next generation e-nails?

jpdnkstr

Well-Known Member
My Volcano has been dormant because I hate bags too!(at least Volcano ones) I've been considering getting the EZ valve to hook it to my water pipe but haven't made the move yet
 
jpdnkstr,

BoogerMan

Well-Known Member
My Volcano has been dormant because I hate bags too!(at least Volcano ones) I've been considering getting the EZ valve to hook it to my water pipe but haven't made the move yet
Yeah I hate the standard volcano bags too. They are too skinny in diameter and so damn loud! The crinkle noise is insane lol.

I solved that problem by using oven safe turkey bags. The turkeys bags have a much larger diameter (like twice that of the volcano bag) and they aren't nearly as loud and crinkly :tup:

So I get to vape twice as much per bag, without adding any unnecessarily length to the bag (helps keep the end away from 600 e-nails), all while enjoying a much quiter bag :D
 

phooka

Well-Known Member
LOL you sound like my wife! i always used to get the death stare and mute of the TV whenever I busted out the volcano just because she was at that point anticipating the 15 minute long crink-fest. Thanks for the tip on the turkey bags. Saw that in the manual. I'm happy to say its actually not MY volcano, I'm just holding onto it for a friend :dog:
 

Monsoon

Well-Known Member
My daily driver before I got an e-nail was the Silika Titanium Side-Arm banger which was sadly not compatible with standard coils. Looks like they just released one:

http://www.thedabstore.com/products/silika-sidearm-nail-for-e-nails-14-mm-18-mm-male

silika_glass_titanium_enail_dnail_16_mm_coil_sidearm_nail_domeless-2_large.jpg


silika_glass_titanium_enail_dnail_16_mm_coil_sidearm_nail_domeless-1_large.jpg


I'm super tempted to get it even though it's not a female joint and it doesn't seem to be available anywhere else yet.
 

BoogerMan

Well-Known Member
My daily driver before I got an e-nail was the Silika Titanium Side-Arm banger which was sadly not compatible with standard coils. Looks like they just released one:

http://www.thedabstore.com/products/silika-sidearm-nail-for-e-nails-14-mm-18-mm-male

silika_glass_titanium_enail_dnail_16_mm_coil_sidearm_nail_domeless-2_large.jpg


silika_glass_titanium_enail_dnail_16_mm_coil_sidearm_nail_domeless-1_large.jpg


I'm super tempted to get it even though it's not a female joint and it doesn't seem to be available anywhere else yet.
Fucking damnit Monsoon :goon::cuss::rant:

Why did you have to go and post that. You always find good shit!

Now I have to buy it :rofl:

Edit: maybe not. Just noticed it is a male joint only. I'll wait :)
 

BoogerMan

Well-Known Member
http://420titanium.com/collections/...ion-2-14mm-18mm-female-domeless-titanium-nail
Everyone is so good at helping me spend my money around here, I thought I would help someone else!;)

Let us know how it is if you get one!

EDIT: I had to edit this six times to get the right link! Its a good thing I'm better at vaping than I am with computers:D
I had that one. It's for a torch though. Works really well! Doesn't fit an e-nail coil.

The one @Monsoon posted is for an e-nail but it is a male joint and most of my pieces are male joints so I'll wait until Silika releases a female version to buy it :D
 
BoogerMan,

mixchu69

Well-Known Member
Do you guys think there is a big difference if the nail is made for male or female joint, or is it user preference?
 
mixchu69,

BoogerMan

Well-Known Member
Do you guys think there is a big difference if the nail is made for male or female joint, or is it user preference?
Just user preference. Thanks to DHgate I have more 14mm male joint pieces than any other so I prefer my nails to have a female joint.
 
BoogerMan,
  • Like
Reactions: jds32

phooka

Well-Known Member
Male nail I've learned is better because you won't get reclaim in between the joint like you do with female nail. It just pulls down direct inject style into your piece. No stuck nails and sticky messiness. Unfortunately most of my pieces are male so most of my nails are female.

I recommend you get a piece with female joint and nail with male joint!

The exception is female Quartz pieces like the ones from @divinetribe . They have a stem the goes down inside the male joint
So reclaim drips into the piece :tup:
 
Last edited:

jpdnkstr

Well-Known Member
I set my divine tribe unit to the same(20mm 100W coil) PID settings in the Auber manual..... Does anyone see a problem with this? Seems to be working fine
 
jpdnkstr,

Monsoon

Well-Known Member
Fucking damnit Monsoon :goon::cuss::rant:

Why did you have to go and post that. You always find good shit!

Now I have to buy it :rofl:

Edit: maybe not. Just noticed it is a male joint only. I'll wait :)
Just user preference. Thanks to DHgate I have more 14mm male joint pieces than any other so I prefer my nails to have a female joint.
I'm in the same boat except I always use a dropdown since getting an e-nail. Aside from preference, the joint stays clean and cooler which makes it easier to move it between rigs. Anyway I do happen to have a 14F-14F dropdown that's so far has gone unused which makes it even more tempting. I'll mull it over some more but I'll probably wait for it to at least show up in the male form elsewhere since TheDabStore's shipping options to Canada are weird and overpriced. For just the nail the quote was $20 with no tracking and $65 with tracking, no mention of the carrier. 420Titanium would ship it for $8 with tracking so I'll probably go with them if they get it early on. I'm half thinking they're waiting to announce it on 420 and TheDabStore posted it on their site early.
 

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
New-Vape is releasing an all-in-one e-nail kit enclosed in an ammo box. Final version will apparently use blown glass instead of a jar.

http://www.newvape.com/2711/
kZqKi7p.jpg


I'm not really sure what to think of this. I like the concept but I'm not sure about the execution and it seems to be targeting a pretty narrow segment of e-nail market too. I could see it maybe being useful to keep in a shed or secret smoke spot outside, except that you need to plug it in. I see a lot of potential issues in terms of cleaning the airpath inside the unit, heat dissipation from the nail, ergonomics and weight. Also not sure if I'd feel comfortable having this go through Canadian Customs.

-----
Still no word from them on the redesigned drop-down, I'm not in a rush to get it but I'll email them soon to see where it's at. It got a bit clogged from 2 weeks of straight use, warm ISO soak alone didn't help and needed a lot of scraping and a few runs through the ultrasonic cleaner.
..

Hello Monsoon Please have another look at our site for the progress we've made on these.
All of your comments are completely valid. and appreciated. All of our products are at the 420 denver cup this weekend for testing. Booth U7. https://www.newvape.com/products/themed-enails/
All the latest versions now have an external coil port.
 

DieHard

Accessory supplier
Accessory Maker
..

Hello Monsoon Please have another look at our site for the progress we've made on these.
All of your comments are completely valid. and appreciated. All of our products are at the 420 denver cup this weekend for testing. Booth U7. https://www.newvape.com/products/themed-enails/
All the latest versions now have an external coil port.
Hey @NewVape710 Welcome. Good to see more FL 420 businesses.
Get with @vtac for proper Manufacturer Account to keep within the forum rules.
I'd love to try your Grinder for vaping. On your site, black is the only color available. Is that the only color?
 

Monsoon

Well-Known Member
..

Hello Monsoon Please have another look at our site for the progress we've made on these.
All of your comments are completely valid. and appreciated. All of our products are at the 420 denver cup this weekend for testing. Booth U7. https://www.newvape.com/products/themed-enails/
All the latest versions now have an external coil port.

I've been following its development and the changes seem good, I especially like the different case options. I'm not in the market for one so I'm more watching from the sidelines but hopefully you'll get some good real-world feedback at the the Cup.

-----

For the Silika e-nail, I managed to find this pic so it does look like it will be released as a female joint as well.

tumblr_nklzplGpkf1ref322o1_1280.jpg
 

phooka

Well-Known Member
I set my divine tribe unit to the same(20mm 100W coil) PID settings in the Auber manual..... Does anyone see a problem with this? Seems to be working fine
Dunno.
I just kept mine at stock settings and it's been good to me. Link me the auber manual and I can go into my box and check what the settings are if you want. Next time record the default before you change something lol
D-nail just released the silicon carbide nail $100 bucks a pop and works with flat coil I already have a he infiniti with sapphire insert that I have been very happy with but I guess I'll order one and post a review when I get it! http://www.d-nail.com/product-p/d-nail-sic.htm
whoa.
 
phooka,
  • Like
Reactions: jpdnkstr

jpdnkstr

Well-Known Member
jpdnkstr,

phooka

Well-Known Member
http://auberins.com/images/Manual/RDK 100W_supplementary.pdf there is only one parameter they say to change for the 20mm 100w coil, everything else stays, but my initial settings were different than Aubers.

http://auberins.com/images/Manual/RDK-110_Manual_v1.pdf this is the regular manual

it appears to be the same unit as Divine tribe, the PID functions the same.

I am also curious of the wiring schematic of the DIN PIN, so I can tell what other company heater coils I can use.

Thanks for the links, those are helpful to me too! Here's what mine are on the stock divine tribe unit

P = 05.0
I = 100
d = 020
souf = 0.2
ot = 002
FILT = 0

The pinout in the @divinetribe coil is exactly the same as the auber pinout in that manual you linked

1 AC Power to Heater
2 AC Power to Heater
3 TC +
4 TC -
5 Ground

Thankfully there is somewhat of a standard on the wiring of these 5 pin xlr coils across companies. The coil I got from Enhale Nail also has the same pinout and works with my box nicely. The ones at gimido are that pinout too and are currently on sale. I need to not be looking at that and go to work! LOL gotta make money to spend money
 
Last edited:
phooka,
  • Like
Reactions: jpdnkstr

jpdnkstr

Well-Known Member
excellent ! that's why this community is so great. everyone working together find out good info!

thank you by the way for the stock parameters on the Divine Tribe unit

wonder if anyone knows if dnails heaters are compatible
 
jpdnkstr,
  • Like
Reactions: BoogerMan

mixchu69

Well-Known Member
I am looking for either a flat coil or 16mm (currently own 20mm) to use with the SIC nail or HE educated with the sapphire insert. Is gimido the cheapest out there with 4/20 sales?
 
mixchu69,
  • Like
Reactions: BoogerMan
Top Bottom