Discontinued Pax 2

Status
Not open for further replies.

jambandphan03

in flavor country
You are able to use the PAX 1 wall adapter to charge PAX 2, but I don't advise on anyone using any other AC adapter other than ours as damage stemming from it could very well void the warranty. We will also have a PAX 2 wall charger as an accessory.

USB, though, is fair game with regard to their power source, but keep in mind the charge time will be slower based on its rating.



I'll check with @scott_dunlap on lid for ya! I paid close attention when heating mine up for the first time (on high) and didn't notice any off-gassing.

Ojan_at_PAX Are these type of USB wall adapters safe to use for charging? If I had any complaints at all before having one, it would be that there is no wall plug in the kit. Also I have a car adapter that I used to plug my pax1 charger into, will that be safe for the pax2?

U255HZF.jpg
2N4SYJ0.jpg
 

Ojan_at_PAX

Social Media Manager @ PAX
Company Rep
Ojan_at_PAX Are these type of USB wall adapters safe to use for charging? If I had any complaints at all before having one, it would be that there is no wall plug in the kit. Also I have a car adapter that I used to plug my pax1 charger into, will that be safe for the pax2?

U255HZF.jpg
2N4SYJ0.jpg

USB adapters like that are what I'm currently using, but be sure to mind the output voltage and the adapter's rating to get an idea of charge times. Our AC wall adapter puts out 9v and will fully charge PAX 2 in 2 hours (1hr to 80%). Most smart phones and tablets come with 5V output, 1-2A adapters (2hr to 80%, 3hr to 100%). Almost all computers made in the last 6 years are 1A.

Edit: Oh, forgot to address the P1 car charger! I've received confirmation that the wall adapter is good to go, but will have to keep bugging the engineers about the car charger. I'll report back as soon as I get confirmation one way or the other.
 
Last edited:

420blazeit

New Member
Maybe @Ojan_at_PAX can help me with this inquiry

I am looking to order a Pax 2 as soon as i can based on reviews from this thread :brow:

However i am from Australia. I have observed people speaking of the company selling internationally, do you know if this will be happening anytime soon?
 

Ojan_at_PAX

Social Media Manager @ PAX
Company Rep
Maybe @Ojan_at_PAX can help me with this inquiry

I am looking to order a Pax 2 as soon as i can based on reviews from this thread :brow:

However i am from Australia. I have observed people speaking of the company selling internationally, do you know if this will be happening anytime soon?

I likely won't know anything until moves are actually being made. It's a bit above my pay grade, but maybe @scott_dunlap will have some insight in the future so keep an eye out :)
 

SmorezNTickles

It's real.
So my birthday is coming up soon and I was wondering if what they sent you was a coupon? If yes, then, @Ojan_at_PAX is there any way you can tell me if I'd be able to apply it to the Pax 2? :brow:
 
SmorezNTickles,

microduck

elementary vaporist
it kinda looks like in sneekypete's review that little white hairs are on the pipe cleaner that comes in the cleaning kit with the pax2... and i know it was mentioned earlier in this thread about the small white hairs that are in the picture on top of pakalolo's picture of the pax2 with the mp off (first page) - im wondering if they make the pipe cleaners out of pakalolos cat hair, or if the hair is just from the cleaner thing itself?
 

HerbieVonVapster

Well-Known Member
Really like what I reading so far. Wondering how strong the charging connection holds itself in place. Would it stay connected and charge in a bag that was being carried around?

Kinda hoping they offer a trade in program my current unit works great, well except for wearing down where connects to charger. It now takes a lot of taps jiggles shakes to get it to make charging connections. Need to send it in for replacement someday. Just been wrapped up in other units.
 
HerbieVonVapster,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Sneaky Pete's review is thorough and I'm happy to report that it confirms what I've been posting here. I do think he made a big production out of a little one with the cleaning, but as he kept saying, he waited too long.

Re the battery life: yesterday mine finally dropped to a single petal of charge (25% or less). I haven't been tracking how much I've used it on this charge, but I decided to see how much I could get out of it before the battery was completely drained. For reference, each time I heated it up I took 3 10 second hits about 30 seconds apart, then turned it off. I heated it to one petal twice, two petals once, three petals twice, and four petals once. I got three red flashes and shutdown while trying to get to four petals a second time. I thought that was impressive.

That was the first time I drained the battery completely and unless I do more testing, it will probably be the last. A full charge using my computer port (the slowest method) took 3 hours, 3 minutes, and 8 seconds. I know the precise time because I recorded a video of it. Now that it's fully charged, I want to do a battery life test but I haven't yet figured out a good regime that doesn't depend on watching timers and such. This sort of testing lends itself to distractions :ko: and forgetting where I was. :hmm:

it kinda looks like in sneekypete's review that little white hairs are on the pipe cleaner that comes in the cleaning kit with the pax2... and i know it was mentioned earlier in this thread about the small white hairs that are in the picture on top of pakalolo's picture of the pax2 with the mp off (first page) - im wondering if they make the pipe cleaners out of pakalolos cat hair, or if the hair is just from the cleaner thing itself?

I wish. I could make a fortune since my cat produces that stuff at an amazing rate, and everything I wear acts as a superb collector, especially if it's black. The pipe cleaners don't shed, however, and I really don't think they have anything to do with what you can see in my picture. I'm pretty sure that all of that collected from my handling and failure to clean it off before taking picture. I'll definitely be more careful in the future.

Really like what I reading so far. Wondering how strong the charging connection holds itself in place. Would it stay connected and charge in a bag that was being carried around?

Kinda hoping they offer a trade in program my current unit works great, well except for wearing down where connects to charger. It now takes a lot of taps jiggles shakes to get it to make charging connections. Need to send it in for replacement someday. Just been wrapped up in other units.

No it wouldn't. The magnets are strong enough to ensure that the Pax 2 makes a good connection to the charging cradle, but almost any movement will break the hold.
 

SmorezNTickles

It's real.
Re the battery life: yesterday mine finally dropped to a single petal of charge (25% or less). I haven't been tracking how much I've used it on this charge, but I decided to see how much I could get out of it before the battery was completely drained. For reference, each time I heated it up I took 3 10 second hits about 30 seconds apart, then turned it off. I heated it to one petal twice, two petals once, three petals twice, and four petals once. I got three red flashes and shutdown while trying to get to four petals a second time. I thought that was impressive.
So just to clarify, did you finish the bowl within those 4 temp changes, 3, 10 second draws at each? Or did you swap out material?
 
Last edited:
SmorezNTickles,

pakalolo

Toolbag v1.1 (candidate)
Staff member
So just to clarify, did you finish the bowl within those 4 temp changes, 3, 10 second draws at each? Or did you swap our material?

I didn't mention that because I was commenting on battery life, but it's a fair question. It was my usual .07g medium grind without packing, and it probably had at least 2-3 more hits in it. Keep in mind that I tolerate a lot more flavour change than many people. This tasted cooked but not bitter.
 

SmorezNTickles

It's real.
I didn't mention that because I was commenting on battery life, but it's a fair question. It was my usual .07g medium grind without packing, and it probably had at least 2-3 more hits in it. Keep in mind that I tolerate a lot more flavour change than many people. This tasted cooked but not bitter.
Thanks Pak and yeah just wanted to get another take on how long everything lasted.
 
SmorezNTickles,

Jethro

Well-Known Member
I disagree. I'm absolutely certain that lots of people who didn't like the original will love the new Pax 2. A lot of people disliked the original Pax for things that the Pax 2 fixes. For example, it's gone from a high maintenance device to low maintenance. Many people felt the original was a herb hog with rapidly deteriorating flavour. My experience is that both of these problems have been remedied. I easily get 12-15 10-second hits on the Pax 2 and the taste is still pretty good.

Pak... I greatly apologize if this has been asked and addressed already, but I just read the thread quickly and didn't see anyone asking the same specific question. Regarding the taste, do you have any guess or theory as to why the taste is better on the P2 over the P1? And why would the P2 conserve more herb? It seems both devices share a similar design as far as the mechanics of the oven, which is why I am curious.
 
Jethro,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Pak... I greatly apologize if this has been asked and addressed already, but I just read the thread quickly and didn't see anyone asking the same specific question. Regarding the taste, do you have any guess or theory as to why the taste is better on the P2 over the P1? And why would the P2 conserve more herb? It seems both devices share a similar design as far as the mechanics of the oven, which is why I am curious.

This has been discussed many times already in this thread, it is the deeper narrower oven, and the lip sensing heating algorithm that make it different
 

Zing_Popo

New Member
there is always something like this odor control pouch I found on amazon... doesn't have the size listed, but says you can fit your fist in it LOL what kind of answer was that? :p At $10 I just decided to get it, I'll post if the pax2 fits in there with some herbs :) might be a good odor solution for being in close spaces with sensitive noses.

http://www.amazon.com/Funk-Fighter-...d=1427168382&sr=8-14&keywords=smell+proof+bag

** decided to dig a little the size is 5” x 4”

I was wondering if you had received this pouch yet, and if you had: how well does it work?
 
Zing_Popo,
  • Like
Reactions: willieR

jambandphan03

in flavor country
I was wondering if you had received this pouch yet, and if you had: how well does it work?
It's still shipping to me,**edit

It just showed up :D so I have stuck one of my most fragrant buds in there, and can't smell anything from the outside. Seeing that I just got it, I will need to put it to more use before giving it a full thumbs up. See how it handles the toasted herb smells. Here's a fast pic I took for size reference. I'm pretty sure this has plenty of space for a pax2 and some extras...

jPsxh6i.jpg




Confirmed: P1 car charger works with P2 :)

thanks for checking on that! Much appreciated!
 
Last edited:

jambandphan03

in flavor country
That's the pocket one? I thought it'd look smaller
yep that's the one I ordered, so it is what it is... thought it would be a little smaller myself. I don't want to hyjack this thread too much here, so if you have any more questions, send me a PM :D

Once I have my pax2 and can evaluate it properly I'll post an update.
 
jambandphan03,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Pak... I greatly apologize if this has been asked and addressed already, but I just read the thread quickly and didn't see anyone asking the same specific question. Regarding the taste, do you have any guess or theory as to why the taste is better on the P2 over the P1? And why would the P2 conserve more herb? It seems both devices share a similar design as far as the mechanics of the oven, which is why I am curious.

@Shit Snacks summed it up nicely. The oven design has actually changed more than you think. The dimensions are different, the screen allows 50% more airflow, and the oven lid is no longer metal. I think that last point is a major factor in the improvement.
 
Status
Not open for further replies.
Top Bottom