1_gr8_underdog

Trapped in the Astral Planes Back from the dead
Yes, I would. The nano has much better flavor as well as water adaptabilty over the arizer. Also it has a Much smaller footprint. The only reason I would recommend this over the vapolution 2.0 (beside it being beautiful wood) is the draw stem. They are both great vapes, but I personally find unloading and loading of the draw stem easier with the nano. Last but not least, you get a lifetime warranty with the nano by using the code then registering on the Epic web site.
 

Uzer

Well-Known Member
Would you suggest the E-Nano over the Arizer V and Vapolution 2.0? Thanks

If herb conservation is a top priority then the E-Nano is an excellent choice, if your disciplined you can load tiny amounts into a GonG and pull a couple big clouds out of it. Ofcourse, you can drop the screen and load more or just load more bowls. I guess what I'm trying to say is how much herb you use really depends on you, but the smaller chamber size of the nano glass helps alot.

At the end of the day we just need a device that creates heat that we can transfer to our herb. I like the simplicity of the way the E-nano preforms this task.
 

Traaaaan

Well-Known Member
This is not correct, I use my UD and HI (ong's) that fit on the outer stem of those vapes with my Nano's just fine. While they may not lock on and/or bring as big of clouds as the EV gongs, they most certainly don't have to be snug. Just hover over, it's certainly not as painstaking a task as some may think or make it appear so, just my two cents. :peace:
I do a lot of multi tasking whenever I vape... Like playing xbox haha. I tried using my solo gong the other night with a small, unground chunk of herb. In my haste I accidentally inserted the heater too far while taking a quick hit between rounds in destiny. Didn't notice it until a minute later when I saw the vapor trail rising up from the stem.
 
Last edited:

jm1878

Active Member
Yes, I would. The nano has much better flavor as well as water adaptabilty over the arizer. Also it has a Much smaller footprint. The only reason I would recommend this over the vapolution 2.0 (beside it being beautiful wood) is the draw stem. They are both great vapes, but I personally find unloading and loading of the draw stem easier with the nano. Last but not least, you get a lifetime warranty with the nano by using the code then registering on the Epic web site.

I see! Well then, I will just have to purchase one so. It doesn't look like a spaceship either which is always a plus but it's the efficiency that i like most. Sound for the help man :peace:
 

jm1878

Active Member
If herb conservation is a top priority then the E-Nano is an excellent choice, if your disciplined you can load tiny amounts into a GonG and pull a couple big clouds out of it. Ofcourse, you can drop the screen and load more or just load more bowls. I guess what I'm trying to say is how much herb you use really depends on you, but the smaller chamber size of the nano glass helps alot.

At the end of the day we just need a device that creates heat that we can transfer to our herb. I like the simplicity of the way the E-nano preforms this task.

Yeah, it does seem simple to use from the reviews on youtube. The issue of conservation being a priority usually ties my hands when searching for a vape (€50 for 2.5grams) but i assume it couldn't be as bad as combustion either way? Thanks man
 

Uzer

Well-Known Member
Yeah, it does seem simple to use from the reviews on youtube. The issue of conservation being a priority usually ties my hands when searching for a vape (€50 for 2.5grams) but i assume it couldn't be as bad as combustion either way? Thanks man

I didn't mean to say it is simple to use I meant to say it is a simple device. That means it doesn't do much for you so there's is a bit of a learning curve to get it preforming at its best. But once you figure it out, which shouldn't take long, it excels.
 

BoogerMan

Well-Known Member
Homage to the OG G'ma Dabs!!!

bowling-boil-toro-gif.gif

:rockon::science::rockon::science::rockon::science::rockon::science::rockon::science::rockon::science::rockon::science::rockon::science:
That's the sweetest dome I think I've ever seen :D
 

Cereal_MF

Green goes to brown, n that's what I stand for.
One of the most beautiful things about the E-nano, is that it's application is exactly like that of the grav bong, for those of you familiar. Instead of wasting half a gram on rolling a j or l which would last you only part of the day, you can grind up the same ammount and stay late up into the night packing dem microbowls!
my screen is currently about an inch in, im gonna push it a bit closer, about 2/3", and see what kinda nice hits i can get on a 7.3 with a hot log. only expecting 1 really nice hit and 1 or 2 more finisher hits.

Hey @Pjake do you play HOTS?
 
Last edited:

Pjake

It's all in the reflexes.
One of the most beautiful things about the E-nano, is that it's application is exactly like that of the grav bong, for those of you familiar. Instead of wasting half a gram on rolling a j or l which would last you only part of the day, you can grind up the same ammount and stay late up into the night packing dem microbowls!
my screen is currently about an inch in, im gonna push it a bit closer, about 2/3", and see what kinda nice hits i can get on a 7.3 with a hot log. only expecting 1 really nice hit and 1 or 2 more finisher hits.

Hey @Pjake do you play HOTS?
Yes I do play HotS. Not awesome at it. Was a top 1000 WD on Diablo. Pjake#1335. And your comparison of the Nano to a GB is spot on. Always loved the GB for its conservation. Long live the Nano!!
 
Last edited:

CarolKing

Singer of songs and a vapor connoisseur

I saw this cool picture online. I really like the stem. Is that from Joda glass?
Got some Jack the Ripper in the Nano right now, just enjoying a little down time.
Should I or shouldn't I work out in the yard today?
 

flotntoke

thoroughly vaped

I saw this cool picture online. I really like the stem. Is that from Joda glass?
Got some Jack the Ripper in the Nano right now, just enjoying a little down time.
Should I or shouldn't I work out in the yard today?


Yes... that's one of mine. Very early Joda stem and still my favorite for dry! It's the same nano pic I photoshop into damned near everything on here.

Where did you see the pic? I only posted it a couple places here on FC (this thread and picture thread IIRC).

Another personal fave of mine featuring same nano pic for those who remember Mork from Ork.....

Nano! Nano!

yHx8gP9.jpg
 
Last edited:

SSVUN~YAH

You Must Unlearn, What You Have Learned...
What's up Nano Nation? Just stopped in to tell you guys the nation grew larger this weekend. I gifted my Walnut Nano to a buddy who's previous vape, a Palm 2, crapped out on him. It was a bit dinged up and the click on the meter was wearing out, so I told him to keep it on at all times or just unplug without clicking it off. Gave him an FC187 too, like the Nano it had issues too but still very capable. He was thrilled, I threw him an 18mm gong, direct draw stem and some screens so he is ready to rock out! Hope everybody is rockin their Nano's proudly, cheers!
 

ChippyMalone

Be here now.
Accessory Maker
@SSVUN~YAH you are an awesome friend.

I've got the Walnut with a new custom Joda Glassworks GonG on my new dhgate bong that I don't even know the name of. I bought it because it looked interesting and is now my favorite. Tire percent in the bottom, honeycomb above.

Swapping back and forth between flowers and hash
 
Last edited:

SSVUN~YAH

You Must Unlearn, What You Have Learned...
@SSVUN~YAH you are an awesome friend.

I've got the Walnut with a new custom Joda Glassworks GonG on my new dhgate bong that I don't even know the name of. I bought it because it looked interesting and is now my favorite. Tire percent in the bottom, honeycomb above.

Swapping neck and forth between flowers and hash
Thank you Chippy! Well he did get me a pretty decent job that I'm about to start, so that felt like a great way of thanking him!
 

CarolKing

Singer of songs and a vapor connoisseur
Yes... that's one of mine. Very early Joda stem and still my favorite for dry! It's the same nano pic I photoshop into damned near everything on here.

Where did you see the pic? I only posted it a couple places here on FC (this thread and picture thread IIRC).

Another personal fave of mine featuring same nano pic for those who remember Mork from Ork.....

Nano! Nano!

yHx8gP9.jpg
I just searched enano pictures and images and a group of pictures popped up and that pic above was one of them. Love the JoDa stem, eventually I want one of those. I like the Mork pic too.
@SSVUN~YAH Good luck with the new job.
 
Last edited:

WoodyWeedPecker

Well-Known Member
I received my E-nano a few days ago. Beautiful little thing. Walnut is a very nice wood. Love to look at the lines, color contrasts and intricate patterns into the wood. Each nanos have their own unique patterns like fingerprints, so this one is my little baby.

I'm still trying to experiment with it and help is always welcome. I'm trying to use my e-nano in a similar way as I'm using my MFLB+PA. That is small quantities of herb (below 0.05g) and long sessions. In that sense, I'm not cloud chasing at all. Of course, I like to see a little amount of vapor. I like to be able to take a little toke here and there while doing something else which is a technique I came to perfect with the MFLB+PA. Maintaining me at a [4-7] unless I go for a larger load in between.

I'm still at the stage of trying many different things and I had my nano only for a few days. At the moment, I sandwich my very small loads between the 2 screens. The top screen on the heater side has its side trimmed down to allow for smaller load; and the "basket side" is reversed with the flat side facing the heater to allow placing the screen very close to the heater output. EDIT:I also use a larger grind than with the MFLB which is ground into powder form.

With that set-up, I start at 6, then I move it up to 7, 8.0 and finish at 8/8.5/9.7. From time to time, I mix the load by pushing my sandwiched screens in a bowl or cup, then repacking the stem (by sipping on the stem).

At the moment, I still feel a bit more comfortable with the MFLB for very small quantities and long sessions (even lower than 0.05) but my e-nano technique is getting better and better for that particular situation. I'll keep using my nano for that purpose in the next following days. The first few times were difficult as I would finish my small load much too quickly for my taste (but the high was good), that's why I decided to start using sandwiched screens instead. Maybe it's possible to do it without the second screen, I didn't make enough experiments yet. My technique is improving.

I've also tried a couples of 0.1g and a 0.2g loads and it was terrific. Nice clouds of vapors, a bit smoother than my MFLB. Very good high. At the end, my abv were light brown, an almost even color, but I then vaped them to dark brown at 8/9. I love how the nano is pure convection.
 
Last edited:

flotntoke

thoroughly vaped
What's up Nano Nation? Just stopped in to tell you guys the nation grew larger this weekend. I gifted my Walnut Nano to a buddy who's previous vape, a Palm 2, crapped out on him. It was a bit dinged up and the click on the meter was wearing out, so I told him to keep it on at all times or just unplug without clicking it off. Gave him an FC187 too, like the Nano it had issues too but still very capable. He was thrilled, I threw him an 18mm gong, direct draw stem and some screens so he is ready to rock out! Hope everybody is rockin their Nano's proudly, cheers!

Congrats on the new job!! That's quite a finders fee. So kind of you @SSVUN~YAH . The best simple combo out there IMO. nano on a 187!
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Thank you for all the pics!

On a side note we just got a new batch of E-Nano Stando's in for everyone that has been emailing me. Best part is they are on sale for the week!

Thanks again!
Nadia
Sweet!
wtg @SSVUN~YAH..New beginnings for both I wish You both well
Thank you very much @Reflections

Congrats on the new job!! That's quite a finders fee. So kind of you @SSVUN~YAH . The best simple combo out there IMO. nano on a 187!
Thanks man! Looking forward to it! & I must say I agree on the combo!!!
 
Top Bottom