• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Source Orb Pen Vape

Tickdickler

Well-Known Member
Got an email from their distributor in Michigan saying my order shipped. Got it coming usps priority so its here in time for this festival im going to. Can't wait.
 

Tickdickler

Well-Known Member
Mine came as well yesterday. I'm using a kanger evod vv, my dual coils don't light up super bright but it works. The terra wouldn't fire at all on my battery. I probably have to invest into a new battery. Besides that I'm still pretty pleased. Even though I feel like i'm not giving enough power to the dual coils, it hits better than my 3.7 kiss.
 
Tickdickler,
  • Like
Reactions: poonman

MuushuPork

Well-Known Member
Mine came as well yesterday. I'm using a kanger evod vv, my dual coils don't light up super bright but it works. The terra wouldn't fire at all on my battery. I probably have to invest into a new battery. Besides that I'm still pretty pleased. Even though I feel like i'm not giving enough power to the dual coils, it hits better than my 3.7 kiss.

After using the dual coil and terra for s bit, im liking the terra most. Its much closer to the e-nano in terms of flavor and temp of vapor. The dual coils get way to hot for my liking. In a pinch the dual will get the job done but it tastes like im combusting my shatter. It gets you ripped fast though as others have said but the flavor is nasty compared to the terra.
 

poonman

Well-Known Member
@MuushuPork and @Tickdickler
I'm glad to hear more reviews of the Orb .
It is still my dd for portable dab hits .

There are lots of other " dabbler/KISS/coil " atty pen vapes .
But I find this one the easiest to clean/maintain .
As mentioned before , iso soak clean all the parts ,
to make it look brand new again .

I still ' mostly ' use and will be ordering the single wickless
coils attys . ( easier to keep one coil saturated than 2 )
where I don't get that burnt out taste as often .
I will be getting the terras soon ....

@SOURCEvapes 2nd attempt ,
You should hold a contest on FC to win a free Orb .
Get your BRAND out there for people to see .
This is too good of a Secret and should be Revealed . :tup:
 

Tickdickler

Well-Known Member
Really wanted to try the terra so I went out and got an MVP 20 watt. The terra still does not fire. It makes the green light on my mvp sustain when I try to fire it. I sent a message to source on their site.
 
Tickdickler,

710

Well-Known Member
Really wanted to try the terra so I went out and got an MVP 20 watt. The terra still does not fire. It makes the green light on my mvp sustain when I try to fire it. I sent a message to source on their site.

Seems like overkill. You probably popped the coil.
 
710,

Tickdickler

Well-Known Member
Seems like overkill. You probably popped the coil.


I first tried using it on my kanger evod which goes from 3.3-4.8 volt. It didn't work at all on there, the battery light would just blink 3 times when trying to fire it. On the MVP the light sustains green for 5 seconds when I try to fire. I don't think its been blown out, might have to do with the threads or pin contact. My terra has never once heated up on either battery.


EDIT: Its not blown, I tried screwing it in more loose and now it works. I am loving the terra. Great flavor, The vape is much smoother.
 
Last edited:
Tickdickler,
  • Like
Reactions: poonman

BRAND1SH

I save trees
Received my warranty pack of atomizers a few days ago. The Terra, doesn't work at all. Never gets hot (using the source big rig battery), the dual coil a) looks used (the ceramic was already brownish) and b) it didn't screw on all the way, it just keeps spinning. The only one that did work was the single coil wickless however that one had half of the ceramic cup snapped off. Sigh...

Great service
Great core product
Not so great QC
 
BRAND1SH,

MuushuPork

Well-Known Member
Received my warranty pack of atomizers a few days ago. The Terra, doesn't work at all. Never gets hot (using the source big rig battery), the dual coil a) looks used (the ceramic was already brownish) and b) it didn't screw on all the way, it just keeps spinning. The only one that did work was the single coil wickless however that one had half of the ceramic cup snapped off. Sigh...

Great service
Great core product
Not so great QC

Soory to hear about all the terra issues. I only got one and luckily its still working. Im hoping to get a 5 pack of terras but would like to hear how they handle replacements.
 
MuushuPork,

Tickdickler

Well-Known Member
Received my warranty pack of atomizers a few days ago. The Terra, doesn't work at all. Never gets hot (using the source big rig battery), the dual coil a) looks used (the ceramic was already brownish) and b) it didn't screw on all the way, it just keeps spinning. The only one that did work was the single coil wickless however that one had half of the ceramic cup snapped off. Sigh...

Great service
Great core product
Not so great QC

I had the same issue with the terra but I got it working. It didn't want to work if it was screwed in too tight. I messed around with how far it was screwed in until it fired and now it works fine.
 
Tickdickler,
  • Like
Reactions: poonman

rekrab

Well-Known Member
just got an orb from planet vape 3 wickless dual coils and they all work. also got the terra but my 30w bat is working that i would used for my divine tribe donut and my ego twist cant get it glowing. I was wondering though from others experience what there terra atty looks like. mine came with the donut at a bit of an angle in the chamber and it appears to have some black on it. almost dirty looking. thats why i want to get it glowing to make sure its clean.

thanks for suggestions
 
rekrab,
  • Like
Reactions: poonman

Tickdickler

Well-Known Member
just got an orb from planet vape 3 wickless dual coils and they all work. also got the terra but my 30w bat is working that i would used for my divine tribe donut and my ego twist cant get it glowing. I was wondering though from others experience what there terra atty looks like. mine came with the donut at a bit of an angle in the chamber and it appears to have some black on it. almost dirty looking. thats why i want to get it glowing to make sure its clean.

thanks for suggestions

My terra has the angled position inside you spoke of but I had no dark spot. Is you terra heating up at all? I can get mine slightly red at 4.4v.

Also I contacted source and they are sending me a replacement terra cause the threads have an issue.
 
Tickdickler,
  • Like
Reactions: poonman
Mixed feelings here as well, i also had a terra with the donut raised a bit.
Customerservice was great in that they sent me a replacement at no costs(i am in Europe btw:tup:) right away, letting me keep the old one(pushed it down and it did even work as well).
The performance of the terra attys i did find unsatisfactorily however, but then i am a fan of clouds.;)
The battery that came with the premium kit i do not get so much, it sadly lacks power and because it's lighter then average with the heavy Orb top that makes it very unevenly balanced.
Trying to stand it upright like that will lead to a lot of toppling, the big rig is much better in both performance and usability.
I do really like the solidness and durability of the orb, only drawback there is just to be careful when using it whilst moving, bumping this on your teeth will be felt.;)
The double coil attys(wicked and bare) i got with the set were very good and i orderered a set of 5 wicked(by mistake,i realised only after, i actually wanted the wickless) double coil for continued usage of this pen.
These however had the coils located much nearer the top instead of at the bottom with some of the wicking coming loose and with also having the beforementioned loosness when screwing them in(doesn't have to mean these don't work, but does require some care), the quality was lacking IMO in those a bit as well.:(
So i am hoping for some feedback here before ordering more double coiled attys.
If i order me 5 double coil wickless will i get ones with the coils at the bottom or near the top?
Thanks in advance for answering!:)
 
Last edited:

MuushuPork

Well-Known Member
So after getting a few gift cards from them for reviews and 4/20 i decoded to order a pack of terras. Ill let everyone know how it goes. Any reason to worry that i got a shipping notice from themedstick.com??
 

Tickdickler

Well-Known Member
Mixed feelings here as well, i also had a terra with the donut raised a bit.
Customerservice was great in that they sent me a replacement at no costs(i am in Europe btw:tup:) right away, letting me keep the old one(pushed it down and it did even work as well).
The performance of the terra attys i did find unsatisfactorily however, but then i am a fan of clouds.;)
The battery that came with the premium kit i do not get so much, it sadly lacks power and because it's lighter then average with the heavy Orb top that makes it very unevenly balanced.
Trying to stand it upright like that will lead to a lot of toppling, the big rig is much better in both performance and usability.
I do really like the solidness and durability of the orb, only drawback there is just to be careful when using it whilst moving, bumping this on your teeth will be felt.;)
The double coil attys(wicked and bare) i got with the set were very good and i orderered a set of 5 wicked(by mistake,i realised only after, i actually wanted the wickless) double coil for continued usage of this pen.
These however had the coils located much nearer the top instead of at the bottom with some of the wicking coming loose and with also having the beforementioned loosness when screwing them in(doesn't have to mean these don't work, but does require some care), the quality was lacking IMO in those a bit as well.:(
So i am hoping for some feedback here before ordering more double coiled attys.
If i order me 5 double coil wickless will i get ones with the coils at the bottom or near the top?
Thanks in advance for answering!:)

My wickless dual coils are pretty close to the bottom, reclaim doesn't build up too fast down there. Those dual coils plow through material quickly.





So after getting a few gift cards from them for reviews and 4/20 i decoded to order a pack of terras. Ill let everyone know how it goes. Any reason to worry that i got a shipping notice from themedstick.com??

I got that medstick shipping notification too. Then I was notified saying it shipped from dc8 distribution or from Michigan. DC8 just told me my replacement terra is on its way, though in the email it says source orb + terra.
 
Last edited:
Tickdickler,
  • Like
Reactions: poonman

710

Well-Known Member
Too many faulty models it looks like. Was going to order a Terra but nah.
 
710,

MuushuPork

Well-Known Member
I feel bad now. All 5 of my terras seem to work. Im not dabbing off each one but they are getting hot. You have to burn them dry because i can smell something when i heat them up at first. But yeah for now all good. Although i wont know for sure for awhile.
 

rekrab

Well-Known Member
anyone have any luck rebuilding an orb coil or possibly know a way of explaining to me how i would go about making my dual coil into a single coil.

thanks for any help
 
rekrab,

ictus

Well-Known Member
On the last page somebody asked about holes in the bottom of these atomizers but I did not see anybody reply.

With such a large hole in the middle center of these, how is the reclaim spilling not a huge issue? Can anybody comment on this?
 
ictus,

MuushuPork

Well-Known Member
On the last page somebody asked about holes in the bottom of these atomizers but I did not see anybody reply.

With such a large hole in the middle center of these, how is the reclaim spilling not a huge issue? Can anybody comment on this?
I have 6 and none have holes as described.
 

Kelvin-nbk

New Member
anyone have any luck rebuilding an orb coil or possibly know a way of explaining to me how i would go about making my dual coil into a single coil.

thanks for any help

Been lurking for a good while and thought I'd join to help out with this.
It's amazingly easy to do, pull the metal pin out of the bottom of the atty, then the rubber bung, poke the ceramic cup through the hole so it pops out of its case, unwrap the mesh, then poke one of the wires in the bottom and see which rod you wiggle, hook the wire inside the cup and then unwrap the one that goes up the side of the cup, reverse all of these steps (minus the part removing the ceramic rod) and you now have a single coil.
Hope this helps
 

Kelvin-nbk

New Member
No problem, worst comes to worst get some new wire and re wrap it; they're super simple.
I only figured it out because my double coil shorted out one me straight away (now it's a hanging coil, because by the time I realised I could sort it i had already ditched both rods)
 
Kelvin-nbk,
Top Bottom