Open Source Glass Thread

NickDlow

Log Hog
Production demo video:


And the link to buy it for $65.91:
http://www.dhgate.com/product/mothership-straight-fab-2015-new-height-27/239957059.html

I F5'ed the link for about an hour and then it worked, placed an order for both the straight fab and the FC-186 to take advantage of the $15 coupon.

I gotta grab that, thank you.

Edit 1:

Torus with slits in the perc rather than the big holes. (Video just showing perc function, not actual piece)

Edit 2: Now that we have a straight fab and a torus can we combine them to make something like this?!?!?!?!?
 
Last edited:
Production demo video:


And the link to buy it for $65.91:
http://www.dhgate.com/product/mothership-straight-fab-2015-new-height-27/239957059.html

I F5'ed the link for about an hour and then it worked, placed an order for both the straight fab and the FC-186 to take advantage of the $15 coupon.


I was JUST about to post this link, thankfully I checked the thread. This piece looks very promising... I've also been looking to get the FC-186, please let me know how you like it when you receive it.

Now the real question is... Fab Egg or Fab Straight?
 
Smokey the Bearington,

deltr0n

Big Daddy Oil
I was JUST about to post this link, thankfully I checked the thread. This piece looks very promising... I've also been looking to get the FC-186, please let me know how you like it when you receive it.

Now the real question is... Fab Egg or Fab Straight?

Just ordered up a straight fab tube, can't wait to get my hands on it :)
 

Nugg

Well-Known Member
Arrived!!! :) :) Nearly perfect. Dewar is a little deep, but that is easily managed. Water tests fine. Very thick glass as reported. I got this for it's flexibility, and it looks like exactly what I wanted.

UFO, for those not following along. :)

Thanks @blankrider

Can you still use a low profile 18-14 reducer? Or is it too deep to seal properly?
 

Delta3DStudios

Well-Known Member
Accessory Maker
Hey all, I just noticed this thread

http://www.reddit.com/r/vaporents/comments/36hakw/sunshine_glass_your_perfect_glass_piece_contest/

Sunshine glass is hosting its first contest to try to reach out to the vaporizer enthused and other Ents in designing what they would think would be their perfect go-to glass piece and are asking people to submit ideas in the comment section and the person with the highest voted comment will win a 10,5 inch Glass bubbler with a inline diffuser, tree perc head and splash guard 14,5mm female and a reducer or any adopter we have on our store page you might need

We are trying to reach out to an ever growing market of health concern cannabis connoisseurs that have realized the benefits of using vaporizers over burning their herb and we want to expand our product line towards vaporizers attachments

any ideas for the contest are allowed but remember the more practical your idea is the more likely is that we would manufacture it but don't make that stiffen your creativity

Remember an image is the best way to get the idea across and everyone has Paint or at least pen and paper

Contest starts today or 19/5 and ends 25/5

Sunshine store and their employes wish everyone explosive creativity and big clouds !
 

cybrguy

Putin is a War Criminal
Can you still use a low profile 18-14 reducer? Or is it too deep to seal properly?
My low profile one is a little loose, but I am liking a splitter (cloudbuddyish) in there that lets me pull a plug to clear. The lowpro one won't work with the Lotus anyway due to the stir stick. It doesn't clear as easily as some pieces but I like it.
I'm sure I will try many configurations with this piece.
xQmvUeA.jpg

Obviously a repurposed whip... :)
 
Last edited:

S1N3

Tarzan @ KloudSociety
I gotta grab that, thank you.

Edit 1:

Torus with slits in the perc rather than the big holes. (Video just showing perc function, not actual piece)

Edit 2: Now that we have a straight fab and a torus can we combine them to make something like this?!?!?!?!?

unThPVD.jpg


I've shared that Torus plus. He mentioned any hi res photos would be helpful for him to mock-up a design. Happy to share if you can point me in the right direction.


Steven is hard at working perfecting the Torus and sent me an update on the re-works he's been doing. Credit where due, I'm happy he isn't calling a wrap with the current design... And is actively trying to perfect it for low restriction bowl/enail/nails/bangers.


Without further adieu, an evolution / progress image from Steven:

6wsRTuI.jpg
 

NickDlow

Log Hog
unThPVD.jpg


I've shared that Torus plus. He mentioned any hi res photos would be helpful for him to mock-up a design. Happy to share if you can point me in the right direction.


Steven is hard at working perfecting the Torus and sent me an update on the re-works he's been doing. Credit where due, I'm happy he isn't calling a wrap with the current design... And is actively trying to perfect it for low restriction bowl/enail/nails/bangers.


Without further adieu, an evolution / progress image from Steven:

6wsRTuI.jpg

I shared that video and this one

I haven't seen and good pics but I tried to explain which prob didn't help lol
 
NickDlow,

Sadus

New Member
Local headshop got a mothership order after waiting 6-7 months. Like 8 real pieces plus a bunch of mini's and bowls and such. Allegedly people flying in from out of town to camp out all night waiting for them. Fab egg $2800, Ball rig /Klein / Torus $2300, aaaaaaaaaa

Tried Steven's Torus with the giant holes for percs, it tornados great with a flower bowl or no attachment.. But with an e-nail the suction just isn't enough to get enough water up into the torus it seems like. Looking forward to trying the straight fab :D Also curious if the torus with slits would work better with an e-nail but probably not curious enough to order a 2nd one hah.
 

Frederick McGuire

Aggressively Loungey
Obviously the knockoffs aren't hurting the original artists business. Win win, it seems to me. I wouldn't be surprised if the knockoffs increased the interest in the originals...
The knockoffs have certainly made me more willing to drop the cash on a legit egg and pillar once I'm in a position to afford them :D
Before they seemed cool but just not worth it...
 

S1N3

Tarzan @ KloudSociety
Steven is having some woes with the straight fab leading to some breakages by his production crew. He mentioned after 5/22 having to add additional cost on the straight fab to recoup the losses. Tldr if you're on the fence, act know before the price increases $10.00

To Quote:
I write it to you only let you tell FC friends,I will add price from May 22th,about add 10$,I don't want let FC friends think it is hot sell and I add price,I must let them know reason and leave 2 days for they buy this piece,otherwise they think I am not honest.
 

NickDlow

Log Hog
Steven is having some woes with the straight fab leading to some breakages by his production crew. He mentioned after 5/22 having to add additional cost on the straight fab to recoup the losses. Tldr if you're on the fence, act know before the price increases $10.00

To Quote:
I write it to you only let you tell FC friends,I will add price from May 22th,about add 10$,I don't want let FC friends think it is hot sell and I add price,I must let them know reason and leave 2 days for they buy this piece,otherwise they think I am not honest.

Very cool of him!

Thanks for the heads up but mine is already preparing for shipment. I'm pretty excited :rockon:
 
NickDlow,

Frederick McGuire

Aggressively Loungey
Is Steven working on an egg too or what did ya get Frederick a CCW Egg?

I have purchased -
The kathy honeycomb egg.
The kathy "proper" egg - that came with a dodgey brace - eventually I got my order refunded and I repurchased it.
Ccg fab eg 12" - mine came with the pinhole version of the perc and I was very disappointed - ccg have said they'll send me a replacement with the slits perc so once I get that I'm pretty sure I'll be very happy with it.
Steven straight fab tube - haven't received it yet.

IIRC, Steven knocked up a prototype egg ages ago that had me drooling, but apparently his blowers can only knock out1 of them a day so it's not really worth it for him to produce...
I think I've seen fab eggs on Stevens store now but they could look similar to the other eggs available so I'm thinking he just bought a big lot from CCG or something?
 

NickDlow

Log Hog

Frederick McGuire

Aggressively Loungey
Honestly, just swap out that ~6 pin hole perc for either ~20+ pinholes or ~10+ slits, and I'd buy it :)
Water level is way too high in that vid - but if it was a bit lower I'd think it would perform nicely.

Looks kinda like a fusion of the ball rig and the straight fab...
I quite like it, just that perc looks like crapola - just like that Ccg egg...

I really like that having the downstem penetrate the piece and come back in the bottom, I've got a mini rig that has that design that I really like :)
 
Top Bottom