E-Nano from Epickai
IFTTT gives a 'once a year' option that works with Wemo. It can be a bit finicky, but the options are endless via IFTTT. Not sure if that helps.
Edit: Ok, options aren't endless as there is no remote wattage control via IFTTT or otherwise that I am aware of.
Last edited:
flotntoke
thoroughly vaped
So glad to see you're finally taking the plunge!! Think you will absolutely love it!!
I go 6.25 myself. Think anywhere between there and 7 would be good depending on your nano, dial, etc, etc. Best thing to do is play with it. Small loads, stir after each hit, find what seems good to you and set her there.
Nice to see you back in nano-land! Think only new thing since you've been around is the nano stand. Looks very cool, but don't have one myself. Your nano still getting any use? Hope so!
nihil
Member, Known Well
Yeah, I don't see any way for it to act as a "dimmer" without putting a a variable regulator in the mix, but then I'd have to ask why the need to begin with? If you remotely power it on, you could set it to your favorite temperature in advance and just give it a start 20 minutes before use (longer heat up time for the lower temperature) .
flotntoke
thoroughly vaped
Would be a fun toy to have, but not really sure what I would use it on. Don't find it necessary for the nano myself. It doesn't use much juice and seems to be doing fine while left on. Probably would be even better if I remembered to turn it down to 4 when not in use - but have had no issues with leaving it at 6+ pretty much all the time.
Cereal_MF
Green goes to brown, n that's what I stand for.
Here's my happy Nano with some Blue Dream. I wish imgur didnt make the photo look so shitty.. http://imgur.com/j3uXZvd
Caligula
Maximus
Every day my friend.
shredder
Well-Known Member
Right now, I'm just a bump, waiting on a log, but thanks to SSVUN-YAH, I have a maple burl enano on its way.
Recently I started a thread on "ask fc" comparing an enano to an underdog. A tough decision that was made easier after SSVUN-YAH's offer to part with one enano from his collection.
I've done some reading and lurking on each log's thread and will take a look at the HI thread as well. I'm new to logs, in fact, I've never seen one in person, lol. But I've had and used a volcano for 6 years and recently bought a mighty, it's a battery operated vape. So far I like the enano's simplicity and natural look. I can't wait to vape with it.
I am impressed with this thread's activity and hope to contribute soon. Prolly with lots of noobie questions, lol. Also I'll soon have some glass to water vape with. On its way are a FC-711 and a FC-187.
Recently I started a thread on "ask fc" comparing an enano to an underdog. A tough decision that was made easier after SSVUN-YAH's offer to part with one enano from his collection.
I've done some reading and lurking on each log's thread and will take a look at the HI thread as well. I'm new to logs, in fact, I've never seen one in person, lol. But I've had and used a volcano for 6 years and recently bought a mighty, it's a battery operated vape. So far I like the enano's simplicity and natural look. I can't wait to vape with it.
I am impressed with this thread's activity and hope to contribute soon. Prolly with lots of noobie questions, lol. Also I'll soon have some glass to water vape with. On its way are a FC-711 and a FC-187.
Sadly, no way to regulate current flow through the device. It's a simple WIFI controlled relay switch.
I'm getting a second WeMo for the Nano for 2 reasons:
1) To monitor power consumption (curiosity, and possibly enough granularity of the data to dial in the dimmer to my favorite settings)
2) Preset schedules - Preheat the nano in the mornings 30 minutes before I wake up, turn off while I'm at work, then turn it back on right before I get home from work. Then switch it off at night after I've gone to bed.
Note, if you get a WeMo motion sensor, you can pair that with the device, to activate the power switch when motion is detected
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Awesome, welcome to the club! That Nano has a little Dog in it after all, so it seems like a perfect fit! Everyone loves a log!
AhBeVapin
Mindful Member Wellness User
Hey now NATION,
Congrats @CarolKing, good call on the extras. Loving the GonG/J-Hook combo, cooler Solo-like vapor.
@*plainlazy* using the Solo as my cord free vape with no intentions of changing (too much invested in PV stems & GonGs).
@EverythingsHazy at E-pic depth I'm at 6-7 but I'm going to try preheating loads at 5-5 1/2 and see how that goes. Load sizes are 50-80mg
AVB out
Congrats @CarolKing, good call on the extras. Loving the GonG/J-Hook combo, cooler Solo-like vapor.
@*plainlazy* using the Solo as my cord free vape with no intentions of changing (too much invested in PV stems & GonGs).
@EverythingsHazy at E-pic depth I'm at 6-7 but I'm going to try preheating loads at 5-5 1/2 and see how that goes. Load sizes are 50-80mg
AVB out
I stir every draw because I'm a cloud chasing fool, but that clogs up the screens fast. You really only need to stir probably once
CarolKing
Singer of songs and a vapor connoisseur
I just bought a 18mm GonG. I wanted to use it with my D020 bubbler. I have the Pinnacle Micro WT but I don't use it all that much. Eventually I will probably buy another bubbler.
I don't think mine has been shipped yet. It still says processing. I just ordered Thursday night. I hope I get it next Friday, I live in Wa. Is Epicvape out of Colorado?
EDIT
California - that's good
I don't think mine has been shipped yet. It still says processing. I just ordered Thursday night. I hope I get it next Friday, I live in Wa. Is Epicvape out of Colorado?
EDIT
California - that's good
Last edited:
shredder
Well-Known Member
I bought a mighty 4-5 weeks ago and absolutely love it. It's bigger than some other portables but that's due to its have two batteries. It heats up in 90 seconds and the batteries last me up to two days. It fits about any style of vaping from water attatchments to loose bowls or firmly packed bowls, fine grind or no grind. It's a portable workhorse.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
AhBeVapin
Mindful Member Wellness User
BoogerMan
Well-Known Member
Just got my Redwood Lace Burl blank from @Snappo. It is more beautiful than I imagined. It's amazing how much different it looks in person. I am so happy with how dark and rich it looks.
Also, does anyone know if you can request which side of the blank is used for the front of the Nano? As you can tell from my pics I really like the side with the most burls
Indoors with natural light from outside.
Outside.
Also, does anyone know if you can request which side of the blank is used for the front of the Nano? As you can tell from my pics I really like the side with the most burls
Indoors with natural light from outside.
Outside.
Glad you like it as much as I do! Just tell Andy which part of the blank you want to isolate for maximum visual impact; decide top/ bottom orientation, front (little light) and back (plug). I'll bet Andy has that all figured out anyway - he has an uncanny artistic eye!!! One thing is sure ...that Redwood Lace burl is going to make for an AMAZING Nano! Can't wait to see pics!Just got my Redwood Lace Burl blank from @Snappo. It is more beautiful than I imagined. It's amazing how much different it looks in person. I am so happy with how dark and rich it looks.
Also, does anyone know if you can request which side of the blank is used for the front of the Nano? As you can tell from my pics I really like the side with the most burls
Indoors with natural light from outside.
Outside.
Tweak
T\/\/34|<
I still do out of habit. My guess would be how fast you draw and your load size would depend on how often you should stir.
I've been stirring less now, don't usually start stirring until after the first few hits, or as I remember,
.
Enchantre
Oil Painter
Should be fairly quick once shipped... and I only stir after three or four draws. The lighter you load it, the less you'll need to stir. Make it a thin layer, and no stirring required! Thicker loads might need a stir after ~3 hits, depending on temperature, too... hotter=stir more.
Can't wait to hear how much you love it!
ataxian
PALE BLUE DOT
Whatever works for you!
I use the NANO every session lately!
I get 4 - 5 rips with a 18mm glass GònG!
2 rips with a WonG.
My ABV is tan!
FC 187 or D022 work well with a NANO!
I put chillum for my mouth pieces.
When guys were bong crazy I smoked ziz-zags!
I like a smaller mouth piece.
Ash collectors with a sherlock or jhook setups are pretty fun too.
Whatever you decide enjoy flavòr.
Cannabis is the holy grail!
Last edited by a moderator:
mitchgo61
I go where the thrills are
And, one presumes, well-rested?
There is no shade of ABV the Nano can't produce, in my experience. Between the temp range and the adjustable screen, the Nano can do anything.
ataxian
PALE BLUE DOT
I'm à medical patient that chases flavòr!And, one presumes, well-rested?
There is no shade of ABV the Nano can't produce, in my experience. Between the temp range and the adjustable screen, the Nano can do anything.