• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued The Persei Vaporizer for herbs and concentrates.

lonelyhero

the lost soul
Company Rep
Are you checking ohms using the w9 meter or a digital meter? if digital maybe a setting was wrong or I've seen meters that default to 1ohm instead of zero so maybe it was actually a 1 ohm coil?
 
lonelyhero,

bdmonkeyj3w

Well-Known Member
Are you checking ohms using the w9 meter or a digital meter? if digital maybe a setting was wrong or I've seen meters that default to 1ohm instead of zero so maybe it was actually a 1 ohm coil?

Id love to believe i was using my multimeter wrong, but thats not likely the case. Each time i did different amounts of wrap, my first was 5.8, second was 2.8 and third was 2.1. Never dipped below 2 on the meter, and the last one burned out on my first test at 3.7v.
 
bdmonkeyj3w,

stroonz

Abiding Dude
Damn. I wish w9 would have an option to modify or cancel an order. I keep forgetting to add stuff I can use. Gonna get killed on shipping and handling charges.
Took advantage of the sale and ordered the Persei. Forgot to order an 18650 battery.
Is a Persei at 3.7v equivalent to an Omicron?
 
Last edited:

itschad

Well-Known Member
do you have the new or old button assembly? the center pin is adjusted and seated correctly?

How long does it take to see a glow on the coil?

Is the SR71 bottom adapter adjusted for the 8?

new button assembly. pretty sure the pin is adjusted correctly, KISS and globe work fine/better than on persei

core @7.4v, on the persei it glows in about 8 seconds


core @ 7.4v, on the 8 it glows in about 23 second


i have not adjusted the SR71 bottom so that's probably the issue. This is the very first SR71 bottom which does not have o-ring slots for a nibbler. How should I adjust that? Down a bit?
 
itschad,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
does the 8 support 18500 batteries?
(2)18350 yes
(1)18650 yes
cr123a?
(1) 18350?
really wanting to get an 8 now that I see people's problems are being worked out I've airways been afraid of being a beta tester, but it's looking like it's the time to pull the trigger

The 8 is guaranteed to work with


1x18350
2x18350
1x18650

new button assembly. pretty sure the pin is adjusted correctly, KISS and globe work fine/better than on persei

core @7.4v, on the persei it glows in about 8 seconds


core @ 7.4v, on the 8 it glows in about 23 second


i have not adjusted the SR71 bottom so that's probably the issue. This is the very first SR71 bottom which does not have o-ring slots for a nibbler. How should I adjust that? Down a bit?

The 71 bottom adapter has a center pin that has a flat head slot on both sides you would need 2 flat head screwdrivers.

1/4 turn counter clockwise.

If you are not able adjust it properly do this for me.

Take a stop watch count how many seconds it takes for your herd to glow, package it up and send me a clean 8 the batteries and Hercules after you speak with @SamuraiSam i will then fully test it and see if I can beat your time.


@stroonz send me a pm of your order number and we can modify it.
 
THC SCIENTIFIC,

Darb

Well-Known Member
Hey @THC SCIENTIFIC Are there any other shipping options other than what's listed on your site?
I'm trying to order 4 kiss globes but it says $29.35 for shipping to Canada.
 
Darb,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Hey @THC SCIENTIFIC Are there any other shipping options other than what's listed on your site?
I'm trying to order 4 kiss globes but it says $29.35 for shipping to Canada.

only what is available online.

With our practices we have almost for certain eliminated fraud and charge backs. The shipping methods are the reason and we can not alter them anymore.


How ever because of our practices one thing that is up for discussion is the signature required as we are exploring the possibilities of it no longer being needed.
 

bdmonkeyj3w

Well-Known Member
HOLY SHIT! So alot of crazy things happened. I ordered yesterday, it shipped out yesterday, and on usps no less! I assumed at best id get it monday, nope! Bam! They delivered 2 ceramic carts and a dual coil 10 min ago. So rebuilding carts can take a back seat for a minute... Just wanted to leave first impressions:

Dual coil ti: A little disappointed its not the black ceramic, as i feel like theres an odd taste from the white. Well see after a few more rounds.

Ceramic donut: Super flavorful! New portable favorite(hercules excluded). It takes a little to warm up and the black donut moves around a bit, but well done.

Thanks for the quick ship guys! I figured with the traffic volume i wouldnt see that till next week!!
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
HOLY SHIT! So alot of crazy things happened. I ordered yesterday, it shipped out yesterday, and on usps no less! I assumed at best id get it monday, nope! Bam! They delivered 2 ceramic carts and a dual coil 10 min ago. So rebuilding carts can take a back seat for a minute... Just wanted to leave first impressions:

Dual coil ti: A little disappointed its not the black ceramic, as i feel like theres an odd taste from the white. Well see after a few more rounds.

Ceramic donut: Super flavorful! New portable favorite(hercules excluded). It takes a little to warm up and the black donut moves around a bit, but well done.

Thanks for the quick ship guys! I figured with the traffic volume i wouldnt see that till next week!!

Yes we had 5 shippers yesterday and for yesterday alone.


As for the dual coils being white,

This is only because it's impossible to use black in that form factor.

Expect the new black ceramic dual coils in a few.
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Got my donut and dual coils an hour or so ago. It's crazy how quick it got here.

I've always been skeptical of the dual coil idea, but I'm actually digging it. I tried two little snakes on each coil and got 1~1.5 hits out of it. I tried a much bigger bb across both coils and god 1~1.5 hits out of it. I figured there must be some in the cup, but it was pretty clean. The dual coil seems to vape pretty thoroughly, I'm looking forward to trying it out more to see if I like it better than single coil.

The taste on the donut is bananas. My omi lite starts getting really hot after using it though. Also I start drooling like crazy. How much are people putting in and how are you doing the button presses? I just loaded around .1 (another .1 a little later) and was riding the button a ton. I feel like it's hungry and I'm not putting in enough, I'm not sure what the best technique is yet.

Also, weeeeeeeee.
 
I made 2 orders for the sale. The later order I made is already here, other one took a nap in transit, and it's the one with my donuts and dual coils. Both packages went the same route, one just never left the LA sorting facility. Hope I get it Monday, I'm pumped to try the new atomizers. Excited to try the Okeanos and attempt some cool KISS rebuilding this weekend, since some of my stuff came so quickly!
 
Last edited:

Skeena

Standing stone faced like a statue.
It would be really great if you offered other shipping options, every time I have received my order I have not even had to sign.
 
Skeena,
  • Like
Reactions: Darb

Soflo

Only birdshit and fools
@THC SCIENTIFIC I ordered an 8 an a SR71 and some coils but made 2 separate orders.
is there any way you can combine the orders?
also is there any way you can make sure I get a newer style button assembly for the 8?
is there a possibility you can adjust the herc so I will know where to put it back to after cleaning it?
 
Soflo,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC I ordered an 8 an a SR71 and some coils but made 2 separate orders.
is there any way you can combine the orders?
also is there any way you can make sure I get a newer style button assembly for the 8?
is there a possibility you can adjust the herc so I will know where to put it back to after cleaning it?

if two separate orders then i have to cancel both orders and you have to replace it, just no way around it.


As for the 8, all 8's shipping now have the new button assembly along with the revision inside the button assembly. I posted about this its a small thing piece of plastic disc that makes sure the button cover and the internal gold plated disc to not come into contact at all.

As for the SR71 yes i can set it up and show you, but its still best to take it apart clean it and put it back together to get the feel of the unit.


@Breathemetal the disposable 1701 has the black wick on top so once it absorbs the oil it will fire, but at first you need to just throw the oil on top and melt it in.
 

Breathemetal

Well-Known Member
Im done with cleaning i think ill just learn how to rebuild them. Cleaning is a waste imo, just fouls the coil up.
 
Breathemetal,

tharealmclovin

Well-Known Member
@THC SCIENTIFIC i have an original SR71 (2 probably) with the original coils. Never really got it to work very well, maybe it was just me. Had some nice puffs, but never really Reliably. Is the SR74 easier to use? If so, Can I upgrade? Is the sr-71 upgrade kit necessary?

I'm tired of leaky kiss carts, time to use the herc hopefully
 
tharealmclovin,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC i have an original SR71 (2 probably) with the original coils. Never really got it to work very well, maybe it was just me. Had some nice puffs, but never really Reliably. Is the SR74 easier to use? If so, Can I upgrade?

I'm tired of leaky kiss carts, time to use the herc hopefully

Send me a pm let me see what we can do to get you up and running.
 

herbivore21

Well-Known Member
Awesome.
Ill definitely be getting one
Cant wait for my dual coil donut and mini all my other carts are nasty....bleh. I dont like the whole iso cleaning method it just makes em taste shitty
Man if your carts taste bad after cleaning with ISO, you have most definitely not gotten all the ISO out of the cart before use! This is not good for your health!

I clean my KISS carts and globes with ISO and have ever since I started using them and never get any adverse taste from cleaning, quite the opposite - they come up like new.

The key here everyone, is to make sure that after you have soaked your cart in ISO (not for too long, I find that half an hour to an hour is plenty for the most gunked cart!), that you thoroughly rinse with water and allow to completely dry before using it again.

This goes for anything you clean with ISO or ethanol - you don't wanna breathe in the thermal degradation byproducts of these chemicals!
 
Top Bottom