style 510s? Do any of you vape non wejuice? When one says subohm do you scratch your head? I too wanna know if this will work with a delta 2, subtank mini ? Drippers? What kinda watts has anybody tried? I'm thinking of bong rips instead of pinchys. Will it work? I wanna get a new toy
The delta 2 looks cool. Has some interesting features. I think the flow control would be nice with my e-cig liquid but probably unnecessary with my weed liquid. It is already thick enough to where you don't really need to restrict the flow. I have tried a bunch of stuff but the k1 just works for me. You can get some "bong rip" size hits with some stuff out there but it just seems so wasteful. One of the things I like about liquids is how long the product lasts compared to dabs or even just bud. I save a lot of money. I mix my liquid strong, take a deep lung draw and hold it for 10 seconds. Works for me. But I like to be more conservative most of the time.

So glad I found this thread. I am going to venture in making some ejuice today and wanted to list my steps and have a few questions.

  1. Freeze fresh flower (grinded), everclear, glass jars for 24 hrs.
  2. Wash flower in everclear for 2-3 minutes, strain, repeat for 2 additional washes.
  3. Freeze liquid for 24 hours, strain again to remove impurities.
  4. Pour liquid into pyrex dish and place on heating pad so that everclear evaporates. Before everclear completely evaporates, add 2-3 drops of water so the oil doesn't burn.
  5. Place EJmix in shot glass and place into a simmering pot to heat up. Add oil and mix for 5 minutes to it combines.
  6. Add to nautilus mini tank and vape away.
So onto my questions: Do I have to decarb the fresh flower? Is 2-3 minute wash with everclear too short/long? Is the second freeze of 24 hours too short/long?

Thank you all.

If your bud is good and dry I don't bother to decarb. I don't think it matters with liquids really. The coils definitely get hot enough to do the conversion. I put ground bud in a mason jar with warm everclear, shake the heck out of it, let it sit for about 10 min, shake it again and strain. Then 24hrs in the freeze. Then filter the waxes and junk. I water bath it to evaporate. The heating pad takes forever. Never had issues with burning and I definitely don't add water. You are wanting the water out and you will see little milky beads form when you get most of the alcohol gone. Those are from the water content of the everclear. And make sure to let it purge good as ethanol is bad for the lungs.

Really there's lots of methods but that is what I do. Im sure there are probably better ways but I like quick and easy.

Mod note: posts merged
 
Last edited by a moderator:
StheDubya,

Grim Chiclets

Well-Known Member
Would it be unwise to use something like this in my iStick ELeaf 30 Watt Battery and my Aspire SubOhm Atlantis? The stuff I have is propylene glycol infused with concentrate at 69%. It's called "Liquid Amber"
This is exactly what I want to do, and can't find any info on it.. but I'm fairly certain it would work fine if it works fine in the Nautilus. The lower resistance just gets it to heat faster and keeps it hotter to stand up to giant fast hits, so since the temp to vape nicotine is a bit higher than our oils/waxes, you could probably cut the temp a bit at first to test the waters so you don't make it splatter all over your lips/tongue :lol:
 
Grim Chiclets,

fogvalley

Dark vaper
I did it Sub ohm cause I couldn't find an answer. Yes..I bought a delta 2 with rba head to use as a dripper on segelei 30w mini. Won't use as much. My 1st run like 3 quick lung hits and it creeps.

I just finished my second run, my first 2 runs. Wash 1 got nice golden crumbly glittery stuff. The second I got some dark colored shatter. Is this normal results? Both I am happy with and work. Just curious if these will be my results on average?

Mod note: posts merged
 
Last edited by a moderator:

horst

horsed
Just stumbled upon this method of infusing dry herb into e juice:


any thoughts on this?
I wouldn't use a towel to press out the herb in the end, guess a fine ss-screen will work better. The overall process looks really easy and reasonable if you can't reach any concentrates in your region.
 

Grim Chiclets

Well-Known Member
Looks good, but I'm wondering how it stays in solution; perhaps we can infer that the ratio of pg/vg holds the key?
 
Grim Chiclets,
  • Like
Reactions: horst

horst

horsed
I rushed through the comments of the vid and found this question. The author of the video states that its just personal preference in consistency/taste. So to me it seems that it only depends on the low heat / long time exposure of the materials before pressing out.

But could VG/PG really extract a good amount of THC or is this just a waste compared to other extraction methods?
 

fogvalley

Dark vaper
My recipie is put herb and EC in freezer for 20-30 min. I just dump an 1/8 into a French press and put it in the freezer. Ever clear is always there. After the weed should be cold I soak for 3 min and French press into a pickle jar with a coffee filter, put the lid on it and into the freezer while still filtering. After 4+ hours I put a filter in my French press(I like the size of it) and re filter. Dump it out on a Pyrex pie plate and set it on the kitchen table under a celine fan overnight till dry. Scrape up some dirty meth looking stuff. Usually a gram or close on 1/8. If so I add about 2-3 ml of ej mix from amazon and .3 ml of 0. Nic 50/50. Flavor of choice. Stir in shot glass double boil 5+ minutes till I can't see any small chunks and a tiny bit longer. Works like a champ. I dilute it so have at least enough to fill a big ass tank, I will not make it 1:1 if it's going to give me 1/8" of liquid. About 3 big pulls and I'm good for a long bit. This works is the most idiot proof thing I have ever done in my life, if you want "wejuice" just struggle through the terribly written thing and you'll be happy.
 

BlueTeam#11

New Member
I rushed through the comments of the vid and found this question. The author of the video states that its just personal preference in consistency/taste. So to me it seems that it only depends on the low heat / long time exposure of the materials before pressing out.

But could VG/PG really extract a good amount of THC or is this just a waste compared to other extraction methods?

That video is where I started on my road to making liquid concentrates. The product I ended up with was vaporizable in aspire Nautilis tank and even tasted like the herb I used, however the potency just wasn't there. At all. If you are a casual user this may work for you but for daily users of cannabis, this method will not create a tincture potent enough to get you where you're wanting to go.

Mod note: posts merged
 
Last edited by a moderator:

arrr

Well-Known Member
I use ejmix. While it works in a carto atomizer (miniprotank) I find it tastes bad and the bigger the hit the worse it tastes. I dont use it much cause of the taste However I find if works much better in a dripper atomizer.
 
arrr,

fogvalley

Dark vaper
Have you tried mixing any flavors into it? I have used a few and some are better then others for sure
 
fogvalley,

Gazan114

New Member
Gazan114,

Joel W.

Deplorable Basement Dweller
Accessory Maker

10iifz5.png


Seems Legit!
 

fogvalley

Dark vaper
Honestly I dont taste it. And it works. Ej that is puff magic seems to work too, That stuff comes in a clear bottle with a home printed label. I'm not saying its a clone but in the world of vaping clones well you know are everywhere. Probably works but so does mine. I have had nothing but good experiences with ej mix. Still got half a bottle might switch when it's closer to gone. But I dought it. If it ain't broke don't fix it plus it doesn't even say what it is vg pg peg
 

BlueTeam#11

New Member
the results say it all lolll

the results say it all lolll


The poll has one voter and that voter is Gazan114. First time poster, makes two posts in two different threads about this product and links to a review that this member has made. Would you have any affiliation with this company @Gazan114 ?

I was thinking the same thing.
Dude, if you are starting your own business you have to create a marketing plan. You have the good fortune of not having more than 2 competitors (that I know of). Get some good pics, create a background for the product and tell us why we should use it. I am new here but if you have not noticed there are more than a few smart peeps in here to call bs should you be trying to take advantage. It's not just the cost of your product that a customer would be screwed on if your product doesn't do what it claims, the loss of concentrates would be devastating if a newb like myself invested in this product and made c-juice that was not 'effective'. That's a hundred dollar bill down the drain. I've done enough of that (losing money) learning how to extract concentrates and do not need any help losing more money and time in creating a tincture that is potent, cost effective, and vapable to the last drop without flavor loss, separation, or clogging of the atomizer.
 
BlueTeam#11,

Gazan114

New Member
The poll has one voter and that voter is Gazan114. First time poster, makes two posts in two different threads about this product and links to a review that this member has made. Would you have any affiliation with this company @Gazan114 ?

Unfortunately I am not affiliated. It's an honest poll if it was marketing than it would just hate only on ej mix. it's an honest opinion, who likes it who hates it. yes i did start the poll and also did vote for vapeur because i explained my reasoning.

Is that normal for people not to vote on what they like if they start the poll or thread?

BTW i posted to multiple sites, same name, same everything pretty much, not trying to hide anything, but tell people about it.

the results say it all lolll
this was a joke, i hope you all know. lolll

I was thinking the same thing.
Dude, if you are starting your own business you have to create a marketing plan. You have the good fortune of not having more than 2 competitors (that I know of). Get some good pics, create a background for the product and tell us why we should use it. I am new here but if you have not noticed there are more than a few smart peeps in here to call bs should you be trying to take advantage. It's not just the cost of your product that a customer would be screwed on if your product doesn't do what it claims, the loss of concentrates would be devastating if a newb like myself invested in this product and made c-juice that was not 'effective'. That's a hundred dollar bill down the drain. I've done enough of that (losing money) learning how to extract concentrates and do not need any help losing more money and time in creating a tincture that is potent, cost effective, and vapable to the last drop without flavor loss, separation, or clogging of the atomizer.


I completely agree, it takes a lot of time to finally get your concentrate to exactly what you want. I would know $$$$ lost and now barely reaping the benefits, it's hard. You know all i can say is one thing, try it out dude, you see my story and thats why i'm letting you know. I haven't had a problem with ordering through amazon or there website, returns are always a hassly they aren't easy ESPECIALLY when you are talking about a consumable product isn't really easy but usually people don't want bad feedback so they return it.

Mod note: posts merged
 
Last edited by a moderator:
Gazan114,

EliteNinjaRSO

New Member
To be completely clear; PEG-400 is a viable option still to the EJmix? I am asking because you have seemed to stop mentioning the PEG-400 the last few pages..
 
EliteNinjaRSO,

EliteNinjaRSO

New Member
Thank you very much. ;)

Can anyone post a good link for ejmix?

Mod note: posts merged
 
Last edited by a moderator:
EliteNinjaRSO,

420ms3

Member
hey guys.. new FC member here. just purchased some puff majic and was wondering what ratio you guys r going with. im a daily dabber and flower smoker.. i was thinking of going with 1g of honeycomb to 3ml of puff majic, do u think this is too weak of a ratio? is it better to mix stronger ratios and then dilute with ejuice of choice?

thanks in advance yall

oh and is it ok to use honeycomb bho in its current form or would i need to winterize it first?

buump.. lookin to make it asap

mod note: Three posts merged. Our rule is: No bumping. Please do not bump your threads to try and get attention. Be patient.
 
Last edited by a moderator:
420ms3,

fogvalley

Dark vaper
I don't think it matters. I use ej. I mix mine at 3:1 I never dabbed really before I started this but smoked heavy and I get way higher then off my haze which was better then cumbustion to me. You can mix it stronger and dilute to see how you want it. I use 3:1 so and 8th will fill a big subohm tank. A quarter usually twice. But it's nice at that number, I do think the rig you use could make a difference in how much you wanna dilute it, or how well it will wick, I find it doesn't wick the best. I'm gonna try puff magic next time to see which is best, may even try that other stuff but not till I get more input on it. This has become the only way I will ever smoke again. Just need a ball the size of a baseball and I'm set for retiernment.
 
Top Bottom