The Grasshopper
- Thread starter Zenpen
- Start date
-
- Tags
- grasshopper
- Status
Bass Vaper
Well-Known Member
I forgot to ask, and I saw some back and forth about it:
Do you pack the tip or the body, or either one?
What happens if you don't turn it on and off after each hit? Seems like the review and posts were leaning towards turning it off and on vs letting it run.
As far as accessories, they offer a stainless steel case ($35) and the leather sleeve. I'd post a pic if I knew how.
Do you pack the tip or the body, or either one?
What happens if you don't turn it on and off after each hit? Seems like the review and posts were leaning towards turning it off and on vs letting it run.
As far as accessories, they offer a stainless steel case ($35) and the leather sleeve. I'd post a pic if I knew how.
Last edited:
JiggyJack
Well-Known Member
You pack the body. Originally it was designed to pack the tip but they changed it for a number of reasons.
It is primarily a convection vape so unless you are pulling hot air through it shouldn't keep vaping the chamber too much. I think because of the 5 second (or less) heat up time you might as well just turn it off in between hits.
johnnyCanuck
Well-Known Member
You pack the body.
As for leaving the vape on, I believe automatic shut off is at 18 seconds. Since it only takes 5 seconds to heat up, Buzz was going under the assumption that he'd save battery life if he shut it off right after hitting it each time.
vapebuddy13
Your resident Super Hero
Doss it have an 18 sec turn off? Vid buzz put up had him and his bud passing it n seemed longer than that... Main reason to turn on and off seems to be to keep the mouthpiece from getting too hot n fast heat up makes it not much of an issue to keep turning it off
Uzer
Well-Known Member
I thought it shuts off if you don't draw on it for 18 sec...? Drawing resets the timer. I could have dreamed that.
johnnyCanuck
Well-Known Member
You'd be correct.
Mouth piece doesn't get hot while the unit is on and when there is no pull. Like I said, it was Buzz assuming that you'd get more time with respect to battery life by manually shutting the unit off after every pull.
vapebuddy13
Your resident Super Hero
Ah thought you meant in general 18 sec, not of no draw, my b
BuzzDanklin
Well-Known Member
I missed a few questions, sorry about that, but better late than never right?
I still haven't cleaned it by dropping the front end into ISO unfortunately, sorry. I keep being lazy and have only done quick swipes on the inside of the body with a q-tip dipped in iso, it's mainly the screen I need to clean, the body stays fairly clean for me (I am mostly using a santa cruz shredder grind, so its fairly chunky, and not very powdery/fine which might make you have to clean the body more often)
When it auto-shuts off, you do need to click it twice.
My experience with the GH so far has been very good, it's still working just like when I got it. I am still using it quite a bit, I always take it with me if I am in town, and it's great for quick top-ups around the house. It can get me fully medicated faster than any other vape I have, so it gets used fairly often in that situation at home. It is also usually the vape I break out if someone who usually combusts comes over, the GH puts out dense vapor so it goes over well with non vapers.
I use most of my vapes semi-often, around once a month or so. I like to switch it up for a change of pace, and it's always fun using different vapes/techniques. I do have a few select vapes that I dont ever use anymore though like the PuffitX.
I have 7 vapes that I use the most. The Volcano, and the Cloud Evo get used the most while I am home. I also use the Mighty/Crafty/Pax2/Firefly/Grasshopper often both at home and when I am out.
I also use the Air/Haze more than the rest, but not as often as the previously mentioned ones.
I still haven't cleaned it by dropping the front end into ISO unfortunately, sorry. I keep being lazy and have only done quick swipes on the inside of the body with a q-tip dipped in iso, it's mainly the screen I need to clean, the body stays fairly clean for me (I am mostly using a santa cruz shredder grind, so its fairly chunky, and not very powdery/fine which might make you have to clean the body more often)
When it auto-shuts off, you do need to click it twice.
My experience with the GH so far has been very good, it's still working just like when I got it. I am still using it quite a bit, I always take it with me if I am in town, and it's great for quick top-ups around the house. It can get me fully medicated faster than any other vape I have, so it gets used fairly often in that situation at home. It is also usually the vape I break out if someone who usually combusts comes over, the GH puts out dense vapor so it goes over well with non vapers.
I use most of my vapes semi-often, around once a month or so. I like to switch it up for a change of pace, and it's always fun using different vapes/techniques. I do have a few select vapes that I dont ever use anymore though like the PuffitX.
I have 7 vapes that I use the most. The Volcano, and the Cloud Evo get used the most while I am home. I also use the Mighty/Crafty/Pax2/Firefly/Grasshopper often both at home and when I am out.
I also use the Air/Haze more than the rest, but not as often as the previously mentioned ones.
vapebuddy13
Your resident Super Hero
That's some great stuff to hear, thanks buzz!
Grepper
Truth to prevail
Update is here! Looks like titanium has arrived!
Hey Everyone,
Bulk machined and molded parts have arrived.
Titanium on the left, Stainless on the right.
The Grasshopper Team
Trevor Vita
Hey Everyone,
Bulk machined and molded parts have arrived.
Titanium on the left, Stainless on the right.
The Grasshopper Team
lwien
Well-Known Member
As some of the vets here will understand, it could then be called the GH Pandora.
fonzerelli
Well-Known Member
Too much detail with that update.
mitchgo61
I go where the thrills are
Last edited:
SmokinMagic
Well-Known Member
Thanks for the reply Buzz! No worries about not having dropped it in iso yet. I take that as it needs little maintainence so that's good.
It doesn't really bother me that you have to click it twice, but it's good to know ahead of time that you do.
lwien
Well-Known Member
I see pictures of parts, and pictures of boxes. But no picture of assembled parts in a box.
Kinda reminds me of this:
Is the ti unit
lwien
Well-Known Member
Here’s an update for you from the ‘Grasshopper Vaporizer’ team:
1 new Announcement:
Hey Everyone,
Bulk machined and molded parts have arrived.
Titanium on the left, Stainless on the right.
The Grasshopper Team
Visit the ‘Grasshopper Vaporizer’ campaign.
1 new Announcement:
Hey Everyone,
Bulk machined and molded parts have arrived.
Titanium on the left, Stainless on the right.
The Grasshopper Team
Visit the ‘Grasshopper Vaporizer’ campaign.
t-dub
Vapor Sloth
Lifes the same . . . I'm moving in stereo. Lifes the same, except for my shoes . . . 
Update is here! Looks like titanium has arrived!
Hey Everyone,
Bulk machined and molded parts have arrived.
Titanium on the left, Stainless on the right.
The Grasshopper Team
Trevor Vita
Here’s an update for you from the ‘Grasshopper Vaporizer’ team:
1 new Announcement:
Hey Everyone,
Bulk machined and molded parts have arrived.
Titanium on the left, Stainless on the right.
The Grasshopper Team
Visit the ‘Grasshopper Vaporizer’ campaign.
lwien
Well-Known Member
Lifes the same . . . I'm moving in stereo. Lifes the same, except for my shoes . . .
Grokit edited his post and ruined everything......
No, it was @Grepper that scooped you. You're gettin' slow in your old age!Grokit edited his post and ruined everything......
Haha prove it (
- Status