murf2010
Well-Known Member
Your correct, I'm wrong. The minivap is huge and sometimes I forget it's considered portable
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Your correct, I'm wrong. The minivap is huge and sometimes I forget it's considered portable
Mrmrmrmr
Well-Known Member
Which is the very reason I'm currently using the mighty more then the MV. It's far more stealth and discrete. Effects aren't that bad either
murf2010
Well-Known Member
Which is the very reason I'm currently using the mighty more then the MV. It's far more stealth and discrete. Effects aren't that bad either
I'm getting closer and closer to breaking down and getting a one
MinnBobber
Well-Known Member
................................................................................
Agree 100% BUT quality is subjective, means different things to different people.
And many of my vaping friends swore their XYZ vape had highest quality vapor UNTIL they tried the miniVAP.
I do like the Mighty a lot and frequently think about getting one, newest vape syndrome. I have used a buddy's Mighty a lot and it is slick, high tech, etc but then I realize I don't really NEED a Mighty...
Might end up with a Mighty sometime
shredder
Well-Known Member
I'm getting black or dark dust under the bottom screen, and sticky side walls. I started using a dry q-tip to swab out a hot/warm bowl, and it seems to work fairly well. I cleaned my screen several times but I think I'm about ready to swap out a screen.
adam_baumm
Well-Known Member
I swap the bottom screen once every week or two. Boosts performance back.
WakeAndVape
VapeLife X
no, not at all...i think that contributes to loss of performance for heavy users as well...I'm thinking dental Floss might do the trick if I can figure out how the intake is assembled, mine personally had dust and debris from being in my pocket and I blasted it with compressed air
you throw them away?
you have the patience of a fucking monk
I read about the mighty for a day and saw two videos and luckily my ascent screen went out and I had an excuse to grab that shit INSTANTLY! I respect that...lbvs
adam_baumm
Well-Known Member
I soak the screen in iso, clean the bottom of the oven, then put new or cleaned screen back in.
murf2010
Well-Known Member
no, not at all...i think that contributes to loss of performance for heavy users as well...I'm thinking dental Floss might do the trick if I can figure out how the intake is assembled, mine personally had dust and debris from being in my pocket and I blasted it with compressed air
you throw them away?
you have the patience of a fucking monk
Ya in breaking down slowly, more or less waiting for pay day. Where did u order from
I would be very impressed if there were already fake Mighty's. I heard something along these lines in the Arizer Air thread as well and it was just a rumour. One thing that I think kicks ass is the fact that they are Made in Germany!
They need to make a commercial like this for the Mighty (and Crafty) but replace the VW with S&B and the cars for vapes! YA! YA! YA!
They need to make a commercial like this for the Mighty (and Crafty) but replace the VW with S&B and the cars for vapes! YA! YA! YA!
Michel
Well-Known Member
Thanks for your answer, I'm experiencing the same, perhaps I should explain myself better or provide some photos. With air intake I mean where the air travels into heater, the very first gap just above the display. My side-walls are so gunked, it's nearly impossible to clean the bowl like new anymore. With the very fine scratches from taking the sieve out and putting them back in the resin has something to stick on. Tried a ISO-soaked cotton ball for minutes in the bowl already, doesn't work. Never had this problem with the volcano, but there I was never tamping down bowls, so I think @radiant34 is right about build up in the bowl from compressing the load.
no, not at all...i think that contributes to loss of performance for heavy users as well...I'm thinking dental Floss might do the trick if I can figure out how the intake is assembled, mine personally had dust and debris from being in my pocket and I blasted it with compressed air
you throw them away?
you have the patience of a fucking monk
I'm more concerned about the heater itself... I hope it's not gunky like the bowl is, but since there is even resin on the intake I can't imagine how vapor is making his way through the device without causing some build-up. I hope it doesn't affect performance too much over time. If so I will sadly have to get some free gifts while warranting my device.
If anybody is interested in a MV, read the thread over there before buying one (I think you would anyway, even without my advice
)I can agree that in terms of taste the MV is way better than the Mighty, we could name it vapor quality. But it's dry to the throat if you don't have WT or glass or anything like this. I mean really dry, not to say harsh. With the provided accessoires it's not usable, you have to buy something on top if you don't have a box of accessoires. Whips are only cooling, the vapor is still harsh. I think this is caused due to particles and plant materials you inhale a lot if you use the MV like it's sold. The Mighty CU does a much better job catching these particles in the very turbulent vapor path it has. The vapor of the MV is so hot with the plastic mouth piece and just the flexicone plus that the taste has a bitter side-taste. I have to agree @murf2010. The Minivap is an around-the-house-vape exclusevly. It's too beautiful to just throw it in your back-pack or even the car, you should always carry it in the provided bag (and a seperate bag for glass and WT).
If I'll ever find out how to enjoy the MV dry and not needing a bunch of accessories I'll come up with a solution for the portability problem a friend of mine is currently working on.
Anyways, the mighty hits much harder imo, and this is luckily not the MV thread. I should add, I use my mighty with maximum conduction effects with obviously gunks the bowl faster. Perhaps I shouldn't and only load half the amount more fluffy to prevent the bowl from resin... Like I did with the MV. But since I now the Mighty eats even tamped ungrinded nugs I did this perhaps too often.
I'm still looking for a desktop which can beat the mighty in terms of vapor quality and conduction effects without using water. E-nano? Glass core minivap? Plenty? Even thinking of concentrates and the omicron for faster recreation...
Edit: @PPN , it's not the mighty, but it gives you an impression of the production process: http://www.storz-bickel.com/shop_eu/en/company/
Last edited:
Ordered my second Mighty yesterday around noon, and it's out for Delivery today! POW! Huge shout out for TorontoVaporizer! Can't even imagine life without Mighty. It has literally changed my life!
Can't wait for Twin Mighties!
EDIT: IT HAS ARRIVED!! Time for OCD opening ceremonies, cleaning, and burnoffs! lol
Last edited:
Alan Partridge
Smell my cheese
Thanks for your answer, I'm experiencing the same, perhaps I should explain myself better or provide some photos. With air intake I mean where the air travels into heater, the very first gap just above the display. My side-walls are so gunked, it's nearly impossible to clean the bowl like new anymore. With the very fine scratches from taking the sieve out and putting them back in the resin has something to stick on. Tried a ISO-soaked cotton ball for minutes in the bowl already, doesn't work. Never had this problem with the volcano, but there I was never tamping down bowls, so I think @radiant34 is right about build up in the bowl from compressing the load.
I'm more concerned about the heater itself... I hope it's not gunky like the bowl is, but since there is even resin on the intake I can't imagine how vapor is making his way through the device without causing some build-up. I hope it doesn't affect performance too much over time. If so I will sadly have to get some free gifts while warranting my device.
If anybody is interested in a MV, read the thread over there before buying one (I think you would anyway, even without my advice
I can agree that in terms of taste the MV is way better than the Mighty, we could name it vapor quality. But it's dry to the throat if you don't have WT or glass or anything like this. I mean really dry, not to say harsh. With the provided accessoires it's not usable, you have to buy something on top if you don't have a box of accessoires. Whips are only cooling, the vapor is still harsh. I think this is caused due to particles and plant materials you inhale a lot if you use the MV like it's sold. The Mighty CU does a much better job catching these particles in the very turbulent vapor path it has. The vapor of the MV is so hot with the plastic mouth piece and just the flexicone plus that the taste has a bitter side-taste. I have to agree @murf2010. The Minivap is an around-the-house-vape exclusevly. It's too beautiful to just throw it in your back-pack or even the car, you should always carry it in the provided bag (and a seperate bag for glass and WT).
If I'll ever find out how to enjoy the MV dry and not needing a bunch of accessories I'll come up with a solution for the portability problem a friend of mine is currently working on.
Anyways, the mighty hits much harder imo, and this is luckily not the MV thread. I should add, I use my mighty with maximum conduction effects with obviously gunks the bowl faster. Perhaps I shouldn't and only load half the amount more fluffy to prevent the bowl from resin... Like I did with the MV. But since I now the Mighty eats even tamped ungrinded nugs I did this perhaps too often.
I'm still looking for a desktop which can beat the mighty in terms of vapor quality and conduction effects without using water. E-nano? Glass core minivap? Plenty? Even thinking of concentrates and the omicron for faster recreation...
Edit: @PPN , it's not the mighty, but it gives you an impression of the production process: http://www.storz-bickel.com/shop_eu/en/company/
Mighty > Plenty imo
Vapour quality for me doesn't necessarily mean taste but thick smoke like clouds that hit hard. I was a heavy ex-smoker and I like the mighty as it replicates that very well. How does the minivap stack up against the mighty in this respect?
WakeAndVape
VapeLife X
[
I purchased it locally for $405 (before tax) if I would have ordered online, I would have purchased a crafty, because that's the one I was lusting after first, but since they didn't have the crafty locally I just got the mighty, because the anticipation of fedex/ups would have killed me...glad I did, fuck the crafty
Alan Partridge
Smell my cheese
Try using some warm water on the cotton bud rather than ISO. Scrub it hard and the gunk should come right off
WakeAndVape
VapeLife X
I might have to try water instead of iso next time, the one trick I have for @Michel is to clean while the bowl is warm (which you probably already do) that makes the resins come off easier as well
New mighty works flawlessly, also serial # 12xxx, tripping out a bit because the last 2 digits in the serial # are 34 (wife's age) and the older Mighty ends in 39 (my age)! Guess the new one is hers! lol
Looking forward to a glass Y adapter for getting two Mighties stoned at once!
Looking forward to a glass Y adapter for getting two Mighties stoned at once!
Michel
Well-Known Member
Exactly my words! And since the mighty can provide this without making me even cough (most of the times) I felt in love with this vape... I would rate the MV near to the Mighty if circumstances and conditions are perfect and you are modding it. If you have the chance to get one of the calibrated/hotter/better/newer MV's, apparently it could outperform the mighty. A little like playing lottery....
The Volcano above 200'C and a very full bowl can outperform the MV imo in terms of cloud production
GrkCdn
Member
New mighty works flawlessly, also serial # 12xxx, tripping out a bit because the last 2 digits in the serial # are 34 (wife's age) and the older Mighty ends in 39 (my age)! Guess the new one is hers! lol
Looking forward to a glass Y adapter for getting two Mighties stoned at once!
Geez! They really dropped the ball for me lol it's out for delivery now. I got some haze parts and I have enough grinders so they gave me a Zeus cleaning kit instead. I wonder how well it'll work!
Biohacker what is your process when you get your unit? What do you clean? How long a burn off? Do you charge it first and for how long?
shredder
Well-Known Member
I looked at a minivap before I bought a mighty, and came to the same conclusion. The thread tells the story pretty well.
Last edited: