Cheap High Quality Bubbler

cybrguy

cybrguy

Putin is a War Criminal
Master_Bator said:
all the chinese glass blowers don't smoke weed, and they only test the rigs with no attachments and they function good, so its only right to assume that when they are building them, they arent thinking of the added restriction that most nails and attachments add
Click to expand...
I think they really have no idea what they are making. They are following instructions. The MJ penalties are so ridiculously high in China that I suspect the percentage of users is very low, and these guys probably get additional scrutiny from the government. That being said, they COULD test with tobacco, nasty as that might be. Or some other less irritating herb.

On another note, my UFO is still in China a week later. Is there a holiday or something causing delay?
 
cybrguy,
  • Like
Reactions: Tweak
jambandphan03

jambandphan03

in flavor country
ya'll are killing me with this 186 talk I have been wanting that one, but have been spending all my extra scratch on glass bloswing supplies... once I get the money in my paypal I'm getting that one for sure. I just hope they keep making them good, hate to miss this round since everyone seems to be getting good ones right now.
 
ataxian

ataxian

PALE BLUE DOT
jambandphan03 said:
ya'll are killing me with this 186 talk I have been wanting that one, but have been spending all my extra scratch on glass bloswing supplies... once I get the money in my paypal I'm getting that one for sure. I just hope they keep making them good, hate to miss this round since everyone seems to be getting good ones right now.
Click to expand...
This is my best piece for my situation FC 186!
The D020 & D022 I love as well.
However the FC186 is the best!
I have a FC 187 however the perc is lower or perfect on the FC 186!
 
EverythingsHazy

EverythingsHazy

Well-Known Member
The stereo matrix perc fires well with the water level not completely covering the perc, because when you start to hit it, the water level rises up a bit. Try it with just enough water to completely cover the perc, AFTER it rises, before it starts bubbling. You can add more water, for a more cooled/filtered hit, but for max flavor, you don't have to cover the whole top perc.

Not sure if this is the case with the fc-186, but with the gb-186, it is. Especially if you are mixing in Cranberry Extract. The bubbles will hit the top of the can with the water level specified above. ANything else, and a hard clear can cause a drink.

What I'm curious about, is how the fc-186 compares to the gb-186. If anyone has both, how do they differ, if at all (aside from the neck/mouthpiece).

cybrguy said:
That is a lot of NACE. I don't remember how big the FC-186 is, but I only use 4 or 5 drops of BCCE in my pieces.
Click to expand...
I agree. The effects of keeping the glass clean and shiny occur at 3-4 drops with most pieces, but in a piece that holds more water, like a big recycler or something, more might be needed for the same results.
 
EverythingsHazy

EverythingsHazy

Well-Known Member
weenstoned said:
I have the gb-186 not the fc-186 but I can definitely fill to the top of the perc and not get water in my mouth. However, I find the flavour is better if you fill to halfway up the top matrix perc.
Click to expand...
Oh, you definitely CAN fill it up to the top of the perc, and be fine. You just can't fill it too high, and clear it really hard for a few seconds, with no restriction. With CE added, even halfway up the perk can get your lips wet, if you pull hard enough for a few seconds. The bubbles just stack and climb the smooth glass insanely well. There's no need to clear the piece so hard anyway, so it isn't a problem. I was just mentioning it because some pieces you can clear full force and no water will get into your mouth. I agree that the main benefit of less water is the flavor, though.
 
mrgohamilton

mrgohamilton

Well-Known Member
S1N3 said:

Tried the torus out with my least restrictive flower vape, :science:





Qvf2lNy.gif
Click to expand...

How hard are you pulling?

anyone figured out the WOL torus water level? having it to the funnel is nearly impossible unless you want a drink. having it almost to the funnel works but you can barely pull it.
 
mrgohamilton,
  • Like
Reactions: ataxian
ataxian

ataxian

PALE BLUE DOT
EverythingsHazy said:
Oh, you definitely CAN fill it up to the top of the perc, and be fine. You just can't fill it too high, and clear it really hard for a few seconds, with no restriction. With CE added, even halfway up the perk can get your lips wet, if you pull hard enough for a few seconds. The bubbles just stack and climb the smooth glass insanely well. There's no need to clear the piece so hard anyway, so it isn't a problem. I was just mentioning it because some pieces you can clear full force and no water will get into your mouth. I agree that the main benefit of less water is the flavor, though.
Click to expand...
You seem to be an expert!
I didn't have my first joint until 1970.
 
J

Joel W.

Deplorable Basement Dweller
Accessory Maker
So is Cranberry extract any different from Rezblock? Can you still recover your reclaim with it or do you toss it out with the water?
 
Joel W.,
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Joel W. said:
So is Cranberry extract any different from Rezblock? Can you still recover your reclaim with it or do you toss it out with the water?
Click to expand...

Essentially, no (I believe lab tests showed NACE had a bit more cranberry extract than Rezblock). Theoretically, I think you'd need 1 or 2 less drops of CE than Rezblock to get the same results.

I never reclaim anything from my water (too many minerals and impurities). I always catch my reclaim before it hits the water. (I use a cotton ball for my desktop vapes, this catches ABV debris and absorbs some reclaim. makes for an awesome late night vape session)
 
Last edited by a moderator:
hd_rider

hd_rider

Well-Known Member
Ratchett said:
I always catch my reclaim before it hits the water. (I use a cotton ball for my desktop vapes, this catches ABV debris and absorbs some reclaim. makes for an awesome late night vape session)
Click to expand...

That's interesting, @Ratchett. So are you saying that you keep a wad of cotton in your stems that act as a filter? And then at some point after one or more vaping sessions, you remove the cotton and vape that?
 
063_XOBX

063_XOBX

Ganjapreneur
Cmengglass Cheap Fab Egg arrived yesterday and has been put through it's paces.

Like @GSH mine is excellent quality, perc fires evenly etc. I have only 1 bubble (on the very bottom of the egg) and a perc that curves slightly to the right but otherwise it's flawless and really impressed the people I used it with. The draw is much smoother than my more expensive D-Cycler K/O that's also been popular.
 
C

ChiefKeefe

Well-Known Member
Too busy and medicated to read all the posts above but I saw something about water level. Ive owned the real piece, the 65t and actually the 60t, along with the bubbler version that the fc-187 is modeled after. They are all great and function slighlty better then the china versions, and obviously more aesthetically pleasing however the 186 and 187 are very well made and very thick.

That being said for water level..

The 187 should be fully covered, more restrictive stuff fill it right above the perc just covering, less restrictive can go about 1/4 to a 1/2 inch above the perc due to less drag from the attachment.

For the 186 I always fill it to the half way line of the second perc. This is HOW the american version was intended to be filled. When you pull it the water from the 90 degree joint pulls into the perc aswell. The bottom perc is designed to push water upwards, while the top perc filters it. The american version (60t mobius) and the 186, hit very SIMILAR. And I will admit I tried combusting out of my 186, and I would say it is just about as smooth as the 60t, which is one of the smoothest single perc flower tubes you can get in my opinion ( and i have ownd lotssss of american scientifc glass including SG, mobius, dirty rico, regredably toro, and a few others)


Edit: it is possible to drown a perc out, thats whats will happen if you cover both matrics. To each there own.
 
Last edited:
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
hd_rider said:
That's interesting, @Ratchett. So are you saying that you keep a wad of cotton in your stems that act as a filter? And then at some point after one or more vaping sessions, you remove the cotton and vape that?
Click to expand...

Yep, all the time. The *only* thing about vaping this reclaim soaked cotton is the taste. It's pretty bad. I typically add more diffusion by adding an Ash-catcher to my rig. Though I really can't wait to get a picture of my new UFO-Frankenstein max-diffusion rig (CCG AC + FC UFO + PNWT). It's overkill for flowers, but perfect for reclaim
 
mixchu69

mixchu69

Well-Known Member
Hey Blankrider,

Are there any special products or pieces that we should patiently look for in the near feature? I love the UFO. It seems like the torus is center of attention right now.
 
You must log in or register to reply here.
Top Bottom