midwesttacs
Member
Ordered the wrong size gong 
should've went with the 14mm but picked the 18mm thinking it would fit.
should've went with the 14mm but picked the 18mm thinking it would fit.
E-Nano from Epickai
ataxian
PALE BLUE DOT
AdaptorsOrdered the wrong size gong
I prefer 18mm GonG's!
ShadyCrop
Well-Known Member
So far I've tried goo gone extreme, 91% ISO, and several other cleaners with no success
I'm not sure what this residue is, it kind of looks like it could be melted plastic from the plastic tube it came in. Even after all the solvents I've used it still doesn't come off at all if I scrub it. I'll probably end up sending it in and/or asking for a new one.
Luckily I've been able to use the silicone from the GonG to attach the straight tube to my piece, even with the setback I'm lovin' this thing.midwesttacs
Member
Do they sell adaptors on the website??
ctxgooner
gooner
Have you tried torching it??So far I've tried goo gone extreme, 91% ISO, and several other cleaners with no success
Melting Pot
Sick & Twisted
No check out I-offer or you're LHS local head shop @ataxian can give u better places to look.
Maybe an exzacto knife I think I fucked up that word. Lol
Tomorrow I learn to multi quote and I'm going to figure out how to get my or an avitar. I tried to put a giff in it didn't work. Lol
Last edited by a moderator:
Uzer
Well-Known Member
I second the torch-it idea. If it is melted plastic a butane torch should burn it off, even a regular lighter I guess?.
I got a Solo GonG from PlanetVape that had a black marker line embedded in the glass where the air channel was poorly cut, even a torch didn't touch it. I'd like to know what this ink is, It's still on there.
The only residue that is possible is graphite which is used in the molding process. Soap and scrub pad are usually enough to remove it, or get an RMA and we'll replace it. Small cracks are normal,add character and are nothing to worry about. If the crack turns into a split it will be replaced as well.
ShadyCrop
Well-Known Member
Thanks for the response! The nano looks beautiful, it's a relief the crack isn't an issue I just wasn't sure if that was normal or not. I'm not sure why this residue won't come out it's the damnedest thing, I've tried everything at my disposal and I just can't get rid of it haha. I'll make an RMA request on the site to get it all sorted out. I'm very satisfied with the nano though, the thing is a beast.
*plainlazy*
Well-Known Member
Got an email from andy today saying the missing socket and cork feet will be posted today :-) so enano should be up and running again in a week to 10 days time depending on post
@hiphopvaporman look here in this thread. Enano would make a great first vape. If it doesn't have to be portable.
Scandinavianinstruckt
New Member
Hello all!
My e-nano came in the mail yesterday, along with D020-D. I already have a Firewood 2.1, but was looking forward to denser clouds. It does not meet my expectations.
The problem is that it doesn't get hot enough. So I tried to torch the herbs by setting the dail to 10, but the AVB stops at light brown. Can I adjust the dial, so my 10 can be a 5?
I should mentions that I use a 50w step down converter. I'm also using a bubbler with the e-nano for the first time as well.
My e-nano came in the mail yesterday, along with D020-D. I already have a Firewood 2.1, but was looking forward to denser clouds. It does not meet my expectations.
The problem is that it doesn't get hot enough. So I tried to torch the herbs by setting the dail to 10, but the AVB stops at light brown. Can I adjust the dial, so my 10 can be a 5?
I should mentions that I use a 50w step down converter. I'm also using a bubbler with the e-nano for the first time as well.
Welcome!
Your experiences are NOT different. Most of us had the same impression to start.
Here's the trick with log vaporizers - LET IT HEAT UP! You cannot turn the Nano on, and vaporizer 5 minutes later. I highly HIGHLY suggest you give the vaporizer 20 minutes to heat up to the temperature yo uset before you use it (I personally leave my Nano running at 6.5 all day long, all night long, for months at a time)
I would never go close to 10 with a fully pre-heated nano.
50 watts should be more than enough to use the vaporizer.
Also, measure your basket depth - your basket screen should be 15mm deep (The notch on your e-pik is approximately 15mm long)
Your experiences are NOT different. Most of us had the same impression to start.
Here's the trick with log vaporizers - LET IT HEAT UP! You cannot turn the Nano on, and vaporizer 5 minutes later. I highly HIGHLY suggest you give the vaporizer 20 minutes to heat up to the temperature yo uset before you use it (I personally leave my Nano running at 6.5 all day long, all night long, for months at a time)
I would never go close to 10 with a fully pre-heated nano.
50 watts should be more than enough to use the vaporizer.
Also, measure your basket depth - your basket screen should be 15mm deep (The notch on your e-pik is approximately 15mm long)
Melting Pot
Sick & Twisted
@Ratchett hit all the nail's on the head pre heat and get I chop stick or wooden skewers
That way u can adjust from both ends. The screen that is .HaHa My couch ate my E-pic so once I find my sweet spot I slide the nylon to mark my spot .Hope this helps
My nano will put me in a coughing fit. 6.4 for me.
I'm the minority use mine 99.9% dry.
I have to be sick to break out GB-187
I've never timed it but for me I think its usable after 5 minutes. These days I don't pay attention to that because I've learned to turn it on before hand. I leave it on if I'm in for the night.
Draw speed can be a factor if the vape hasn't been on long enough for proper heat.
I wonder if there's a break in period for heating speeds..
Draw speed can be a factor if the vape hasn't been on long enough for proper heat.
I wonder if there's a break in period for heating speeds..
Scandinavianinstruckt
New Member
@Ratchett hit all the nail's on the head pre heat and get I chop stick or wooden skewers
That way u can adjust from both ends. The screen that is .HaHa My couch ate my E-pic so once I find my sweet spot I slide the nylon to mark my spot .Hope this helps
My nano will put me in a coughing fit. 6.4 for me.
I'm the minority use mine 99.9% dry.
I have to be sick to break out GB-187
Thanks for your tip!
I actually let the vaporizer heat up on the highest setting for an hour. That gave me one small cloud.
I might be using it wrong. I used to take 30-40 seconds inhale with my Firewood 2.1, so I also inhale somewhat slowly even with the D020-D. I guess my inhale lasts about 15-20 seconds with the e-nano and D020-D.
As for the distance between the heater and basket. I followed a woman's advice on YouTube. Apparently one if the users here on FC made a 13 minute tutorial for the e-nano and put it on YouTube.
Maybe try practicing with the dry stem and no water pipe. With a clean stem you can see the vapor and learn how to controlled the density.
Scandinavianinstruckt
New Member
I think I'll try both of your tips tonight. I'm also going to let it heat up for more than an hour. Thanks!
ataxian
PALE BLUE DOT
Check out: Oregon Glass Blowers, ebay, dhgate or your local smoke shop.
Think like a plumber!
Heating for 1 hour should be enough time.
How much herb are you loading into the stem? I typically get best results with around 0.1g (although some people use less with no problem).
Your herbs should be less than 1mm away from the heat.
If that doesn't work, the only other thing I could suggest is to try an alternative power inverter
Sounds like it might be your converter. You can buy a 'Kill a Watt' for about $20 plug it in and see how many watts your Nano is drawing at '10' It should be a tad more than 14 watts or there is a problem with the converter.
Tell me this case that came with my enail wasnt made for the e nano!
http://imgur.com/6PzgZo2
Can even fit the stand in there.
http://imgur.com/6PzgZo2
Can even fit the stand in there.
Here's an E-nano curiosity that I would bet I'm the only one who has one. Yesterday I received my replacement aluminum stand because I received a really weird one.
I don't know if the one on top was a prototype that was accidentally shipped or a blank that had not gone through the final CNC machining (probably the latter).
Please note: I'm not posting this to highlight a flaw or shortcoming in any way, but just to show off a curiosity that tells the story of how our stuff gets made before I send it back. Andy and Nadia have treated me very very well, and replaced an entire order that had been busted open in shipping. But I thought it was neat to figure out that a cast blank with most of the cutouts already done would make for a lot less work for the CNC to finish up the detail work.
And besides, I love this device so much that I've got a form of vaping Stockholm syndrome. @ACE OF VAPE pretty much can do no wrong in my eyes, as this device isn't just for fun: it seriously improves the quality of my life. Every day. That's why I have two of these:
I don't know if the one on top was a prototype that was accidentally shipped or a blank that had not gone through the final CNC machining (probably the latter).
Please note: I'm not posting this to highlight a flaw or shortcoming in any way, but just to show off a curiosity that tells the story of how our stuff gets made before I send it back. Andy and Nadia have treated me very very well, and replaced an entire order that had been busted open in shipping. But I thought it was neat to figure out that a cast blank with most of the cutouts already done would make for a lot less work for the CNC to finish up the detail work.
And besides, I love this device so much that I've got a form of vaping Stockholm syndrome. @ACE OF VAPE pretty much can do no wrong in my eyes, as this device isn't just for fun: it seriously improves the quality of my life. Every day. That's why I have two of these:
Last edited: