shredder
Well-Known Member
Thanks for that! I had no idea.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Thanks for that! I had no idea.
lmao i took it off, but i put it back on, hopefully that wont void anything
p1ssbucket
Well-Known Member
I don't think I'm just really high but I can't find the polarity for the mighty charger anywhere!
I have a car charger that fits and would work but I don't want it to fry.
I have a car charger that fits and would work but I don't want it to fry.
Vapetrees
Vaped Out
Off topic, I noticed you purchased some items for vapefiend and had them shipped to the US, did you incur importation taxes or anything like that?
p1ssbucket
Well-Known Member
Nothing after what I paid for the items themselves. So nothing after that. I'm in the USA.
If/when you ever hold a Crafty in your hand, you will see. The Mighty fits okay in my hand, but not even close to as discrete as the Crafty, and my girlfriend's hands are tiny so it looks monstrous in her hand, as do other things (giggity!)
This is so true and I still can't fathom it! If I step up the temps incrementally up to even max, i'm good. If I start off right at 195+ I need to use a water tool, but damn I love those massive thick milky hits! I love just been able to RIP through a .2g bowl on MAX temp in only a couple of hauls. If my lungs were just a bit bigger, I think I could snap it in one hit! Free flow air flow...... just the absolute tits!
A few weeks after ownership and I STILL feel the same! Have had to dial back the honeymoon period a bit and quell my usage, but looking forward to kicking it back up soon!
I LOVE MY MIGHTY.
tdriver
Well-Known Member
pin = +
Vapetrees
Vaped Out
adam_baumm
Well-Known Member
This is the glass piece from the balloon kit for Extreme Q with a 1inch piece of the whip to attach. I really like this one. The extreme Q balloon kit comes with this glass piece and a glass mouth piece a bit shorter.
Michel
Well-Known Member
Yeah it's broken on all my units, too. Be happy it's not the locking mechanism of the CU.
We had a discussion about this and s&b is aware of this "problem". Anyways, it's annoying...
GrkCdn
Member
As long as the pieces dont break off altogether ill be ok I suppose. Its just annoying especially for the price but the performance is key. I've also noticed now when I clean out the bowl as I do with the brush, as I twist the brush around in a circle within the bowl, the actual middle section will eventually move around.
mixchu69
Well-Known Member
Props to Churrucanan from the crafty post. Mighty with higher convection conduction ratio. Pairs with water tubes. Oring and solo gong with Fbomb. No leaking vapor.
These are for the people who hate plastic. I have no plastic taste regularly, but this makes it a mini glass on glass volcano.
Caution: should support the fbomb with your finger. Not 100% stable.
These are for the people who hate plastic. I have no plastic taste regularly, but this makes it a mini glass on glass volcano.
Caution: should support the fbomb with your finger. Not 100% stable.
Last edited:
Churrucaman
Well-Known Member
Just a silicone ring and an arizer solo stem or adapter, you can check it here: The Crafty by Storz & Bickel
Enjoy
Last edited:
ColoVaper
Science...Whoo!
I just wanted to jump in and say mine is also broken on both sides...hasn't even been a month.
GrkCdn
Member
Yeah same with me. And I'm OCD about this stuff. I'm convinced it simply broke on it's own after heating up several times. It seems to be a design flaw.
adam_baumm
Well-Known Member
Mine has two nice chunks that have broken off where the cu "docks" with the unit. Search my name , I posted pics. Hope if I. Send it in later they will fix it. I baby my unit.
I have used this everyday up to ten times a day since November.
I have used this everyday up to ten times a day since November.
I got a nice new chunky rear tyre for my puny little bike today so I decided to take off for a bit of a ride - & I ended up having a mighty fine time messing about by the river . . . . 
Btw, I've had this bad boy since November I believe - s/n in the early 1000s - STILL no cracks or broken fins, & the only thing wearing away on the rear sticker is the serial number itself.
BUT, there's no pass through & it severely struggles on low charge - so I pretty much always charge it at my earliest convenience once it's down to 3 bars to avoid any awkward situations.
I really must get around to claiming on the warranty . . . but she still gets a whole lotta love.
Praise the alMighty!
Peace fam.
Btw, I've had this bad boy since November I believe - s/n in the early 1000s - STILL no cracks or broken fins, & the only thing wearing away on the rear sticker is the serial number itself.
BUT, there's no pass through & it severely struggles on low charge - so I pretty much always charge it at my earliest convenience once it's down to 3 bars to avoid any awkward situations.
I really must get around to claiming on the warranty . . . but she still gets a whole lotta love.
Praise the alMighty!Peace fam.
Michel
Well-Known Member
I broke all my top fins on my first unit with pressure from carrying the device in a jacket and on the 2nd mighty from putting the CU on the heater when not "aligned" 100% to the body... The opened CU in a 90' degree angle can easily brake those fins by rocking it backwards and forwards just very slightly.
I have only one broken fin on my crafty so far when I tried to remove the sealing around the bowl first time
. To defend myself, I didn't expect breaking a S&B unit is even possible since I had the volcano in my hands first time.
Churrucaman
Well-Known Member
I have only one broken fin on my crafty so far when I tried to remove the sealing around the bowl first time
Severe deja vu here
adam_baumm
Well-Known Member
I have stated before that I feel a piece of aluminum or some harder grade Plastic at least on the very top "docking point" of the unit would add longevity to this beast of a vape. I really am happier to have this mighty then to not have got one. Hope they take care of us early adopters if we send them in for this issue.
Caelar900
Well-Known Member
Hey guys, I'm trying to decide between a Mighty or the Crafty and was hoping I could get some help. I vape at home for the most part but when I'm out I carry a backpack and often vape with friends. I'm leaning towards the mighty right now since portability isn't a huge deal since I usually have my backpack and the extra battery life would be good! But I was thinking I could grab the backup battery for the crafty and get relatively the same battery life and have the option to take the crafty out by itself if I don't have my backpack... Price between them isn't a big deal I just want whats best... What do you guys think? Help me pick I've read most of both threads and have been going back and forth for weeks! Thanks in advance!
I posted this on the crafty thread as well to try to get their opinion over there, hopefully thats ok with the mods.
I posted this on the crafty thread as well to try to get their opinion over there, hopefully thats ok with the mods.