• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Pax 2

Status
Not open for further replies.

whatavape

Engineering the stars since '01
. At what level do you start to get 5+ ovens?

I start on 1 petal, get 4-5 hits, move to 2 petals, get 10-15 hits. Stir, get 4-5 hits while still on 2 petals, move to 3 petals, get 6-10 hits, move to 4 petals for 2-3 hits.

Total I get about 25+ pulls on the oven. For me they're about 5-6secs. As I've mentioned before, I use .25-.3g's medium fine grind, not powder. It all depends on quality of materials, but lately I've been getting 30+ pulls on one oven.
 

Mr. Me2

Well-Known Member
Maybe instead of making it a solid piece of metal (which is how it is and makes it stay hotter for longer), they can fabricate it to look like the old pax screen which has tiny holes in it and is thin enough to not get too hot but is just there to hold the cannabis down. All while retaining the ability to adjust it to the amount of cannabis you have, maybe with like a spring that gets pushed down when you put the oven lid on. HIGHDEA.
I was thinking something similar. But I like their form: maybe if they just drilled multiple small holes through it,it would eliminate any increased resistance
 
Mr. Me2,

wheresjerry

got mule?
Hey, p2 owner and very pleased with new model. P1 was ok, but changes made to p2 are exactly what makes this my favorite vape now. I also use an iolite vape that runs on butane. I like that one for festival time!
 

Concert Amp

Active Member
A couple people have mentioned taking the puck of material out once it is nearly spent and flipping it around.

How are you doing that? With tweezers? Or are you just tapping it out as a block?

I wonder what kind of approach works best to allow for a flip, in terms of grind, pack and fullness.
 
Last edited:
Concert Amp,

adam_baumm

Well-Known Member
I am fairly pleased with this pax 2, I am glad I have it now as my secondary and stealth vape.
But yes, this dang thing reeks. Its in two pouches in my gym bag, and my whole bag reeks. So I will get a ryot case, I would also like to see what end caps are available. I am getting fairly good vapor depending on some variables.
 
adam_baumm,

jambandphan03

in flavor country
I am fairly pleased with this pax 2, I am glad I have it now as my secondary and stealth vape.
But yes, this dang thing reeks. Its in two pouches in my gym bag, and my whole bag reeks. So I will get a ryot case, I would also like to see what end caps are available. I am getting fairly good vapor depending on some variables.

You can find a post about end caps here http://fuckcombustion.com/threads/pax-2.17617/page-45#post-777001

I have a set and they seem to work for me, not sure how they do inside a bag that traps air, but when I have them on the pax2 I can't smell it like when it's just sitting there without them. They are a snug fit and seem to create a bit of a vaccume when you slide them on.

Y6yFblG.jpg
 

TheDog

Member
Has anyone tried removing the bottom screen and fitting a regular pipe/mesh screen (cut to size) on the bottom?
This would be to increase air flow and cheaper if you lost your original screen.
I wonder if you could make a sandwich just with 2 pipe screens?
Hmmmm.
 

Vapetrees

Vaped Out
lots of pax 2 skins just popped up on ebay

think im going to get the one that looks like a cigar!
$_57.JPG
Looks nice but stealth wise it doesn't help the cause lol. I ended up getting a space one which is a bit more inconspicuous. Thanks for the heads up though.

My design is so perfect, the flared mouthpiece fits snugly into the mold I made!
Have you thought about making a packing tool for the Pax2. I think that could make you some money too. Something like this http://www.thingiverse.com/thing:781099
 
Last edited by a moderator:
Vapetrees,

Delta3DStudios

Well-Known Member
Accessory Maker
Have you thought about making a packing tool for the Pax2. I think that could make you some money too. Something like this http://www.thingiverse.com/thing:781099
Thanks for the link!

I could, although I'd need access to a Pax2, sadly right now I don't have access to one. However I'm hoping to have one next month. I'll look into this.

Playing with my silicone casting process today, altering the viscosity of the material before injecting, hopefully that helps!
 

Vapetrees

Vaped Out
Thanks for the link!

I could, although I'd need access to a Pax2, sadly right now I don't have access to one. However I'm hoping to have one next month. I'll look into this.

Playing with my silicone casting process today, altering the viscosity of the material before injecting, hopefully that helps!
Darn that sucks, you wouldn't be able to do it with just the dimensions?
 
Vapetrees,

Delta3DStudios

Well-Known Member
Accessory Maker
Darn that sucks, you wouldn't be able to do it with just the dimensions?
I prefer to have the actual vape because most of my designs undergo 10-20 revisions before I ever feel confident publishing it on my store.

I already have someone who has offered to ship me a P2, like I said - gimme a month or so ;)
 
Delta3DStudios,
  • Like
Reactions: Vapetrees

Vapetrees

Vaped Out
I prefer to have the actual vape because most of my designs undergo 10-20 revisions before I ever feel confident publishing it on my store.

I already have someone who has offered to ship me a P2, like I said - gimme a month or so ;)
Nice! :tup:
I contacted the ebay seller of these skins. this one should be available next week. I am going to hold out for this one for my platinum pax2. A skin and a smell proof case is exactly what I need. Now I need to find a case?
$_57.JPG
Sick I like that one too because it could pass as a small camera.
 

Custom Flower Hardware

Well-Known Member
Manufacturer
I am fairly pleased with this pax 2, I am glad I have it now as my secondary and stealth vape.
But yes, this dang thing reeks. Its in two pouches in my gym bag, and my whole bag reeks. So I will get a ryot case, I would also like to see what end caps are available. I am getting fairly good vapor depending on some variables.
the smallest dime bag pouches work perfectly :)Velour inside too!
 

VegNVape

Increase the Peace
Company Rep
Ha ha! Is this serious?!

It actually has 'Pax', 'Vaporizer' & '4.20' printed on it :lol:

I guess it's really just for the novelty factor as opposed to honestly providing any stealth like qualities.

To me that skin would make a Pax look far more suspect. And yep @steama I would agree with your assessment of it's appearance, and to my mind it would only be doing an injustice to the device itself.

However that is only an opinion, & I am a great believer in 'each to their own' :nod:

But a smoking camera can create it's own problems . . .
Smoking-Camera.jpg

;)


:peace:
 
Last edited:

Delta3DStudios

Well-Known Member
Accessory Maker
I got the end caps that were noted a couple pages back. They really smell like plastic. I need to give them a wash to see if their oder will improve.

Thank you for this comment, didn't realize how strong they smelled!
I've looked into it and there are 2 safe easy methods to deodorize these caps:
1) Baking Soda + Hot water. Soak caps in mixture (1/4 cup BS to 1qt water) - Let dry. Repeat as necessary
2) Vinegar + Hot water (2:1 ratio). Same process - soak, dry, repeat if necessary.

Once I figure out the best solution, I'm going to deodorize all other caps in my inventory

Edit - looks like hot water + vinegar is working better than Baking Soda. I am soaking them in Hot Vinegar Water for 1 minute, removing them and drying off for 10-20 minutes. Then repeat several more times.
 
Last edited by a moderator:

Concert Amp

Active Member
Thank you for this comment, didn't realize how strong they smelled!
I've looked into it and there are 2 safe easy methods to deodorize these caps:
1) Baking Soda + Hot water. Soak caps in mixture (1/4 cup BS to 1qt water) - Let dry. Repeat as necessary
2) Vinegar + Hot water (2:1 ratio). Same process - soak, dry, repeat if necessary.

Once I figure out the best solution, I'm going to deodorize all other caps in my inventory

Edit - looks like hot water + vinegar is working better than Baking Soda. I am soaking them in Hot Vinegar Water for 1 minute, removing them and drying off for 10-20 minutes. Then repeat several more times.

Thanks for the tip! I'll give that a go.

Sorry to say anything negative, but I had assumed it was something that could be corrected with a good cleaning.
 
Status
Not open for further replies.
Top Bottom