Cheap High Quality Bubbler

Hoops

Well-Known Member
CCG just gave me a refund on the two eggs I ordered last night. They were able to stop the order before the shipment went out, which made me happy.

While I never said a word about @blankrider or his recent egg issues, Cynthia made it clear she was trying to work things out with him beyond the $10...which was nice to hear.

I'll wait a bit longer. In time, I may reorder. Thanks to all for the quick initial feedback on the 12" eggs.
 

BoogerMan

Well-Known Member
I finally got around to looking closer at my CCG egg (I just did a quick water test earlier).

The joint support on mine also goes into the female joint slightly and only allows two of my gongs to work. A 14mm male to 18mm female and my e-nano 14mm water adapter gong.

The rest, including my drop downs, can't go into the female joint far enough to make an airtight seal.

This piece is just about on the useless list for me :bang:

I may take my Dremel tool and grind down the joint support on the inside of the female joint but if I slip I'll probably crack the joint :\ maybe I'll give it a go tomorrow when I'm not medicated.
 

Monsoon

Well-Known Member
I got a reply back from CCG about this whole mess (I linked them to the post), hopefully @blankrider can confirm the details:

2wnczrp.jpg


So I guess make sure to emphasize that any defect makes it non-functional for you to use when asking for a replacement.
 

BoogerMan

Well-Known Member
Glad CCG is taking care of things.

I was feeling lucky so I took the diamond drill bit to the joint problem :D I shaved off maybe 1mm if that and that was enough :tup: it works with all my gongs now.

Perc is still super draggy but lower water levels help. Still sucks to clear like @Monsoon said! BTW Monsoon, did your CCG egg have the joint support issue like Blankriders and I?

Make sure you have a steady hand if you try this!!!!

Before
551AFCA6-22D7-4159-80EF-2CCC91545DA0_zpsa2kzvyx6.jpg


After
BBD86F73-F6E3-49AD-A330-80CF435B5A6C_zpsvmtmifvd.jpg
 
Last edited:

Herr_Dampf

Well-Known Member
Guys, if you plan on doing your own cold work on glass, at least keep the worked spot and the tool surface wet (and cool). Also wear safety glasses and a protective mask. This reduces the chance of a catastrophic failure and protects you from the fine glass dust. :2c:
 
Last edited:

blankrider

Well-Known Member
Hey guys, I just want to say how much I love this forum and a big THANK YOU to anyone who gave me their support for the defective egg I received.

If you liked my post, canceled your order, sent them a message, waited for this to be resolved to order, said a prayer, whatever. Thank you because it worked. :clap::rockon:

Clean and clear glass sent me a message with 2 options. The first one, which I chose, was to go to a special link for broken glass and pay $1 with original order number in message line. I got a new order number and will let you guys know when it ships out. I will also report back when it arrives. The second option was they would send it free with next order. I thought about getting one of those 9 inch eggs but I'm going to wait for some reviews.

I would like to congratulate you @BoogerMan for successfully grinding down the bump on the inside of the joint. You are a brave man and must have a steady hand :tup:
 

BoogerMan

Well-Known Member
Seriously, anyone that doesn't have the Kathy Klein Incycler needs to get one.

It's $5 off right now so the 18mm version without the TI nail is under $40!!!!

http://www.dhgate.com/product/2015-...s/215177116.html#myaccount_orderdetail-1-null

I got the 18mm version and it is amazing (besides the leaky joint which was sealed with non toxic aquarium silicon). Kathy agreed to a replacement so that's nice.

The 15 slit Showerhead is such a breath of fresh air. I feel like the last few pieces I've ordered from DHgate have been very draggy.

This has been my daily driver lately. No vortex on the drain but it seriously pulls like a dream compared to the other new pieces out.
 

mrgohamilton

Well-Known Member
Got my D-cycler in today and man this thing is crafted nice as fuck. the function is spot on, perfect vortex, no marks/scratches/nicks/machining anywhere, and no splash at the mouth no matter how hard i try to pull it.

definitely recommend anyone to order it. The craftsmanship is A+++ so i wouldn't be scared off by the looks of those CCG eggs (mine should be here tomorrow :D)

uploading unboxing and water test in a bit.

anyone got their WOL torus yet?
 
11173694_10203939246467604_150804012_n.jpg
I have been lurking this thread for almost 100 pages now so I figured its time to join the conversation. I have ordered a few things from dhgate now, mostly based off reviews in this thread. I have ordered 2 D-cyclers from CCG, a FC-710 (diffusion pump), FC-711 (mini peyote pillar) and a Starbucks cup rig from Steven. Overall I have been very pleased with what I have got.

I currently have 3 CCG 12" fab eggs on the way. My other orders with CCG were very fast, this one has taken a longer. I ordered them 4/3 and they havent landed in the US yet :( People that have recieved there CCG eggs, what date did you order?

I ordered a WOL torus 3/23. I messaged them asking when my order would ship 4/13 and they messaged me back 4/15 with a tracking number. Im excited to get the WOL torus, the funtion video I saw on this thread is what made me buy it. I paid $85 for it. It was right before it went to $90.

Heres a few pictures of my pieces.
11117486_10203939246147596_57461213_n.jpg

D-Cycler (If anyone is wondering why my enail says E40 its because the light went out in the PID. I used to dab at 650 but when the 6 turned into a E I turned it down to E40 :lol:)

11093374_10203939245467579_1687029420_n.jpg

11173493_10203939245667584_461281591_n.jpg

FC-710 (Diffusion pump) I like to use alot of stickers on my clear glass.

11173694_10203939246467604_150804012_n.jpg

FC-711 (Mini pillar)
 

ChiefKeefe

Well-Known Member
Just messaged CCG hopefully canceling my order for the vertigo and EGG

Thwy think i meant i heard bad reviews on there store, they tried really hard to convince me there good..

hi sir
thanks so much for your order and letter
we are sad to hear that you heard bad review on this store
but we can tell you that it is not what people said
we had doing this store for about one year and you can see the good feedbacks we have so far
if we are really as bad as people talks,then how could we get some many good business?
so we strongly suggest you to keep your order,we believe you will not disappointed on this choice
it is hoped that you could take this matter into serious considertaion and read all our feedbacks
thanks so much again
 
Last edited:

Monsoon

Well-Known Member
Just messaged CCG hopefully canceling my order for the vertigo and EGG

Thwy think i meant i heard bad reviews on there store, they tried really hard to convince me there good..

hi sir
thanks so much for your order and letter
we are sad to hear that you heard bad review on this store
but we can tell you that it is not what people said
we had doing this store for about one year and you can see the good feedbacks we have so far
if we are really as bad as people talks,then how could we get some many good business?
so we strongly suggest you to keep your order,we believe you will not disappointed on this choice
it is hoped that you could take this matter into serious considertaion and read all our feedbacks
thanks so much again
I'm betting they had to deal with a lot of those messages recently, so they probably just assumed. Hopefully it caused them enough stress to up their quality checks in the future.

Now that the Blankrider issue's been sorted out, I put in an order for the 9" clear egg from CCG.
 

wildything

Well-Known Member
Cleanclearglass Egg arrived after a small postal mishap, here is some function:


Sorry Kathy, this egg will now be my daily driver. ;)
How is the drag from the "birdcage" perc on your egg? Im waiting for my ccg egg to get the U.S. still and was very discouraged by the previous reviews and problems some people have been experiencing but I am very pleased to hear you enjoy this over the kathy egg as I have that already and thought i may have made a mistake ordering from ccg.
 

S1N3

Tarzan @ KloudSociety
How is the drag from the "birdcage" perc on your egg? Im waiting for my ccg egg to get the U.S. still and was very discouraged by the previous reviews and problems some people have been experiencing but I am very pleased to hear you enjoy this over the kathy egg as I have that already and thought i may have made a mistake ordering from ccg.

I think I was lucky, with it being defect free and in terms of the perc the function seems on point but compared to kathy's slightly more lung power required. So do expect more drag if you own a kathy egg already. It's nothing you are going to be overly disappointed with.

I also received the FC-186 and the drag on that is a little restrictive, owning a mobius already. In any case that piece is meant for my combusting friends who have been using a 8 yr old roor.


Hey I just wanted everyone to know that the new FC-CAKE is now available from Steven at just under $40US
http://www.dhgate.com/store/product/2015-new-height-15-5cm-glass-cake-bongs-thick/236437216.html
rBVaGFUzKVaACGn_AAMGmyeRJv4732.jpg


Heh I love how he just shoots these in the middle of what sounds like dinner.




Wing of Liberty Just PM'd me this video, still haven't shipped my order but making me yearn to have it in my possession.

@snamuh Link: http://www.dhgate.com/product/wings-of-liberty-12-inchs-bongs-recycler/230065218.html#pd-019
 
Last edited:

John Lewus

Well-Known Member
Seriously, anyone that doesn't have the Kathy Klein Incycler needs to get one.

It's $5 off right now so the 18mm version without the TI nail is under $40!!!!

http://www.dhgate.com/product/2015-...s/215177116.html#myaccount_orderdetail-1-null

I got the 18mm version and it is amazing (besides the leaky joint which was sealed with non toxic aquarium silicon). Kathy agreed to a replacement so that's nice.

The 15 slit Showerhead is such a breath of fresh air. I feel like the last few pieces I've ordered from DHgate have been very draggy.

This has been my daily driver lately. No vortex on the drain but it seriously pulls like a dream compared to the other new pieces out.

I feel like I have enough glass pieces that pull effortlessly so is this still worth it if it does not vortex properly? I have to spent $70 to use my $5 off coupon and I want that FC cake piece from Steven so was thinking to add this one on but I really do have enough Glass that I want something that functions properly. I have yet to own any kind of recycler.
 

snamuh

ghost
I think I was lucky, with it being defect free and in terms of the perc the function seems on point but compared to kathy's slightly more lung power required. So do expect more drag if you own a kathy egg already. It's nothing you are going to be overly disappointed with.

I also received the FC-186 and the drag on that is a little restrictive, owning a mobius already. In any case that piece is meant for my combusting friends who have been using a 8 yr old roor.




Heh I love how he just shoots these in the middle of what sounds like dinner.




Wing of Liberty Just PM'd me this video, still haven't shipped my order but making me yearn to have it in my possession.
Link?
 

BoogerMan

Well-Known Member
I think I was lucky, with it being defect free and in terms of the perc the function seems on point but compared to kathy's slightly more lung power required. So do expect more drag if you own a kathy egg already. It's nothing you are going to be overly disappointed with.

I also received the FC-186 and the drag on that is a little restrictive, owning a mobius already. In any case that piece is meant for my combusting friends who have been using a 8 yr old roor.




Heh I love how he just shoots these in the middle of what sounds like dinner.




Wing of Liberty Just PM'd me this video, still haven't shipped my order but making me yearn to have it in my possession.
A few people have received the WOL incyclers correct?

Has anyone tried to remove the logo? It's not bad compared to others and isn't very noticeable so that's nice :) just wondering if it's etched on or not?
 

mrgohamilton

Well-Known Member
Heres a general look at my D-cycler and a little function test


Excuse my long ass finger nails :lol:

still waiting on my egg, hoping its quality matches that of the D-cycler :shrug: ordered one of the pink eggs too.


that WOL video looks extremely promising
 

beastcoast

Well-Known Member
So I was in Florida the past 4 days on vacation, and read about the CCG egg's defects.. which was unsettling. Egg landed yesterday and just got home, to my package. First thing I checked was the joint support, was good. Next I looked at the perc and was like WTF, there are 8 pinhole dots instead of slits on the showerhead. Right there I thought this piece would be too draggy and trash, but surprisingly I put water it and it functions so fucking sick with minimal drag (given the perc situation) :rockon:. It's an unbelievably impressive piece, the only problem I see is the perc getting clogged too fast to be practical to use, but I'll know the answer to that after I put it to the test tomorrow with the 4/20 festivities. Will report back tomorrow with a function vid and final verdict, but hopefully this should reassure people waiting on theirs that you'll get what you paid for.
sZP3vgq.jpg
 
Top Bottom